Use the config loop helper in bluetooth pcmcia drivers.
CC: Marcel Holtmann <[email protected]>
CC: [email protected]
Signed-off-by: Dominik Brodowski <[email protected]>
---
drivers/bluetooth/bt3c_cs.c | 117 ++++++++++++++++-------------------------
drivers/bluetooth/btuart_cs.c | 118 ++++++++++++++++-------------------------
drivers/bluetooth/dtl1_cs.c | 62 +++++-----------------
3 files changed, 103 insertions(+), 194 deletions(-)
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 593b7c5..97b4e22 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -678,93 +678,66 @@ static void bt3c_detach(struct pcmcia_device *link)
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ unsigned long try = (unsigned long) priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int bt3c_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
bt3c_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
-
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ int i;
+ unsigned long try;
+
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if(!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if(!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
+ goto found_port;
-found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 68d1d25..6fca5b9 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -607,94 +607,66 @@ static void btuart_detach(struct pcmcia_device *link)
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ unsigned long try = (unsigned long) priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int btuart_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
-
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ int i;
+ unsigned long try;
+
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if(!pcmcia_loop_config(link, btuart_check_config, (void *) try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
- && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if(!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
+ goto found_port;
-found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index dae45cd..e30a633 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -590,66 +590,30 @@ static void dtl1_detach(struct pcmcia_device *link)
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int dtl1_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
static int dtl1_config(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
/* Look for a generic full-sized window */
link->io.NumPorts1 = 8;
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len; /*yo */
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
+ if (!pcmcia_loop_config(link, dtl1_confcheck, NULL))
goto failed;
- }
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
--
1.5.4.3
Hi Marcel,
On Mon, Aug 18, 2008 at 09:57:11PM +0200, Marcel Holtmann wrote:
> > CC: Marcel Holtmann <[email protected]>
> > CC: [email protected]
> > Signed-off-by: Dominik Brodowski <[email protected]>
>
> I know that the Bluetooth PCMCIA drivers are not the best examples for
> coding style, but please double check your whitespaces/tabs. We don't
> wanna make it worse.
actually, I'm pondering making a CodingStyle cleanup of the whole PCMCIA
subsystem for drivers/pcmcia/ is so unbelievable un-CodingStyle... but:
>
> > - return get_tuple(handle, tuple, parse);
> > + unsigned long try = (unsigned long) priv_data;
> > +
> > + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
> > + p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
something went badly wrong here, will fix it up (probably in a follow-up
patch).
Thanks,
Dominik
Hi Dominik,
> Use the config loop helper in bluetooth pcmcia drivers.
>
> CC: Marcel Holtmann <[email protected]>
> CC: [email protected]
> Signed-off-by: Dominik Brodowski <[email protected]>
I know that the Bluetooth PCMCIA drivers are not the best examples for
coding style, but please double check your whitespaces/tabs. We don't
wanna make it worse.
> - return get_tuple(handle, tuple, parse);
> + unsigned long try = (unsigned long) priv_data;
> +
> + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
> + p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
This is an obvious case where something is wrong.
Regards
Marcel