Return-Path: From: Travis Griggs Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 11.0 \(3445.1.7\)) Subject: Get Name in Scan Response? Message-Id: <87796201-DEA7-4158-8822-F461BAF68B78@gmail.com> Date: Thu, 2 Nov 2017 15:35:14 -0700 To: Bluez mailing list Sender: linux-bluetooth-owner@vger.kernel.org List-ID: We=E2=80=99ve been developing products using BlueNRG chips, that act as = BLE peripherals and are connected via Android/iOS devices acting as = centrals to control/configure them. It is desirable to be able to = discover nearby devices and then connect to them. Because of heinous = caching strategies in both Android and iOS just using a previously = connected devices name (derived from the name characteristic). The most = reliable thing to do at the iOS/Droid level is capture the name from the = advertising data and associate that with the device. This is the only = reliable way to have a device determine its name programmatically and = advertise that reliably. I=E2=80=99m trying to do a product with a Pi like SBC that runs BlueZ = with a BLE dongle. I set the device=E2=80=99s alias with: adapterProperties.Set('org.bluez.Adapter1', 'Alias', bleName()) Where bleName() returns the string I want to use for the device. If I = connect a time or two and reboot a time or two, this will eventually = show up as the name property in Android/iOS. But if I try to get it from = the advertising data, there doesn=E2=80=99t seem to be a name in there. = Is this name not set as part of either the advertisement or scan = response packet? I know that when doing a custom service UUID, there is = not enough room in the advertisement packet to have both service UUID = and name, so it has to go in the scan response packet. Can any bluez = developers confirm what I should be expecting to happen with setting the = Alias property? Is there a way to achieve what I want to do? I have an Advertisement = interface that I worked up from the examples that I use to do the = solicitID in. Do I need to shove the name in there somehow additionally? I don=E2=80=99t really know how to parse btmon output, but here=E2=80=99s = what it looks like when I start up my app: ---- sudo btmon [sudo] password for nelson: Bluetooth monitor ver 5.47 =3D Note: Linux version 4.12.8-nelson (armv7l) = = 0.183783 =3D Note: Bluetooth subsystem version 2.22 = = 0.183801 =3D New Index: 5C:F3:70:68:C1:F9 (Primary,USB,hci0) = = [hci0] 0.183806 @ MGMT Open: bluetoothd (privileged) version 1.14 = = {0x0002} 0.183812 @ MGMT Open: bluetoothd (privileged) version 1.14 = = {0x0001} 0.183815 @ MGMT Open: btmon (privileged) version 1.14 = = {0x0003} 0.183941 @ MGMT Command: Set Powered (0x0005) plen 1 = = {0x0001} [hci0] 1049.660570 Powered: Enabled (0x01) =3D Open Index: 5C:F3:70:68:C1:F9 = = [hci0] 1049.661241 < HCI Command: Reset (0x03|0x0003) plen 0 = = #1 [hci0] 1049.663093 > HCI Event: Command Complete (0x0e) plen 4 = = #2 [hci0] 1049.666831 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 = = #3 [hci0] 1049.668313 > HCI Event: Command Complete (0x0e) plen 12 = = #4 [hci0] 1049.669821 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Sniff mode Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Flow control lag (most significant bit) Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Erroneous Data Reporting Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 = = #5 [hci0] 1049.670154 > HCI Event: Command Complete (0x0e) plen 12 = = #6 [hci0] 1049.671828 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 4.0 (0x06) - Revision 4096 (0x1000) LMP version: Bluetooth 4.0 (0x06) - Subversion 8718 (0x220e) Manufacturer: Broadcom Corporation (15) Firmware: 001.002.014 (BCM20702A1) Build: 0000 < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 = = #7 [hci0] 1049.672376 > HCI Event: Command Complete (0x0e) plen 10 = = #8 [hci0] 1049.673826 Read BD ADDR (0x04|0x0009) ncmd 1 Status: Success (0x00) Address: 5C:F3:70:68:C1:F9 (CC&C Technologies, Inc) < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 = = #9 [hci0] 1049.674459 > HCI Event: Command Complete (0x0e) plen 11 = = #10 [hci0] 1049.675829 Read Buffer Size (0x04|0x0005) ncmd 1 Status: Success (0x00) ACL MTU: 1021 ACL max packet: 8 SCO MTU: 64 SCO max packet: 1 < HCI Command: Read Class of Device (0x03|0x0023) plen 0 = = #11 [hci0] 1049.676386 > HCI Event: Command Complete (0x0e) plen 7 = = #12 [hci0] 1049.677827 Read Class of Device (0x03|0x0023) ncmd 1 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Read Local Name (0x03|0x0014) plen 0 = = #13 [hci0] 1049.677974 > HCI Event: Command Complete (0x0e) plen 252 = = #14 [hci0] 1049.694817 Read Local Name (0x03|0x0014) ncmd 1 Status: Success (0x00) Name: BCM20702A < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 = = #15 [hci0] 1049.694983 > HCI Event: Command Complete (0x0e) plen 6 = = #16 [hci0] 1049.696821 Read Voice Setting (0x03|0x0025) ncmd 1 Status: Success (0x00) Setting: 0x0060 Input Coding: Linear Input Data Format: 2's complement Input Sample Size: 16-bit # of bits padding at MSB: 0 Air Coding Format: CVSD < HCI Command: Read Number of Supported IAC (0x03|0x0038) plen 0 = = #17 [hci0] 1049.696988 > HCI Event: Command Complete (0x0e) plen 5 = = #18 [hci0] 1049.698824 Read Number of Supported IAC (0x03|0x0038) ncmd 1 Status: Success (0x00) Number of IAC: 4 < HCI Command: Read Current IAC LAP (0x03|0x0039) plen 0 = = #19 [hci0] 1049.699098 > HCI Event: Command Complete (0x0e) plen 8 = = #20 [hci0] 1049.700826 Read Current IAC LAP (0x03|0x0039) ncmd 1 Status: Success (0x00) Number of IAC: 1 Access code: 0x9e8b33 (General Inquiry) < HCI Command: Set Event Filter (0x03|0x0005) plen 1 = = #21 [hci0] 1049.701013 Type: Clear All Filters (0x00) > HCI Event: Command Complete (0x0e) plen 4 = = #22 [hci0] 1049.702826 Set Event Filter (0x03|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2 = = #23 [hci0] 1049.703056 Timeout: 20000.000 msec (0x7d00) > HCI Event: Command Complete (0x0e) plen 4 = = #24 [hci0] 1049.704818 Write Connection Accept Timeout (0x03|0x0016) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 = = #25 [hci0] 1049.704974 > HCI Event: Command Complete (0x0e) plen 7 = = #26 [hci0] 1049.706825 LE Read Buffer Size (0x08|0x0002) ncmd 1 Status: Success (0x00) Data packet length: 27 Num data packets: 15 < HCI Command: LE Read Local Supported Features (0x08|0x0003) plen 0 = = #27 [hci0] 1049.707125 > HCI Event: Command Complete (0x0e) plen 12 = = #28 [hci0] 1049.708824 LE Read Local Supported Features (0x08|0x0003) ncmd 1 Status: Success (0x00) Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 = = #29 [hci0] 1049.709614 > HCI Event: Command Complete (0x0e) plen 12 = = #30 [hci0] 1049.711827 LE Read Supported States (0x08|0x001c) ncmd 1 Status: Success (0x00) States: 0x000000001fffffff Non-connectable Advertising State