Received-SPF: pass (google.com: best guess record for domain of linux-bluetooth-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Content-Type: text/plain;
        charset=us-ascii
Mime-Version: 1.0 (Mac OS X Mail 13.0 \(3608.40.2.2.4\))
Subject: Re: [PATCH v2] Bluetooth: btusb: Add support for 04ca:3021 QCA_ROME
 device
From:   Marcel Holtmann <marcel@holtmann.org>
In-Reply-To: <20200106060744.5476-1-rjliao@codeaurora.org>
Date:   Mon, 6 Jan 2020 14:36:39 +0100
Cc:     Johan Hedberg <johan.hedberg@gmail.com>,
        linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org
Content-Transfer-Encoding: 8BIT
Message-Id: <0E6CEC41-1759-4C13-86CF-9067B0F272E4@holtmann.org>
References: <20191219071857.18532-1-rjliao@codeaurora.org>
 <20200106060744.5476-1-rjliao@codeaurora.org>
To:     Rocky Liao <rjliao@codeaurora.org>
Sender: linux-bluetooth-owner@vger.kernel.org
Precedence: bulk

Hi Rocky,

> USB "VendorID:04ca ProductID:3021" is a new QCA ROME USB
> Bluetooth device, this patch will support firmware downloading for it.
> 
> T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
> D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=04ca ProdID=3021 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> 
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
> 
> Changes in v2: Added the /sys/kernel/debug/usb/devices output to the commit message
> 
> drivers/bluetooth/btusb.c | 1 +
> 1 file changed, 1 insertion(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel