Return-Path: Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 11.2 \(3445.5.20\)) Subject: Re: [PATCH RESEND] Bluetooth: btbcm: Add entry for BCM4343A0 UART bluetooth From: Marcel Holtmann In-Reply-To: <20180118092155.3595-1-joerg.krause@embedded.rocks> Date: Thu, 18 Jan 2018 10:25:00 +0100 Cc: "open list:BLUETOOTH DRIVERS" , "Gustavo F. Padovan" Message-Id: <98813AEE-B05E-4170-A75A-BEE7D99DCF62@holtmann.org> References: <20180118092155.3595-1-joerg.krause@embedded.rocks> To: =?utf-8?Q?J=C3=B6rg_Krause?= Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Joerg, > RESEND using Content-Transfer-Encoding: 8bit instead of base64. > > This patch adds the device ID for the bluetooth chip used in the > AMPAK AP6212 WiFi+Bluetooth module. The AP6212 is used on several > BananaPi boards, e.g. M2-Ultra. > > The AP6212 is a combo module, where the WiFi chip is identified as > BCM43430A0 whereas the Bluetooth chip identifies itself as 4343A0. Note, > the missing '0' before the 'A0'. > > The AP6212 needs a firmware blob. Loading the provided firmware file > from the BananaPi vendor, the adapter name is printed as > 'BCM4343A0 26MHz AP6212_CL1-0061': > > ''' > hci0: Type: Primary Bus: UART > BD Address: 43:43:A0:12:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 > UP RUNNING > RX bytes:3076 acl:0 sco:0 events:278 errors:0 > TX bytes:39726 acl:0 sco:0 commands:279 errors:0 > Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH SNIFF > Link mode: SLAVE ACCEPT > Name: 'BCM4343A0 26MHz AP6212_CL1-0061' > Class: 0x000000 > Service Classes: Unspecified > Device Class: Miscellaneous, > HCI Version: 4.1 (0x7) Revision: 0xf2 > LMP Version: 4.1 (0x7) Subversion: 0x2122 > Manufacturer: Broadcom Corporation (15) > ''' > > Signed-off-by: Jörg Krause > --- > drivers/bluetooth/btbcm.c | 1 + > 1 file changed, 1 insertion(+) patch has been applied to bluetooth-next tree. Regards Marcel