2009-07-25 10:01:43

by Oliver Hartkopp

[permalink] [raw]
Subject: tty_register_device NULL pointer dereference in 2.6.31-rc4

Hello Alan and Marcel,

this morning i got a NULL pointer dereference in tty_register_device() that
looked similar to the one, i posted here on 03-jun-2009:

http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2

As the boot sequence stopped after this point, i was only able to take a
picture of it - see attached jpg.

I was able to shut down the system gracefully by pressing the power button.

The problem emerges really seldom.

Any idea?

Regards,
Oliver




Attachments:
tty_register_device_2-6-31-rc4.jpg (131.35 kB)

2009-07-31 11:20:19

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Dave Young wrote:
> On Fri, Jul 31, 2009 at 5:39 PM, Dave Young<[email protected]> wrote:
>> On Thu, Jul 30, 2009 at 12:05:55PM +0200, Oliver Hartkopp wrote:
>>> Dave Young wrote:
>>>> On Wed, Jul 29, 2009 at 10:00 PM, Oliver Hartkopp<[email protected]> wrote:
>>>>> Hi Dave,
>>>>>
>>>>> i got it again - even with your patch (that's why it's 2.6.31-rc4-dirty in the
>>>>> attached screenshot).
>>>> Weird, the oops occurs between sock init and tty init routines. Could
>>>> you tell your bluez version and your configuration?
>>>>
>>> No problem:
>> Thanks.
>>
>> It's still reasonable, after rfcomm sock layer initialized, userspace do sock ioctl callback but tty layer was not initilized yet at this time.
>>
>> Could you confirm it by applying following debug patch on top of my previous patch? if you get more oops with it then above reason will be right.
>>
>> --- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-07-31 17:14:07.000000000 +0800
>> +++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-07-31 17:30:39.000000000 +0800
>> @@ -36,6 +36,7 @@
>> #include <linux/net.h>
>> #include <linux/mutex.h>
>> #include <linux/kthread.h>
>> +#include <linux/nmi.h>
>>
>> #include <net/sock.h>
>> #include <asm/uaccess.h>
>> @@ -2080,7 +2081,7 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
>> /* ---- Initialization ---- */
>> static int __init rfcomm_init(void)
>> {
>> - int ret;
>> + int ret, i;
>>
>> l2cap_load();
>>
>> @@ -2088,6 +2089,12 @@ static int __init rfcomm_init(void)
>> if (ret)
>> goto out_sock;
>>
>> + /* delay 5 seconds to trigger the tty bug */
>> + for (i = 0; i < 50; i++) {
>> + touch_nmi_watchdog();
>> + mdelay(100);
>
> Hi, for this case, msleep is better, you can just replace the above
> two lines with msleep(100)
>

Hi Dave,

applied this patch and replaced mdelay(100) with msleep(100).

I got two crashes and three proper boots.

The crashes look like the formerly posted screenshots.
When it boots properly i can see the delay in the boot process.

Does this help?

Regards,
Oliver

2009-07-31 10:10:21

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Fri, Jul 31, 2009 at 5:39 PM, Dave Young<[email protected]> wrot=
e:
> On Thu, Jul 30, 2009 at 12:05:55PM +0200, Oliver Hartkopp wrote:
>> Dave Young wrote:
>> > On Wed, Jul 29, 2009 at 10:00 PM, Oliver Hartkopp<[email protected]>=
wrote:
>> >> Hi Dave,
>> >>
>> >> i got it again - even with your patch (that's why it's 2.6.31-rc4-dir=
ty in the
>> >> attached screenshot).
>> >
>> > Weird, the oops occurs between sock init and tty init routines. Could
>> > you tell your bluez version and your configuration?
>> >
>>
>> No problem:
>
> Thanks.
>
> It's still reasonable, after rfcomm sock layer initialized, userspace do =
sock ioctl callback but tty layer was not initilized yet at this time.
>
> Could you confirm it by applying following debug patch on top of my previ=
ous patch? if you get more oops with it then above reason will be right.
>
> --- linux-2.6.orig/net/bluetooth/rfcomm/core.c =C2=A02009-07-31 17:14:07.=
000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/core.c =C2=A0 =C2=A0 =C2=A0 2009-07-31=
17:30:39.000000000 +0800
> @@ -36,6 +36,7 @@
> =C2=A0#include <linux/net.h>
> =C2=A0#include <linux/mutex.h>
> =C2=A0#include <linux/kthread.h>
> +#include <linux/nmi.h>
>
> =C2=A0#include <net/sock.h>
> =C2=A0#include <asm/uaccess.h>
> @@ -2080,7 +2081,7 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
> =C2=A0/* ---- Initialization ---- */
> =C2=A0static int __init rfcomm_init(void)
> =C2=A0{
> - =C2=A0 =C2=A0 =C2=A0 int ret;
> + =C2=A0 =C2=A0 =C2=A0 int ret, i;
>
> =C2=A0 =C2=A0 =C2=A0 =C2=A0l2cap_load();
>
> @@ -2088,6 +2089,12 @@ static int __init rfcomm_init(void)
> =C2=A0 =C2=A0 =C2=A0 =C2=A0if (ret)
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0goto out_sock;
>
> + =C2=A0 =C2=A0 =C2=A0 /* delay 5 seconds to trigger the tty bug */
> + =C2=A0 =C2=A0 =C2=A0 for (i =3D 0; i < 50; i++) {
> + =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 touch_nmi_watchdog();
> + =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 mdelay(100);

