Received-SPF: pass (google.com: domain of linux-bluetooth+bounces-844-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Yuxuan Hu <20373622@buaa.edu.cn>
To: marcel@holtmann.org,
	johan.hedberg@gmail.com,
	luiz.dentz@gmail.com
Cc: linux-bluetooth@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	baijiaju1990@gmail.com,
	sy2239101@buaa.edu.cn,
	20373622@buaa.edu.cn,
	pmenzel@molgen.mpg.de
Subject: [PATCH V3] Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Date: Wed,  3 Jan 2024 17:10:43 +0800
Message-Id: <20240103091043.3379363-1-20373622@buaa.edu.cn>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:

1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.

2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.

3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.

To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.

Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
---
V1 -> V2: Check earlier on rfcomm_process_rx
V2 -> V3: Fixed formatting errors in the commit

 net/bluetooth/rfcomm/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 053ef8f25fae..1d34d8497033 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1941,7 +1941,7 @@ static struct rfcomm_session *rfcomm_process_rx(struct rfcomm_session *s)
 	/* Get data directly from socket receive queue without copying it. */
 	while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
 		skb_orphan(skb);
-		if (!skb_linearize(skb)) {
+		if (!skb_linearize(skb) && sk->sk_state != BT_CLOSED) {
 			s = rfcomm_recv_frame(s, skb);
 			if (!s)
 				break;
-- 
2.25.1