DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 363F32064E
From:   Szymon Janc <szymon.janc@codecoup.pl>
To:     el es <lsharkey602@gmail.com>
Cc:     linux-bluetooth@vger.kernel.org
Subject: Re: Connection to phone drops after a few seconds
Date:   Mon, 22 Oct 2018 14:55:38 +0200
Message-ID: <11670278.PMD1t7p2ff@ix>
Organization: CODECOUP
In-Reply-To: <CADC+9YC41FbhWCNF7Df3tKH7KAgxH0mXcQY5Xg3fAksJMz-9Rw@mail.gmail.com>
References: <CADC+9YC41FbhWCNF7Df3tKH7KAgxH0mXcQY5Xg3fAksJMz-9Rw@mail.gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Sender: linux-bluetooth-owner@vger.kernel.org
Precedence: bulk

Hi,

On Wednesday, 17 October 2018 21:26:57 CEST el es wrote:
> Hi,
> 
> I have been trying to connect to a phone with bluetooth to use dial-up
> networking.
> 
> Pairing is successful, but the connection drops after a few seconds.
> No mobile connection shows up on network-manager.
> 
> I have attached some output from syslog, and the main error seems to be:
> 
> Oct 16 17:37:47 luke-Satellite-L635 kernel: [  121.005940] Bluetooth:
> hci0: last event is not cmd complete (0x0f)
> Oct 16 17:37:47 luke-Satellite-L635 bluetoothd[809]:
> src/adapter.c:dev_disconnected() Device 00:19:2D:04:02:64
> disconnected, reason 2
> 
> The bluetooth adapter is recorded by lsusb as:
> Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd
> Bluetooth Dongle (HCI mode)
> 
> Is there anything else I should do?
> 
> I am not sure what other logs I should attach, but I will happily do so if
> told.
> 
> Thank you,

Link is disconnected after few seconds when no profiles are connected.

-- 
pozdrawiam
Szymon Janc