MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Wed, 27 Mar 2019 16:06:11 +0530
From:   Harish Bandi <c-hbandi@codeaurora.org>
To:     Matthias Kaehlcke <mka@chromium.org>
Cc:     marcel@holtmann.org, johan.hedberg@gmail.com,
        linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
        hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org,
        bgodavar@codeaurora.org, anubhavg@codeaurora.org,
        devicetree@vger.kernel.org, mark.rutland@arm.com,
        robh+dt@kernel.org
Subject: Re: [PATCH v5 1/2] Bluetooth: hci_qca: Added support for WCN3998
In-Reply-To: <20190326234403.GZ112750@google.com>
References: <1553600756-8264-1-git-send-email-c-hbandi@codeaurora.org>
 <1553600756-8264-2-git-send-email-c-hbandi@codeaurora.org>
 <20190326234403.GZ112750@google.com>
Message-ID: <0bc9e4191ecd2c33bf852bef9ad8ecf2@codeaurora.org>
User-Agent: Roundcube Webmail/1.2.5
Sender: linux-bluetooth-owner@vger.kernel.org
Precedence: bulk

Hi Matthias,

On 2019-03-27 05:14, Matthias Kaehlcke wrote:
> On Tue, Mar 26, 2019 at 05:15:55PM +0530, Harish Bandi wrote:
>> Added new compatible for WCN3998 and corresponding voltage
>> and current values to WCN3998 compatible.
>> Changed driver code to support WCN3998
>> 
>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>> ---
>> Changes in V5:
>> - changed is_qca_soc_type_wcn399x_family to
>> - qca_is_wcn399x helper function
>> - moved the qca_is_wcn399x function to btqca.c
>> ---
>>  drivers/bluetooth/btqca.c   | 13 +++++++++++--
>>  drivers/bluetooth/btqca.h   |  8 +++++++-
>>  drivers/bluetooth/hci_qca.c | 40 
>> ++++++++++++++++++++++++++--------------
>>  3 files changed, 44 insertions(+), 17 deletions(-)
>> 
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index 6122685..383e99f 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>> 
>>  	/* Download rampatch file */
>>  	config.type = TLV_TYPE_PATCH;
>> -	if (soc_type == QCA_WCN3990) {
>> +	if (qca_is_wcn399x(soc_type)) {
>>  		/* Firmware files to download are based on ROM version.
>>  		 * ROM version is derived from last two bytes of soc_ver.
>>  		 */
>> @@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>> 
>>  	/* Download NVM configuration */
>>  	config.type = TLV_TYPE_NVM;
>> -	if (soc_type == QCA_WCN3990)
>> +	if (qca_is_wcn399x(soc_type))
>>  		snprintf(config.fwname, sizeof(config.fwname),
>>  			 "qca/crnv%02x.bin", rom_ver);
>>  	else
>> @@ -410,6 +410,15 @@ int qca_set_bdaddr(struct hci_dev *hdev, const 
>> bdaddr_t *bdaddr)
>>  }
>>  EXPORT_SYMBOL_GPL(qca_set_bdaddr);
>> 
>> +bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
>> +{
>> +	if ((soc_type == QCA_WCN3990) || (soc_type == QCA_WCN3998))
>> +		return true;
>> +
>> +	return false;
>> +}
>> +EXPORT_SYMBOL_GPL(qca_is_wcn399x);
>> +
>>  MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
>>  MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver 
>> " VERSION);
>>  MODULE_VERSION(VERSION);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index 6fdc25d..aca7b0d 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -132,7 +132,8 @@ enum qca_btsoc_type {
>>  	QCA_INVALID = -1,
>>  	QCA_AR3002,
>>  	QCA_ROME,
>> -	QCA_WCN3990
>> +	QCA_WCN3990,
>> +	QCA_WCN3998,
>>  };
>> 
>>  #if IS_ENABLED(CONFIG_BT_QCA)
>> @@ -142,6 +143,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>>  		   enum qca_btsoc_type soc_type, u32 soc_ver);
>>  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
>>  int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> +bool qca_is_wcn399x(enum qca_btsoc_type soc_type);
>>  #else
>> 
>>  static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const 
>> bdaddr_t *bdaddr)
>> @@ -165,4 +167,8 @@ static inline int qca_set_bdaddr(struct hci_dev 
>> *hdev, const bdaddr_t *bdaddr)
>>  	return -EOPNOTSUPP;
>>  }
>> 
>> +static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
>> +{
>> +	return -EOPNOTSUPP;
> 
> This function returns a bool, hence returning an error code is not
> meaningful here. Just return false.

