Received-SPF: pass (google.com: domain of linux-bluetooth-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <CAEwN+MAuLad-9jh0fb7-ZDN6kSGORf7Rd1HffGV4VpThkP=Rng@mail.gmail.com>
 <105cf340892caf0014eb154335784d8c46b8eb6e.camel@intel.com>
In-Reply-To: <105cf340892caf0014eb154335784d8c46b8eb6e.camel@intel.com>
From:   Raul Piper <raulpblooper@gmail.com>
Date:   Fri, 27 Aug 2021 13:20:16 +0530
Message-ID: <CAEwN+MDpQ=+XgNjTfhHn8n9mbbqSn5iVLYm1kMRVcUDMY4h9fg@mail.gmail.com>
Subject: Re: Which tool to use for Mesh Testing
To:     "Stotland, Inga" <inga.stotland@intel.com>
Cc:     "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

OK , Thanks Inga,
I will not use meshctl as of now based on this information.
So currently there is no  PB-GATT support in mesh-cfg client?

Regards,
R

On Fri, Aug 27, 2021 at 12:03 PM Stotland, Inga <inga.stotland@intel.com> wrote:
>
> Hi Raul,
>
> On Tue, 2021-08-24 at 23:40 +0530, Raul Piper wrote:
> > Hello ,
> > Which tool I can use for Ble Mesh testing, meshctl or gatt-mesh or
> > any
> > other ? I followed few mails and came to know meshctl is not fit for
> > use. Please advice.
> > I want to test both PB-ADV and PB-GATT.
> > Thanks in advance !
> > Regards,
> > Rp
>
> Please use tools/mesh-cfgclient to test with PB-ADV. You can use it to
> provision and configure mesh nodes.
> There is also a python-based tool: test/test-mesh that implements
> on/off model and could be provisioned as a mesh node using mesh-
> cfgclient.
>
> As for PB-GATT, meshctl would be the tool for that, BUT it hasn't been
> updated in a long while, and I don't expect it to be functional.
>
> Regards,
> Inga