Return-Path: Date: Fri, 29 Dec 2017 16:12:41 +0100 From: Lukas Wunner To: Loic Poulain Cc: =?iso-8859-1?Q?Fr=E9d=E9ric?= Danis , Linus Walleij , Andy Shevchenko , Marcel Holtmann , Johan Hedberg , Mika Westerberg , Hans de Goede , Max Shavrick , Leif Liddy , Daniel Roschka , Ronald Tschalaer , "Peter Y. Chuang" , "open list:BLUETOOTH DRIVERS" Subject: Re: [PATCH 3/3] Bluetooth: Avoid WARN splat due to missing GPIOLIB Message-ID: <20171229151241.GA8078@wunner.de> References: <5e3106d673c3c41bf92c91f1f43bf30682511366.1514143015.git.lukas@wunner.de> <9ef8be4ef80c38b693e5755c738a88de9c907944.1514143015.git.lukas@wunner.de> <1514450477.7000.302.camel@linux.intel.com> <20171228091805.GA1559@wunner.de> <1514453177.7000.320.camel@linux.intel.com> <1514464858.7000.334.camel@linux.intel.com> <20171229095135.GA25623@wunner.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 In-Reply-To: List-ID: On Fri, Dec 29, 2017 at 03:18:44PM +0100, Loic Poulain wrote: > On 29 December 2017 at 10:51, Lukas Wunner wrote: > > On Thu, Dec 28, 2017 at 01:45:34PM +0100, Linus Walleij wrote: > >> On Thu, Dec 28, 2017 at 1:40 PM, Andy Shevchenko wrote: > >> > On Thu, 2017-12-28 at 13:29 +0100, Linus Walleij wrote: > >> >> On Thu, Dec 28, 2017 at 10:26 AM, Andy Shevchenko wrote: > >> >> > On Thu, 2017-12-28 at 10:18 +0100, Lukas Wunner wrote: > >> >> > > On Thu, Dec 28, 2017 at 10:41:17AM +0200, Andy Shevchenko wrote: > >> >> > > > On Tue, 2017-12-26 at 17:07 +0200, Lukas Wunner wrote: > >> >> > > Hm okay, Documentation/gpio/consumer.txt says: > >> >> > > > >> >> > > Guidelines for GPIOs consumers > >> >> > > ============================== > >> >> > > > >> >> > > Drivers that can't work without standard GPIO calls should have > >> >> > > Kconfig entries that depend on GPIOLIB. > >> >> > > > >> >> > > So a "depends on GPIOLIB" would be more appropriate, right? > >> >> > > >> >> > Yes, but still wrong for this certain driver. It *can* work w/o > >> >> > GPIOLIB. > >> >> > Now you have done unnecessary dependency for that case. > >> >> > >> >> No I think it should use depends on GPIOLIB. > >> >> > >> >> The reason is that the driver uses unconditional devm_gpiod_get(), > >> >> not devm_gpiod_get_optional(). > >> > > >> > How come? > >> > I just checked the code, all three use _optional() variant. > >> > > >> > I checked in bcm_get_resources(). > > > > Even though hci_bcm.c uses devm_gpiod_get_optional() for the device > > wakeup and shutdown pins, it calls gpiod_set_value() on both pins > > without checking if the're NULL in bcm_gpio_set_power(). > > > > It also calls gpiod_to_irq() on the host wakeup pin without checking > > if it's NULL in bcm_get_resources(), which results in a WARN splat > > if GPIOLIB is not enabled. > > > > So this is clearly wrong. The problem is, I don't have this hardware > > to test myself, I don't have a spec for the chip and I don't know > > what the driver author's intention was. Perhaps these are just glitches > > that snuck in when power management was retrofitted into the driver > > and we can fix them with a few NULL pointer checks. But I'm not sure > > if these pins are really optional. > > I think this is due to the adaptation to serdev bus support, originally a > platform device was only added to describe power control resources > (via ACPI/DT), there was no associated pdev for non 'gpio-controllable' > devices and so no gpio action. Now that serdev is supported I agree > that some pointer checks should be added. You're correct that GPIO use was originally mandatory in this driver, but serdev has nothing to do with it becoming optional. Rather, commit 62aaefa7d038 ("Bluetooth: hci_bcm: improve use of gpios API") added the _optional "to simplify error handling". So the _optional is a red herring and GPIO use is not optional at all in this driver. Adding Uwe Kleine-K?nig to cc. Thanks, Lukas