[Harish] - ok will correct it new patch.
> 
>> +}
>>  #endif
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 4ea995d..4af580a 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)
>>  	if (hu->serdev) {
>> 
>>  		qcadev = serdev_device_get_drvdata(hu->serdev);
>> -		if (qcadev->btsoc_type != QCA_WCN3990) {
>> +		if (!qca_is_wcn399x(qcadev->btsoc_type)) {
>>  			gpiod_set_value_cansleep(qcadev->bt_en, 1);
>>  		} else {
>>  			hu->init_speed = qcadev->init_speed;
>> @@ -627,7 +627,7 @@ static int qca_close(struct hci_uart *hu)
>> 
>>  	if (hu->serdev) {
>>  		qcadev = serdev_device_get_drvdata(hu->serdev);
>> -		if (qcadev->btsoc_type == QCA_WCN3990)
>> +		if (qca_is_wcn399x(qcadev->btsoc_type))
>>  			qca_power_shutdown(hu);
>>  		else
>>  			gpiod_set_value_cansleep(qcadev->bt_en, 0);
>> @@ -1008,7 +1008,7 @@ static int qca_set_baudrate(struct hci_dev 
>> *hdev, uint8_t baudrate)
>>  		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
>> 
>>  	/* Give the controller time to process the request */
>> -	if (qca_soc_type(hu) == QCA_WCN3990)
>> +	if (qca_is_wcn399x(qca_soc_type(hu)))
>>  		msleep(10);
>>  	else
>>  		msleep(300);
>> @@ -1084,7 +1084,7 @@ static unsigned int qca_get_speed(struct 
>> hci_uart *hu,
>> 
>>  static int qca_check_speeds(struct hci_uart *hu)
>>  {
>> -	if (qca_soc_type(hu) == QCA_WCN3990) {
>> +	if (qca_is_wcn399x(qca_soc_type(hu))) {
>>  		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
>>  		    !qca_get_speed(hu, QCA_OPER_SPEED))
>>  			return -EINVAL;
>> @@ -1116,7 +1116,7 @@ static int qca_set_speed(struct hci_uart *hu, 
>> enum qca_speed_type speed_type)
>>  		/* Disable flow control for wcn3990 to deassert RTS while
>>  		 * changing the baudrate of chip and host.
