Return-Path: Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 11.4 \(3445.8.2\)) Subject: Re: [PATCH v5 1/7] dt-bindings: net: bluetooth: Add mediatek-bluetooth From: Marcel Holtmann In-Reply-To: Date: Sat, 14 Jul 2018 18:26:24 +0200 Cc: Rob Herring , Mark Rutland , Johan Hedberg , devicetree , "open list:BLUETOOTH DRIVERS" , linux-arm-kernel , linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org Message-Id: <7E55939D-7F8A-4832-9DD5-EFB3B19ACF0B@holtmann.org> References: To: sean.wang@mediatek.com Sender: linux-kernel-owner@vger.kernel.org List-ID: Hi Sean, > Add binding document for a SoC built-in device using MediaTek protocol. > Which could be found on MT7622 SoC or other similar MediaTek SoCs. > > Signed-off-by: Sean Wang > Reviewed-by: Rob Herring > --- > .../devicetree/bindings/net/mediatek-bluetooth.txt | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/mediatek-bluetooth.txt > > diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt > new file mode 100644 > index 0000000..1335429 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt > @@ -0,0 +1,35 @@ > +MediaTek SoC built-in Bluetooth Devices > +================================== > + > +This device is a serial attached device to BTIF device and thus it must be a > +child node of the serial node with BTIF. The dt-bindings details for BTIF > +device can be known via Documentation/devicetree/bindings/serial/8250.txt. > + > +Required properties: > + > +- compatible: Must be one of > + "mediatek,mt7622-bluetooth"": for MT7622 SoC this does not match with the example below. And one of, should be normally be a list. > +- clocks: Should be the clock specifiers corresponding to the entry in > + clock-names property. > +- clock-names: Should contain "ref" entries. > +- power-domains: Phandle to the power domain that the device is part of > + > +Example: > + > + btif: serial@1100c000 { > + compatible = "mediatek,mt7622-btif", > + "mediatek,mtk-btif"; > + reg = <0 0x1100c000 0 0x1000>; > + interrupts = ; > + clocks = <&pericfg CLK_PERI_BTIF_PD>; > + clock-names = "main"; > + reg-shift = <2>; > + reg-io-width = <4>; > + > + bluetooth { > + compatible = "mediatek,mt7622-bluetooth"; > + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; > + clocks = <&clk25m>; > + clock-names = "ref"; > + }; > + }; Regards Marcel