Hi
I've been following major releases with ubuntu. On the last release, I
found that the logitech mx5000 bluetooth keyboard I use has started
repeating keys. It's especially bad after it's been idle and also if I
start typing quickly. I'll disable key repeats in the keyboard control
panel but that's not entirely satisfactory either.
This wasn't happening before 8.10. I'm running 2.6.27-9-generic and bluez 4.12.
The dump when I typed a quick "hello" (it came out "heeeeeeeello")
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x02 interval 802
Mode: Sniff
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 45 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 45 mode 0x02 interval 120
Mode: Sniff
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 0b 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 0b 08 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 08 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 00 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 0f 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 00 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 0f 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 00 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 12 00 00 00 00 00 ..........
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 0]
0000: a1 01 00 00 00 00 00 00 00 00 ..........
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x02 interval 32
Mode: Sniff
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x02 interval 162
Mode: Sniff
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 42 mode 0x02 interval 402
Mode: Sniff
--
Brad Midgley