Received-SPF: pass (google.com: domain of linux-bluetooth-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Joseph Hwang <josephsih@chromium.org>
To:     linux-bluetooth@vger.kernel.org, marcel@holtmann.org,
        luiz.dentz@gmail.com, pali@kernel.org
Cc:     chromeos-bluetooth-upstreaming@chromium.org, josephsih@google.com,
        Joseph Hwang <josephsih@chromium.org>
Subject: [BlueZ PATCH v5 1/8] doc: Introduce the quality report command and event
Date:   Wed, 25 May 2022 18:50:08 +0800
Message-Id: <20220525105015.2315987-1-josephsih@chromium.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add the MGMT quality report command and event in doc/mgmt-api.txt.

---

Changes in v5:
- Use Quality_Report instead of Action in mgmt-api.txt.
- Modify the description of Set Quality Report Command.

Changes in v4:
- Use "Quality Report Event" without the prefix "Bluetooth" word.
- Combine both MGMT quality report command and event changes in a
  single patch.

Changes in v3:
- Swap AOSP Bluetooth Quality Report Event and Intel Telemetry Event.
- Add 5 new patches (5/9 - 9/9) to enable the quality report
  feature via MGMT_OP_SET_QUALITY_REPORT instead of through the
  experimental features.

Changes in v2:
- This is a new patch for adding the event in doc/mgmt-api.txt

 doc/mgmt-api.txt | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index ebe56afa4..a429f0ef3 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -332,6 +332,7 @@ Read Controller Information Command
 		15	Static Address
 		16	PHY Configuration
 		17	Wideband Speech
+		18	Quality Report
 
 	This command generates a Command Complete event on success or
 	a Command Status event on failure.
@@ -2924,6 +2925,7 @@ Read Extended Controller Information Command
 		15	Static Address
 		16	PHY Configuration
 		17	Wideband Speech
+		18	Quality Report
 
 	The EIR_Data field contains information about class of device,
 	local name and other values. Not all of them might be present. For
@@ -3858,6 +3860,45 @@ Add Advertisement Patterns Monitor With RSSI Threshold Command
 				Invalid Parameters
 
 
+Set Quality Report Command
+==========================
+
+	Command Code:		0x0057
+	Controller Index:	<controller id>
+	Command Parameters:	Quality_Report (1 Octet)
+	Return Parameters:	Current_Settings (4 Octets)
+
+	This command is used to enable and disable the controller's quality
+	report feature. The allowed values for the Quality_Report command
+	parameter are 0x00 and 0x01. All other values will return Invalid
+	Parameters.
+
+	The value 0x00 disables the Quality Report, and the value 0x01
+	enables the Quality Report feature.
+
+	This command is only available for the controllers that support
+	either AOSP Bluetooth quality report or Intel telemetry event.
+	It is supported if the supported_settings indicate support for it.
+
+	This command requires to use a valid controller index. Otherwise,
+	an Invalid Index status will be returned.
+
+	The command is sent to the controller to enable/disable the quality
+	report feature, and generates a Command Complete event on success.
+	If the controller failed to execute the action, a Failed status will
+	be returned.
+
+	The quality report state is maintained by the kernel over the adapter
+	power cycle. When the adapter is powered off, the quality report
+	feature is disabled by the kernel. When the adapter is powered on, it
+	is enabled again by the kernel if it was enabled before.
+
+	Possible errors:	Failed
+				Invalid Index
+				Invalid Parameters
+				Not Supported
+
+
 Command Complete Event
 ======================
 
@@ -4978,3 +5019,22 @@ Advertisement Monitor Device Lost Event
 		2	LE Random
 
 	This event will be sent to all management sockets.
+
+
+Quality Report Event
+====================
+
+	Event code:		0x0031
+	Controller Index:	<controller_id>
+	Event Parameters:	Quality_Spec (1 Octet)
+				Report_Len (2 Octets)
+				Report (0-65535 Octets)
+
+	This event carries the Bluetooth quality report sent by the
+	controller.
+
+	Possible values for the Quality_Spec parameter:
+		0	AOSP Bluetooth Quality Report Event
+		1	Intel Telemetry Event
+
+	This event will be sent to all management sockets.
-- 
2.36.1.124.g0e6072fb45-goog