Received-SPF: pass (google.com: domain of linux-bluetooth-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   <sean.wang@mediatek.com>
To:     <marcel@holtmann.org>, <johan.hedberg@gmail.com>,
        <luiz.dentz@gmail.com>
CC:     <sean.wang@mediatek.com>, <Soul.Huang@mediatek.com>,
        <YN.Chen@mediatek.com>, <Leon.Yen@mediatek.com>,
        <Eric-SY.Chang@mediatek.com>, <Deren.Wu@mediatek.com>,
        <km.lin@mediatek.com>, <robin.chiu@mediatek.com>,
        <Eddie.Chen@mediatek.com>, <ch.yeh@mediatek.com>,
        <posh.sun@mediatek.com>, <ted.huang@mediatek.com>,
        <Stella.Chang@mediatek.com>, <Tom.Chou@mediatek.com>,
        <steve.lee@mediatek.com>, <jsiuda@google.com>,
        <frankgor@google.com>, <abhishekpandit@google.com>,
        <michaelfsun@google.com>, <abhishekpandit@chromium.org>,
        <mcchou@chromium.org>, <shawnku@google.com>,
        <linux-bluetooth@vger.kernel.org>,
        <linux-mediatek@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 1/3] Bluetooth: btusb: mediatek: use readx_poll_timeout instead of open coding
Date:   Fri, 30 Sep 2022 08:23:47 +0800
Message-ID: <ab8958da839ecadc0ebff9f0a221ef49a2e5a4cc.1664497281.git.objelf@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

From: Sean Wang <sean.wang@mediatek.com>

Use readx_poll_timeout instead of open coding to poll the hardware reset
status until it is done.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
The patch is built and tested on the top of the patches
[v6,1/3] Bluetooth: Add support for hci devcoredump
[v6,2/3] Bluetooth: btusb: Add btusb devcoredump support
[v6,3/3] Bluetooth: btintel: Add Intel devcoredump support
which are contributed from Manish Mandlik

v2: use 20ms as the unit to poll according to the requirement of
    readx_poll_timeout
---
 drivers/bluetooth/btusb.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4eb79e88f1d9..9ef0dc648573 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2361,8 +2361,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
 #define MTK_EP_RST_OPT		0x74011890
 #define MTK_EP_RST_IN_OUT_OPT	0x00010001
 #define MTK_BT_RST_DONE		0x00000100
-#define MTK_BT_RESET_WAIT_MS	100
-#define MTK_BT_RESET_NUM_TRIES	10
 
 static void btusb_mtk_wmt_recv(struct urb *urb)
 {
@@ -2733,6 +2731,16 @@ static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
 	return btusb_mtk_reg_read(data, reg, id);
 }
 
+static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 val = 0;
+
+	btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
+
+	return val;
+}
+
 static int btusb_mtk_setup(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2922,7 +2930,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 val;
-	int err, retry = 0;
+	int err;
 
 	/* It's MediaTek specific bluetooth reset mechanism via USB */
 	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
@@ -2953,18 +2961,14 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
 	btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
 
-	/* Poll the register until reset is completed */
-	do {
-		btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
-		if (val & MTK_BT_RST_DONE) {
-			bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
-			break;
-		}
+	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+				 val & MTK_BT_RST_DONE,
+				 20000, 1000000);
+	if (err < 0)
+		bt_dev_err(hdev, "Reset timeout");
 
-		bt_dev_dbg(hdev, "Polling Bluetooth Reset CR");
-		retry++;
-		msleep(MTK_BT_RESET_WAIT_MS);
-	} while (retry < MTK_BT_RESET_NUM_TRIES);
+	if (val & MTK_BT_RST_DONE)
+		bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
 
 	btusb_mtk_id_get(data, 0x70010200, &val);
 	if (!val)
-- 
2.25.1