Received-SPF: pass (google.com: domain of linux-bluetooth+bounces-756-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: <max.chou@realtek.com>
To: <marcel@holtmann.org>
CC: <johan.hedberg@gmail.com>, <luiz.dentz@gmail.com>,
        <linux-bluetooth@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <alex_lu@realsil.com.cn>, <hildawu@realtek.com>,
        <karenhsu@realtek.com>, <max.chou@realtek.com>
Subject: [PATCH v2] Bluetooth: btrtl: Add the support for RTL8852BT/RTL8852BE-VT
Date: Tue, 26 Dec 2023 19:45:17 +0800
Message-ID: <20231226114518.5395-1-max.chou@realtek.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

From: Max Chou <max.chou@realtek.com>

Add the support for RTL8852BT/RTL8852BE-VT BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  8 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=8520 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Max Chou <max.chou@realtek.com>
---
changes in v2:
 - Add the USB ID for RTL8852BT/RTL8852BE-VT
---
 drivers/bluetooth/btrtl.c | 14 ++++++++++++++
 drivers/bluetooth/btusb.c |  3 +++
 2 files changed, 17 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 277d039ecbb4..cc50de69e8dc 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -69,6 +69,7 @@ enum btrtl_chip_id {
 	CHIP_ID_8852B = 20,
 	CHIP_ID_8852C = 25,
 	CHIP_ID_8851B = 36,
+	CHIP_ID_8852BT = 47,
 };
 
 struct id_table {
@@ -307,6 +308,15 @@ static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8851bu_fw",
 	  .cfg_name = "rtl_bt/rtl8851bu_config",
 	  .hw_info  = "rtl8851bu" },
+
+	/* 8852BT/8852BE-VT */
+	{ IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8852btu_fw",
+	  .cfg_name = "rtl_bt/rtl8852btu_config",
+	  .hw_info  = "rtl8852btu" },
 	};
 
 static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
@@ -645,6 +655,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8852A, 20 },	/* 8852B */
 		{ RTL_ROM_LMP_8852A, 25 },	/* 8852C */
 		{ RTL_ROM_LMP_8851B, 36 },	/* 8851B */
+		{ RTL_ROM_LMP_8852A, 47 },	/* 8852BT */
 	};
 
 	if (btrtl_dev->fw_len <= 8)
@@ -1275,6 +1286,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 	case CHIP_ID_8852B:
 	case CHIP_ID_8852C:
 	case CHIP_ID_8851B:
+	case CHIP_ID_8852BT:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 
@@ -1505,6 +1517,8 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852btu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7835170b1d66..a0a317bac095 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -553,6 +553,9 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Realtek 8852BT/8852BE-VT Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	/* Realtek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
 	  .driver_info = BTUSB_REALTEK },
-- 
2.34.1