Received-SPF: pass (google.com: domain of linux-bluetooth-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <0dffeb79-3182-fab1-e25a-aab4107beb6e@infineon.com>
Date:   Thu, 19 May 2022 16:04:33 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101
 Thunderbird/91.9.0
Subject: Re: [PATCH 1/2] dt-bindings: net: broadcom-bluetooth: Add property
 for autobaud mode
Content-Language: en-US
From:   Hakan Jansson <hakan.jansson@infineon.com>
To:     Linus Walleij <linus.walleij@linaro.org>
CC:     "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
        <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        Marcel Holtmann <marcel@holtmann.org>,
        Johan Hedberg <johan.hedberg@gmail.com>,
        "Luiz Augusto von Dentz" <luiz.dentz@gmail.com>,
        <linux-bluetooth@vger.kernel.org>
References: <cover.1651647576.git.hakan.jansson@infineon.com>
 <64b59ca66cc22e6433a044e7bba2b3e97c810dc2.1651647576.git.hakan.jansson@infineon.com>
 <CACRpkdY3xPcyNcJfdGbSP5rdcUV6hr87yJNDVDGZdRCfN+MqLA@mail.gmail.com>
 <1e8cfbc6-8452-0e87-9713-536d235e5b51@infineon.com>
 <CACRpkda4ByrS8RGAunno_S59+Y2yado4eObzwsVkM2Q=n-B+CQ@mail.gmail.com>
 <d35fff90-ded7-2b1a-0e1a-f2db14cc4d07@infineon.com>
In-Reply-To: <d35fff90-ded7-2b1a-0e1a-f2db14cc4d07@infineon.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi Linus,

I checked the state of this patch on Devicetree Bindings Patchwork and 
it's marked "Changes Requested". I'd be happy to revise the patch but 
it's not clear to me what changes are requested. Could you please help 
guide me how to proceed?

Sorry if I'm missing something obvious here.

Thanks,
Håkan

On 5/5/2022 6:16 PM, Hakan Jansson wrote:
>
>
> On 5/5/2022 4:13 PM, Linus Walleij wrote:
>> I suppose a general flag could be useful but to be honest I don't know
>>> if any other devices besides the ones using the Broadcom driver has any
>>> use for it. You would probably also still want to be able to use
>>> current-speed to set the link speed and end up using both
>>> current-speed=x and current-speed-auto at the same time, which might
>>> look a little confusing?
>> I do not think it is more confusing than being able to use
>> current-speed and brcm,uses-autobaud-mode at the same time.
>>
>>> Please let me know if you'd still prefer "current-speed-auto" over
>>> "brcm,uses-autobaud-mode" and I'll revise the patch and rename it!
>> It actually depends a bit.
>>
>> This:
>>
>>>>> +      The controller should be started in autobaud mode by asserting
>>>>> +      BT_UART_CTS_N (i.e. host RTS) during startup. Only HCI 
>>>>> commands supported
>>>>> +      in autobaud mode should be used until patch FW has been 
>>>>> loaded.
>> sounds a bit vague?
>
> Yes, perhaps. I was thinking the details could be helpful but I can 
> see how they might be perceived as vague and confusing. Maybe it would 
> be better to just leave it at "The controller should be started in 
> autobaud mode"?
>
>>
>> Does it mean that CTS is asserted, then you send a bit (CTS then goes 
>> low)
>> and then CTS is asserted again when the device is ready to receieve more
>> data? i.e is this some kind of one-bit mode, because it doesn't sound 
>> like
>> it is using CTS as it was used in legacy modems.
>
> CTS and RTS are actually used in the normal way during communication. 
> The host will assert its RTS to indicate being ready to receive data 
> from the controller. This flag just controls whether this happens 
> before or after the controller is powered on. The controller will 
> check the initial state of its BT_UART_CTS_N pin (connected to host's 
> RTS) when starting up. It will enter autobaud mode if the signal is 
> already asserted.
>
>> Some more explanation of this mode is needed so we can understand if
>> this is something generic or a BRCM-only thing.
>>
>> Yours,
>> Linus Walleij
>
> Thanks,
> Håkan