Return-Path: Message-Id: <4d4ac18f570efc6371bc44c70836bdd3ddee3902.1514916630.git.lukas@wunner.de> In-Reply-To: References: From: Lukas Wunner Date: Tue, 2 Jan 2018 20:08:40 +0100 Subject: [PATCH v2 01/10] Bluetooth: Depend on rather than select GPIOLIB To: Marcel Holtmann , Johan Hedberg Cc: Mika Westerberg , Andy Shevchenko , Frederic Danis , Loic Poulain , Hans de Goede , Max Shavrick , Leif Liddy , Daniel Roschka , Ronald Tschalaer , "Peter Y. Chuang" , linux-bluetooth@vger.kernel.org, Linus Walleij List-ID: Commit 27378f4c1b92 ("Bluetooth: Avoid WARN splat due to missing GPIOLIB") amended Kconfig to select GPIOLIB if BT_HCIUART_NOKIA, BT_HCIUART_INTEL or BT_HCIUART_BCM is enabled since all three drivers require it to function. The diagnosis was correct but the treatment was not. As stated in Documentation/gpio/consumer.txt: Guidelines for GPIOs consumers ============================== Drivers that can't work without standard GPIO calls should have Kconfig entries that depend on GPIOLIB. ^^^^^^^^^ Fix it. Reported-by: Andy Shevchenko Cc: Linus Walleij Signed-off-by: Lukas Wunner --- drivers/bluetooth/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index d816ce9e23a7..07e55cd8f8c8 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -108,10 +108,10 @@ config BT_HCIUART_NOKIA tristate "UART Nokia H4+ protocol support" depends on BT_HCIUART depends on BT_HCIUART_SERDEV + depends on GPIOLIB depends on PM select BT_HCIUART_H4 select BT_BCM - select GPIOLIB help Nokia H4+ is serial protocol for communication between Bluetooth device and host. This protocol is required for Bluetooth devices @@ -170,9 +170,9 @@ config BT_HCIUART_3WIRE config BT_HCIUART_INTEL bool "Intel protocol support" depends on BT_HCIUART + depends on GPIOLIB select BT_HCIUART_H4 select BT_INTEL - select GPIOLIB help The Intel protocol support enables Bluetooth HCI over serial port interface for Intel Bluetooth controllers. @@ -184,9 +184,9 @@ config BT_HCIUART_BCM depends on BT_HCIUART depends on BT_HCIUART_SERDEV depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT) + depends on GPIOLIB select BT_HCIUART_H4 select BT_BCM - select GPIOLIB help The Broadcom protocol support enables Bluetooth HCI over serial port interface for Broadcom Bluetooth controllers. -- 2.15.1