Scannable Advertising State Connectable Advertising State High Duty Cycle Directed Advertising State Passive Scanning State Active Scanning State Initiating State and Connection State (Master Role) Connection State (Slave Role) Non-connectable Advertising State and Passive Scanning State Scannable Advertising State and Passive Scanning State Connectable Advertising State and Passive Scanning State High Duty Cycle Directed Advertising State and Passive Scanning State Non-connectable Advertising State and Active Scanning State Scannable Advertising State and Active Scanning State Connectable Advertising State and Active Scanning State High Duty Cycle Directed Advertising State and Active Scanning State Non-connectable Advertising State and Initiating State Scannable Advertising State and Initiating State Non-connectable Advertising State and Connection State (Master Role) Scannable Advertising State and Connection State (Master Role) Non-connectable Advertising State and Connection State (Slave Role) Scannable Advertising State and Connection State (Slave Role) Passive Scanning State and Initiating State Active Scanning State and Initiating State Passive Scanning State and Connection State (Master Role) Active Scanning State and Connection State (Master Role) Passive Scanning State and Connection State (Slave Role) Active Scanning State and Connection State (Slave Role) Initiating State and Connection State (Master Role) and Master Role & Master Role < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 = = #31 [hci0] 1049.712439 > HCI Event: Command Complete (0x0e) plen 68 = = #32 [hci0] 1049.717817 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 161 entries Inquiry (Octet 0 - Bit 0) Inquiry Cancel (Octet 0 - Bit 1) Periodic Inquiry Mode (Octet 0 - Bit 2) Exit Periodic Inquiry Mode (Octet 0 - Bit 3) Create Connection (Octet 0 - Bit 4) Disconnect (Octet 0 - Bit 5) Add SCO Connection (Octet 0 - Bit 6) Create Connection Cancel (Octet 0 - Bit 7) Accept Connection Request (Octet 1 - Bit 0) Reject Connection Request (Octet 1 - Bit 1) Link Key Request Reply (Octet 1 - Bit 2) Link Key Request Negative Reply (Octet 1 - Bit 3) PIN Code Request Reply (Octet 1 - Bit 4) PIN Code Request Negative Reply (Octet 1 - Bit 5) Change Connection Packet Type (Octet 1 - Bit 6) Authentication Requested (Octet 1 - Bit 7) Set Connection Encryption (Octet 2 - Bit 0) Change Connection Link Key (Octet 2 - Bit 1) Master Link Key (Octet 2 - Bit 2) Remote Name Request (Octet 2 - Bit 3) Remote Name Request Cancel (Octet 2 - Bit 4) Read Remote Supported Features (Octet 2 - Bit 5) Read Remote Extended Features (Octet 2 - Bit 6) Read Remote Version Information (Octet 2 - Bit 7) Read Clock Offset (Octet 3 - Bit 0) Read LMP Handle (Octet 3 - Bit 1) Sniff Mode (Octet 4 - Bit 2) Exit Sniff Mode (Octet 4 - Bit 3) QoS Setup (Octet 4 - Bit 6) Role Discovery (Octet 4 - Bit 7) Switch Role (Octet 5 - Bit 0) Read Link Policy Settings (Octet 5 - Bit 1) Write Link Policy Settings (Octet 5 - Bit 2) Read Default Link Policy Settings (Octet 5 - Bit 3) Write Default Link Policy Settings (Octet 5 - Bit 4) Flow Specification (Octet 5 - Bit 5) Set Event Mask (Octet 5 - Bit 6) Reset (Octet 5 - Bit 7) Set Event Filter (Octet 6 - Bit 0) Flush (Octet 6 - Bit 1) Read PIN Type (Octet 6 - Bit 2) Write PIN Type (Octet 6 - Bit 3) Read Stored Link Key (Octet 6 - Bit 5) Write Stored Link Key (Octet 6 - Bit 6) Delete Stored