Hi, for this case, msleep is better, you can just replace the above
two lines with msleep(100)

> + =C2=A0 =C2=A0 =C2=A0 }
> +
> =C2=A0 =C2=A0 =C2=A0 =C2=A0ret =3D rfcomm_init_ttys();
> =C2=A0 =C2=A0 =C2=A0 =C2=A0if (ret)
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0goto out_tty;
>



--=20
Regards
dave

2009-07-31 09:39:50

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Thu, Jul 30, 2009 at 12:05:55PM +0200, Oliver Hartkopp wrote:
> Dave Young wrote:
> > On Wed, Jul 29, 2009 at 10:00 PM, Oliver Hartkopp<[email protected]> wrote:
> >> Hi Dave,
> >>
> >> i got it again - even with your patch (that's why it's 2.6.31-rc4-dirty in the
> >> attached screenshot).
> >
> > Weird, the oops occurs between sock init and tty init routines. Could
> > you tell your bluez version and your configuration?
> >
>
> No problem:

Thanks.

It's still reasonable, after rfcomm sock layer initialized, userspace do sock ioctl callback but tty layer was not initilized yet at this time.

Could you confirm it by applying following debug patch on top of my previous patch? if you get more oops with it then above reason will be right.

--- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-07-31 17:14:07.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-07-31 17:30:39.000000000 +0800
@@ -36,6 +36,7 @@
#include <linux/net.h>
#include <linux/mutex.h>
#include <linux/kthread.h>
+#include <linux/nmi.h>

#include <net/sock.h>
#include <asm/uaccess.h>
@@ -2080,7 +2081,7 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
- int ret;
+ int ret, i;

l2cap_load();

@@ -2088,6 +2089,12 @@ static int __init rfcomm_init(void)
if (ret)
goto out_sock;

+ /* delay 5 seconds to trigger the tty bug */
+ for (i = 0; i < 50; i++) {
+ touch_nmi_watchdog();
+ mdelay(100);
+ }
+
ret = rfcomm_init_ttys();
if (ret)
goto out_tty;

2009-07-30 10:05:55

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Dave Young wrote:
> On Wed, Jul 29, 2009 at 10:00 PM, Oliver Hartkopp<[email protected]> wrote:
>> Hi Dave,
>>
>> i got it again - even with your patch (that's why it's 2.6.31-rc4-dirty in the
>> attached screenshot).
>
> Weird, the oops occurs between sock init and tty init routines. Could
> you tell your bluez version and your configuration?
>

No problem:

Hardware here is a Dell 830.

