Received-SPF: pass (google.com: domain of linux-bluetooth-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   <sean.wang@mediatek.com>
To:     <marcel@holtmann.org>, <johan.hedberg@gmail.com>,
        <luiz.dentz@gmail.com>
CC:     <sean.wang@mediatek.com>, <chris.lu@mediatek.com>,
        <Soul.Huang@mediatek.com>, <Leon.Yen@mediatek.com>,
        <Deren.Wu@mediatek.com>, <km.lin@mediatek.com>,
        <robin.chiu@mediatek.com>, <Eddie.Chen@mediatek.com>,
        <ch.yeh@mediatek.com>, <jenhao.yang@mediatek.com>,
        <Stella.Chang@mediatek.com>, <Tom.Chou@mediatek.com>,
        <steve.lee@mediatek.com>, <jsiuda@google.com>,
        <frankgor@google.com>, <abhishekpandit@google.com>,
        <michaelfsun@google.com>, <mmandlik@google.com>,
        <abhishekpandit@chromium.org>, <mcchou@chromium.org>,
        <shawnku@google.com>, <linux-bluetooth@vger.kernel.org>,
        <linux-mediatek@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v8 1/3] Bluetooth: btusb: mediatek: readx_poll_timeout replaces open coding
Date:   Thu, 29 Jun 2023 06:54:55 +0800
Message-ID: <80efe66b16d933e3457bd38b1a60a5d51d4dee9e.1687991820.git.objelf@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

From: Sean Wang <sean.wang@mediatek.com>

Use readx_poll_timeout instead of open coding to poll the hardware reset
status until it is done.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: use 20ms as the unit to poll according to the requirement of
    readx_poll_timeout
v3: refine btusb_mtk_reset_done and drop the necessary error check
    in btusb_mtk_cmd_timeout
v4, v5, v6 and v7: rebase onto the latest codebase
v8: fixed GitLint failure
---
 drivers/bluetooth/btusb.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index cb58691b63ca..4c38d1c0f059 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2657,8 +2657,6 @@ static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb)
 #define MTK_EP_RST_OPT		0x74011890
 #define MTK_EP_RST_IN_OUT_OPT	0x00010001
 #define MTK_BT_RST_DONE		0x00000100
-#define MTK_BT_RESET_WAIT_MS	100
-#define MTK_BT_RESET_NUM_TRIES	10
 #define MTK_BT_RESET_REG_CONNV3	0x70028610
 #define MTK_BT_READ_DEV_ID	0x70010200
 
@@ -3032,6 +3030,16 @@ static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
 	return btusb_mtk_reg_read(data, reg, id);
 }
 
+static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 val = 0;
+
+	btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
+
+	return val & MTK_BT_RST_DONE;
+}
+
 static int btusb_mtk_setup(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3232,7 +3240,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 val;
-	int err, retry = 0;
+	int err;
 	struct btmediatek_data *mediatek;
 
 	/* It's MediaTek specific bluetooth reset mechanism via USB */
@@ -3284,18 +3292,10 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
 	}
 
-	/* Poll the register until reset is completed */
-	do {
-		btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
-		if (val & MTK_BT_RST_DONE) {
-			bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
-			break;
-		}
-
-		bt_dev_dbg(hdev, "Polling Bluetooth Reset CR");
-		retry++;
-		msleep(MTK_BT_RESET_WAIT_MS);
-	} while (retry < MTK_BT_RESET_NUM_TRIES);
+	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+				 val & MTK_BT_RST_DONE, 20000, 1000000);
+	if (err < 0)
+		bt_dev_err(hdev, "Reset timeout");
 
 	btusb_mtk_id_get(data, 0x70010200, &val);
 	if (!val)
-- 
2.25.1