Link Key (Octet 6 - Bit 7) Write Local Name (Octet 7 - Bit 0) Read Local Name (Octet 7 - Bit 1) Read Connection Accept Timeout (Octet 7 - Bit 2) Write Connection Accept Timeout (Octet 7 - Bit 3) Read Page Timeout (Octet 7 - Bit 4) Write Page Timeout (Octet 7 - Bit 5) Read Scan Enable (Octet 7 - Bit 6) Write Scan Enable (Octet 7 - Bit 7) Read Page Scan Activity (Octet 8 - Bit 0) Write Page Scan Activity (Octet 8 - Bit 1) Read Inquiry Scan Activity (Octet 8 - Bit 2) Write Inquiry Scan Activity (Octet 8 - Bit 3) Read Authentication Enable (Octet 8 - Bit 4) Write Authentication Enable (Octet 8 - Bit 5) Read Encryption Mode (Octet 8 - Bit 6) Write Encryption Mode (Octet 8 - Bit 7) Read Class of Device (Octet 9 - Bit 0) Write Class of Device (Octet 9 - Bit 1) Read Voice Setting (Octet 9 - Bit 2) Write Voice Setting (Octet 9 - Bit 3) Read Automatic Flush Timeout (Octet 9 - Bit 4) Write Automatic Flush Timeout (Octet 9 - Bit 5) Read Num Broadcast Retransmissions (Octet 9 - Bit 6) Write Num Broadcast Retransmissions (Octet 9 - Bit 7) Read Transmit Power Level (Octet 10 - Bit 2) Read Sync Flow Control Enable (Octet 10 - Bit 3) Set Controller To Host Flow Control (Octet 10 - Bit 5) Host Buffer Size (Octet 10 - Bit 6) Host Number of Completed Packets (Octet 10 - Bit 7) Read Link Supervision Timeout (Octet 11 - Bit 0) Write Link Supervision Timeout (Octet 11 - Bit 1) Read Number of Supported IAC (Octet 11 - Bit 2) Read Current IAC LAP (Octet 11 - Bit 3) Write Current IAC LAP (Octet 11 - Bit 4) Set AFH Host Channel Classification (Octet 12 - Bit 1) Read Inquiry Scan Type (Octet 12 - Bit 4) Write Inquiry Scan Type (Octet 12 - Bit 5) Read Inquiry Mode (Octet 12 - Bit 6) Write Inquiry Mode (Octet 12 - Bit 7) Read Page Scan Type (Octet 13 - Bit 0) Write Page Scan Type (Octet 13 - Bit 1) Read AFH Channel Assessment Mode (Octet 13 - Bit 2) Write AFH Channel Assessment Mode (Octet 13 - Bit 3) Read Local Version Information (Octet 14 - Bit 3) Read Local Supported Features (Octet 14 - Bit 5) Read Local Extended Features (Octet 14 - Bit 6) Read Buffer Size (Octet 14 - Bit 7) Read BD ADDR (Octet 15 - Bit 1) Read Failed Contact Counter (Octet 15 - Bit 2) Reset Failed Contact Counter (Octet 15 - Bit 3) Read Link Quality (Octet 15 - Bit 4) Read RSSI (Octet 15 - Bit 5) Read AFH Channel Map (Octet 15 - Bit 6) Read Clock (Octet 15 - Bit 7) Read Loopback Mode (Octet 16 - Bit 0) Write Loopback Mode (Octet 16 - Bit 1) Enable Device Under Test Mode (Octet 16 - Bit 2) Setup Synchronous Connection (Octet 16 - Bit 3) Accept Synchronous Connection Request (Octet 16 - Bit 4) Reject Synchronous Connection Request (Octet 16 - Bit 5) Read Extended Inquiry Response (Octet 17 - Bit 0) Write Extended Inquiry Response (Octet 17 - Bit 1) Refresh Encryption Key (Octet 17 - Bit 2) Sniff Subrating (Octet 17 - Bit 4) Read Simple Pairing Mode (Octet 17 - Bit 5) Write Simple Pairing Mode (Octet 17 - Bit 6) Read Local OOB Data (Octet 17 - Bit 7) Read Inquiry Response TX Power Level (Octet 18 - Bit 0) Write Inquiry Transmit Power Level (Octet 18 - Bit 1) Read Default Erroneous Data Reporting (Octet 18 - Bit 2) Write Default Erroneous Data Reporting (Octet 18 - Bit 3) IO Capability Request Reply (Octet 18 - Bit 7) User Confirmation Request Reply (Octet 19 - Bit 0) User Confirmation Request Neg Reply (Octet 19 - Bit 1) User Passkey Request Reply (Octet 19 - Bit 2) User Passkey Request Negative Reply (Octet 19 - Bit 3) Remote OOB Data Request Reply (Octet 19 - Bit 4) Write Simple Pairing Debug Mode (Octet 19 - Bit 5) Enhanced Flush (Octet 19 - Bit 6) Remote OOB Data Request Neg Reply (Octet 19 - Bit 7) Send Keypress Notification (Octet 20 - Bit 2) IO Capability Request Negative Reply (Octet 20 - Bit 3) Read Encryption Key Size (Octet 20 - Bit 4) Read Enhanced Transmit Power Level (Octet 24 - Bit 0) Read LE Host Supported (Octet 24 - Bit 5) Write LE Host Supported (Octet 24 - Bit 6) LE Set Event Mask (Octet 25 - Bit 0) LE Read Buffer Size (Octet 25 - Bit 1) LE Read Local Supported Features (Octet 25 - Bit 2) LE Set Random Address (Octet 25 - Bit 4) LE Set Advertising Parameters (Octet 25 - Bit 5) LE Read Advertising Channel TX Power (Octet 25 - Bit 6) LE Set Advertising Data (Octet 25 - Bit 7) LE Set Scan Response Data (Octet 26 - Bit 0) LE Set Advertise Enable (Octet 26 - Bit 1) LE Set Scan Parameters (Octet 26 - Bit 2) LE Set Scan Enable (Octet 26 - Bit 3) LE Create Connection (Octet 26 - Bit 4) LE Create Connection Cancel (Octet 26 - Bit 5) LE Read White List Size (Octet 26 - Bit 6) LE Clear White List (Octet 26 - Bit 7) LE Add Device To White List (Octet 27 - Bit 0) LE Remove Device =46rom White List (Octet 27 - Bit 1) LE Connection Update (Octet 27 - Bit 2) LE Set Host Channel Classification (Octet 27 - Bit 3) LE Read Channel Map (Octet 27 - Bit 4) LE Read Remote Used Features (Octet 27 - Bit 5) LE Encrypt (Octet 27 - Bit 6) LE Rand (Octet 27 - Bit 7) LE Start Encryption (Octet 28 - Bit 0) LE Long Term Key Request Reply (Octet 28 - Bit 1) LE Long Term Key Request Neg Reply (Octet 28 - Bit 2) LE Read Supported States (Octet 28 - Bit 3) LE Receiver Test (Octet 28 - Bit 4) LE Transmitter Test (Octet 28 - Bit 5) LE Test End (Octet 28 - Bit 6) < HCI Command: Write Simple Pairing Mode (0x03|0x0056) plen 1 = = #33 [hci0] 1049.718291 Mode: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 = = #34 [hci0] 1049.783828 Write Simple Pairing Mode (0x03|0x0056) ncmd 1 Status: Success (0x00) < HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1 = = #35 [hci0] 1049.784435 Mode: Inquiry Result with RSSI or Extended Inquiry Result (0x02) > HCI Event: Command Complete (0x0e) plen 4 = = #36 [hci0] 1049.785815 Write Inquiry Mode (0x03|0x0045) ncmd 1 Status: Success (0x00) < HCI Command: Read Inquiry Response TX Power Level (0x03|0x0058) plen 0 = = #37 [hci0] 1049.786563 > HCI Event: Command Complete (0x0e) plen 5 = = #38 [hci0] 1049.788806 Read Inquiry Response TX Power Level (0x03|0x0058) ncmd 1 Status: Success (0x00) TX power: 0 dbm (0x00) < HCI Command: Read Local Extended Features (0x04|0x0004) plen 1 = = #39 [hci0] 1049.788905 Page: 1 > HCI Event: Command Complete (0x0e) plen 14 = = #40 [hci0] 1049.790815 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 1/1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) < HCI Command: Set Event Mask (0x03|0x0001) plen 8 = = #41 [hci0] 1049.791732 Mask: 0x3dbff807fffbffff Inquiry Complete Inquiry Result Connection Complete Connection Request Disconnection Complete Authentication Complete Remote Name Request Complete Encryption Change Change Connection Link Key Complete Master Link Key Complete Read Remote Supported Features Complete Read Remote Version Information Complete QoS Setup Complete Command Complete Command Status Hardware Error Flush Occurred Role Change Mode Change Return Link Keys PIN Code Request Link Key Request