>>  		 */
>> -		if (soc_type == QCA_WCN3990)
>> +		if (qca_is_wcn399x(soc_type))
>>  			hci_uart_set_flow_control(hu, true);
>> 
>>  		qca_baudrate = qca_get_baudrate_value(speed);
>> @@ -1128,7 +1128,7 @@ static int qca_set_speed(struct hci_uart *hu, 
>> enum qca_speed_type speed_type)
>>  		host_set_baudrate(hu, speed);
>> 
>>  error:
>> -		if (soc_type == QCA_WCN3990)
>> +		if (qca_is_wcn399x(soc_type))
>>  			hci_uart_set_flow_control(hu, false);
>>  	}
>> 
>> @@ -1201,7 +1201,7 @@ static int qca_setup(struct hci_uart *hu)
>>  	/* Patch downloading has to be done without IBS mode */
>>  	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
>> 
>> -	if (soc_type == QCA_WCN3990) {
>> +	if (qca_is_wcn399x(soc_type)) {
>>  		bt_dev_info(hdev, "setting up wcn3990");
>> 
>>  		/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
>> @@ -1232,7 +1232,7 @@ static int qca_setup(struct hci_uart *hu)
>>  		qca_baudrate = qca_get_baudrate_value(speed);
>>  	}
>> 
>> -	if (soc_type != QCA_WCN3990) {
>> +	if (!qca_is_wcn399x(soc_type)) {
>>  		/* Get QCA version information */
>>  		ret = qca_read_soc_version(hdev, &soc_ver);
>>  		if (ret)
>> @@ -1257,7 +1257,7 @@ static int qca_setup(struct hci_uart *hu)
>>  	}
>> 
>>  	/* Setup bdaddr */
>> -	if (soc_type == QCA_WCN3990)
>> +	if (qca_is_wcn399x(soc_type))
>>  		hu->hdev->set_bdaddr = qca_set_bdaddr;
>>  	else
>>  		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>> @@ -1280,7 +1280,7 @@ static int qca_setup(struct hci_uart *hu)
>>  	.dequeue	= qca_dequeue,
>>  };
>> 
>> -static const struct qca_vreg_data qca_soc_data = {
>> +static const struct qca_vreg_data qca_soc_data_wcn3990 = {
>>  	.soc_type = QCA_WCN3990,
>>  	.vregs = (struct qca_vreg []) {
>>  		{ "vddio",   1800000, 1900000,  15000  },
>> @@ -1291,6 +1291,17 @@ static int qca_setup(struct hci_uart *hu)
>>  	.num_vregs = 4,
>>  };
>> 
>> +static const struct qca_vreg_data qca_soc_data_wcn3998 = {
>> +	.soc_type = QCA_WCN3998,
>> +	.vregs = (struct qca_vreg []) {
>> +		{ "vddio",   1800000, 1900000,  10000  },
>> +		{ "vddxo",   1800000, 1900000,  80000  },
>> +		{ "vddrf",   1300000, 1352000,  300000 },
>> +		{ "vddch0",  3300000, 3300000,  450000 },
>> +	},
>> +	.num_vregs = 4,
>> +};
>> +
>>  static void qca_power_shutdown(struct hci_uart *hu)
>>  {
>>  	struct qca_data *qca = hu->priv;
>> @@ -1424,8 +1435,8 @@ static int qca_serdev_probe(struct serdev_device 
>> *serdev)
>>  	qcadev->serdev_hu.serdev = serdev;
>>  	data = of_device_get_match_data(&serdev->dev);
>>  	serdev_device_set_drvdata(serdev, qcadev);
>> -	if (data && data->soc_type == QCA_WCN3990) {
>> -		qcadev->btsoc_type = QCA_WCN3990;
>> +	if (data && qca_is_wcn399x(data->soc_type)) {
>> +		qcadev->btsoc_type = data->soc_type;
>>  		qcadev->bt_power = devm_kzalloc(&serdev->dev,
>>  						sizeof(struct qca_power),
>>  						GFP_KERNEL);
>> @@ -1489,7 +1500,7 @@ static void qca_serdev_remove(struct 
>> serdev_device *serdev)
>>  {
>>  	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
>> 
>> -	if (qcadev->btsoc_type == QCA_WCN3990)
>> +	if (qca_is_wcn399x(qcadev->btsoc_type))
>>  		qca_power_shutdown(&qcadev->serdev_hu);
>>  	else
>>  		clk_disable_unprepare(qcadev->susclk);
>> @@ -1499,7 +1510,8 @@ static void qca_serdev_remove(struct 
>> serdev_device *serdev)
>> 
>>  static const struct of_device_id qca_bluetooth_of_match[] = {
>>  	{ .compatible = "qcom,qca6174-bt" },
>> -	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
>> +	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
>> +	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>>  	{ /* sentinel */ }
>>  };
>>  MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
> 
> Besides the return value in the qca_is_wcn399x() stub:
> 
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[Harish] - Thanks for reviewing

Thanks,
Harish