Return-Path: From: Jaganath Kanakkassery To: linux-bluetooth@vger.kernel.org Cc: Jaganath Kanakkassery Subject: [PATCH 2/3] doc/mgmt-api: Add support for Set default Phy command Date: Tue, 14 Nov 2017 16:02:17 +0530 Message-Id: <1510655538-12883-4-git-send-email-jaganathx.kanakkassery@intel.com> In-Reply-To: <1510655538-12883-1-git-send-email-jaganathx.kanakkassery@intel.com> References: <1510655538-12883-1-git-send-email-jaganathx.kanakkassery@intel.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: --- doc/mgmt-api.txt | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index 80edb14..25739cc 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -2940,6 +2940,42 @@ Get Supported PHYs Command Possible errors: Not Supported Invalid Index +Set Default PHY Command +========================== + + Command Code: 0x0044 + Controller Index: + Command Parameters: Default_phy (1 Octet) + Return Parameters: + + This command is used to set the default phy to the controller. + + This will be stored and used for all the subsequent scanning + and connection initiation. + + Prior to this, Get Supported PHYs Command shall be called + to retrieve the supported phys by the controller. If default_phy + has phy not supported by the controller (not there in supported_phys) + then Invalid Parameters will be returned. + + This can be called at any point to change the preferred phys. + + Default_phy is a bitmask with the following bits. + + 0 LE 1M + 1 LE 2M + 2 LE CODED (LR) + + This command generates a Command Complete event on success + or a Command Status event on failure. + + This command is only available for LE capable controllers. + It will return Not Supported otherwise. + + Possible errors: Not Supported + Invalid Parameters + Invalid Index + Command Complete Event ====================== -- 2.7.4