Link Key Notification Loopback Command Data Buffer Overflow Max Slots Change Read Clock Offset Complete Connection Packet Type Changed QoS Violation Page Scan Mode Change Page Scan Repetition Mode Change Flow Specification Complete Inquiry Result with RSSI Read Remote Extended Features Complete Synchronous Connection Complete Synchronous Connection Changed Sniff Subrating Extended Inquiry Result Encryption Key Refresh Complete IO Capability Request IO Capability Request Reply User Confirmation Request User Passkey Request Remote OOB Data Request Simple Pairing Complete Link Supervision Timeout Changed Enhanced Flush Complete User Passkey Notification Keypress Notification Remote Host Supported Features Notification LE Meta > HCI Event: Command Complete (0x0e) plen 4 = = #42 [hci0] 1049.793832 Set Event Mask (0x03|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 = = #43 [hci0] 1049.794006 Address: 00:00:00:00:00:00 (OUI 00-00-00) Read all: 0x01 > HCI Event: Command Complete (0x0e) plen 8 = = #44 [hci0] 1049.795808 Read Stored Link Key (0x03|0x000d) ncmd 1 Status: Success (0x00) Max num keys: 1 Num keys: 0 < HCI Command: Write Default Link Policy Settings (0x02|0x000f) plen 2 = = #45 [hci0] 1049.796050 Link policy: 0x0005 Enable Role Switch Enable Sniff Mode > HCI Event: Command Complete (0x0e) plen 4 = = #46 [hci0] 1049.797817 Write Default Link Policy Settings (0x02|0x000f) ncmd 1 Status: Success (0x00) < HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 = = #47 [hci0] 1049.797939 > HCI Event: Command Complete (0x0e) plen 8 = = #48 [hci0] 1049.799821 Read Page Scan Activity (0x03|0x001b) ncmd 1 Status: Success (0x00) Interval: 1280.000 msec (0x0800) Window: 11.250 msec (0x0012) < HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 = = #49 [hci0] 1049.799939 > HCI Event: Command Complete (0x0e) plen 5 = = #50 [hci0] 1049.801825 Read Page Scan Type (0x03|0x0046) ncmd 1 Status: Success (0x00) Type: Standard Scan (0x00) < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 = = #51 [hci0] 1049.801989 Mask: 0x000000000000001f LE Connection Complete LE Advertising Report LE Connection Update Complete LE Read Remote Used Features Complete LE Long Term Key Request > HCI Event: Command Complete (0x0e) plen 4 = = #52 [hci0] 1049.803822 LE Set Event Mask (0x08|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Advertising Channel TX Power (0x08|0x0007) plen 0 = = #53 [hci0] 1049.803952 > HCI Event: Command Complete (0x0e) plen 5 = = #54 [hci0] 1049.805815 LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1 Status: Success (0x00) TX power: 4 dbm (0x04) < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 = = #55 [hci0] 1049.806071 > HCI Event: Command Complete (0x0e) plen 5 = = #56 [hci0] 1049.807817 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 32 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 = = #57 [hci0] 1049.808027 > HCI Event: Command Complete (0x0e) plen 4 = = #58 [hci0] 1049.809820 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: Write LE Host Supported (0x03|0x006d) plen 2 = = #59 [hci0] 1049.809953 Supported: 0x01 Simultaneous: 0x00 > HCI Event: Command Complete (0x0e) plen 4 = = #60 [hci0] 1049.811816 Write LE Host Supported (0x03|0x006d) ncmd 1 Status: Success (0x00) < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7 = = #61 [hci0] 1049.812072 Address: 00:00:00:00:00:00 (OUI 00-00-00) Delete all: 0x01 > HCI