Return-Path: From: Stefan Wahren To: Loic Poulain , =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Danis?= , Marcel Holtmann , Johan Hedberg , Eric Anholt , Rob Herring , Mark Rutland Cc: Lukas Wunner , Phil Elwell , Florian Fainelli , linux-bluetooth@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rpi-kernel@lists.infradead.org, devicetree@vger.kernel.org, Stefan Wahren Subject: [PATCH 4/4] ARM: bcm2385_defconfig: Enable BT support for BCM43438 Date: Sun, 25 Feb 2018 15:10:55 +0100 Message-Id: <1519567855-26105-5-git-send-email-stefan.wahren@i2se.com> In-Reply-To: <1519567855-26105-1-git-send-email-stefan.wahren@i2se.com> References: <1519567855-26105-1-git-send-email-stefan.wahren@i2se.com> List-ID: The Raspberry Pi Zero W has an onboard BT chip (BCM43438). So enable the necessary HCI UART driver (requires serial device bus). Signed-off-by: Stefan Wahren --- arch/arm/configs/bcm2835_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 43dab48..8682b15 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -49,6 +49,9 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y +CONFIG_BT=y +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_DEVTMPFS=y @@ -74,6 +77,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_TTY_PRINTK=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BCM2835=y -- 2.7.4