Event: Command Complete (0x0e) plen 6 = = #62 [hci0] 1049.813823 Delete Stored Link Key (0x03|0x0012) ncmd 1 Status: Success (0x00) Num keys: 0 =3D Index Info: 5C:F3:70:68:C1:F9 (Broadcom Corporation) = = [hci0] 1049.814026 < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 = = #63 [hci0] 1049.814229 Length: 3 TX power: 4 dBm > HCI Event: Command Complete (0x0e) plen 4 = = #64 [hci0] 1049.815821 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Response Data (0x08|0x0009) plen 32 = = #65 [hci0] 1049.815970 Length: 13 Name (short): PILOT-FFED > HCI Event: Command Complete (0x0e) plen 4 = = #66 [hci0] 1049.817815 LE Set Scan Response Data (0x08|0x0009) ncmd 1 Status: Success (0x00) < HCI Command: Write Local Name (0x03|0x0013) plen 248 = = #67 [hci0] 1049.818082 Name: PILOT-FFED98 > HCI Event: Command Complete (0x0e) plen 4 = = #68 [hci0] 1049.820841 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241 = = #69 [hci0] 1049.821084 FEC: Not required (0x00) Name (complete): PILOT-FFED98 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.2.15 (0x052f) 16-bit Service UUIDs (complete): 2 entries Generic Access Profile (0x1800) Generic Attribute Profile (0x1801) > HCI Event: Command Complete (0x0e) plen 4 = = #70 [hci0] 1049.823816 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 = = {0x0001} [hci0] 1049.824091 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 = = {0x0003} [hci0] 1049.824114 Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 = = {0x0002} [hci0] 1049.824114 Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Add Advertising (0x003e) plen 29 = = {0x0002} [hci0] 1050.209116 Instance: 1 Flags: 0x00000003 Switch into Connectable mode Advertise as Discoverable Duration: 0 Timeout: 0 Advertising data length: 18 128-bit Service UUIDs (complete): 1 entry Vendor specific (00000000-08af-41c0-8048-4215e1560a37) Scan response length: 0 @ MGMT Event: Advertising Added (0x0023) plen 1 = = {0x0003} [hci0] 1050.209149 Instance: 1 @ MGMT Event: Advertising Added (0x0023) plen 1 = = {0x0001} [hci0] 1050.209149 Instance: 1 < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 = = #71 [hci0] 1050.214845 Length: 21 Flags: 0x02 LE General Discoverable Mode 128-bit Service UUIDs (complete): 1 entry Vendor specific (00000000-08af-41c0-8048-4215e1560a37) > HCI Event: Command Complete (0x0e) plen 4 = = #72 [hci0] 1050.216824 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Response Data (0x08|0x0009) plen 32 = = #73 [hci0] 1050.217797 Length: 0 > HCI Event: Command Complete (0x0e) plen 4 = = #74 [hci0] 1050.219823 LE Set Scan Response Data (0x08|0x0009) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15 = = #75 [hci0] 1050.220255 Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Type: Connectable undirected - ADV_IND (0x00) Own address type: Public (0x00) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Channel map: 37, 38, 39 (0x07) Filter policy: Allow Scan Request from Any, Allow Connect = Request from Any (0x00) > HCI Event: Command Complete (0x0e) plen 4 = = #76 [hci0] 1050.221822 LE Set Advertising Parameters (0x08|0x0006) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 = = #77 [hci0] 1050.222283 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 = = #78 [hci0] 1050.223815 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 = = {0x0002} [hci0] 1050.223943 Add Advertising (0x003e) plen 1 Status: Success (0x00) Instance: 1