And the Oops is still rare ;-)

Distro is a Debian

$> dpkg -l | grep blue

ii bluez-audio 3.36-3 Bluetooth
audio support
ii bluez-gnome 0.27-1 Bluetooth
utilities for GNOME
ii bluez-utils 3.36-3 Bluetooth
tools and daemons
ii libbluetooth2 3.36-1 Library to
use the BlueZ Linux Bluetooth stack


config-2.6.31-rc4-dirty:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc4
# Thu Jul 23 08:14:21 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_OLD_MCE is not set
CONFIG_X86_NEW_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda8"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=m
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_PLATFORM=m
# CONFIG_CAN_EMS_PCI is not set
# CONFIG_CAN_KVASER_PCI is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_DELL_LAPTOP=m
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_CDC_PHONET=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=m
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

2009-07-30 09:15:21

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Wed, Jul 29, 2009 at 10:00 PM, Oliver Hartkopp<[email protected]> wrote:
> Dave Young wrote:
>> On Mon, Jul 27, 2009 at 01:39:03PM +0200, Oliver Hartkopp wrote:
>>> Oliver Hartkopp wrote:
>>>> Dave Young wrote:
>>>>> On Sat, Jul 25, 2009 at 01:10:46PM +0100, Alan Cox wrote:
>>>>>>>> tty_register_device appears to have been called with a NULL pointer. Not
>>>>>>>> sure why however.
>>>>>>> if that is the pointer for the struct device, then that used to be fine
>>>>>>> in the past. Not all RFCOMM device have a parent when they are created.
>>>>>> The tty layer doesn't care about the struct device really. Nothing there
>>>>>> has changed. The NULL passed appears to be the driver argument.
>>>>> Agree with you, because in rfcomm_init, rfcomm thread run before tty initilized, the following patch may fix the problem.
>>>>> oliver, could you verify it it fix your problem?
>>>> Hi Dave,
>>>>
>>>> i get this problem really seldom on my Laptop and i did not manage to get a
>>>> reproducible Oops of that problem.
>>>>
>>>> Anyway the code you are pointing to seems to have a problem and your added
>>>> error handling looks good to me - even if i don't know if the initializations
>>>> can be reordered in that way.
>>>>
>>>> I'll try your patch, but it could take a *long* time to prove it right ;-)
>>>>
>>> Just FYI:
>>>
>>> Your patch compiled, the system booted without problems and nothing is broken
>>> so far. I checked the BT, WLAN and BT dial-up with success. So it looks good
>>> to me.
>>
>> Thanks for the testing. Marcel, could you take a look?
>
> Hi Dave,
>
> i got it again - even with your patch (that's why it's 2.6.31-rc4-dirty in the
> attached screenshot).

Weird, the oops occurs between sock init and tty init routines. Could
you tell your bluez version and your configuration?

--
Regards
dave

2009-07-29 14:00:36

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Dave Young wrote:
> On Mon, Jul 27, 2009 at 01:39:03PM +0200, Oliver Hartkopp wrote:
>> Oliver Hartkopp wrote:
>>> Dave Young wrote:
>>>> On Sat, Jul 25, 2009 at 01:10:46PM +0100, Alan Cox wrote:
>>>>>>> tty_register_device appears to have been called with a NULL pointer. Not
>>>>>>> sure why however.
>>>>>> if that is the pointer for the struct device, then that used to be fine
>>>>>> in the past. Not all RFCOMM device have a parent when they are created.
>>>>> The tty layer doesn't care about the struct device really. Nothing there
>>>>> has changed. The NULL passed appears to be the driver argument.
>>>> Agree with you, because in rfcomm_init, rfcomm thread run before tty initilized, the following patch may fix the problem.
>>>> oliver, could you verify it it fix your problem?
>>> Hi Dave,
>>>
>>> i get this problem really seldom on my Laptop and i did not manage to get a
>>> reproducible Oops of that problem.
>>>
>>> Anyway the code you are pointing to seems to have a problem and your added
>>> error handling looks good to me - even if i don't know if the initializations
>>> can be reordered in that way.
>>>
>>> I'll try your patch, but it could take a *long* time to prove it right ;-)
>>>
>> Just FYI:
>>
>> Your patch compiled, the system booted without problems and nothing is broken
>> so far. I checked the BT, WLAN and BT dial-up with success. So it looks good
>> to me.
>
> Thanks for the testing. Marcel, could you take a look?

Hi Dave,

i got it again - even with your patch (that's why it's 2.6.31-rc4-dirty in the
attached screenshot).

Sorry ;-)

Best regards,
Oliver


Attachments:
tty_register_device_2-6-31-rc4-patched-by-dave.jpg (124.05 kB)

2009-07-27 14:07:36

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Mon, Jul 27, 2009 at 01:39:03PM +0200, Oliver Hartkopp wrote:
> Oliver Hartkopp wrote:
> > Dave Young wrote:
> >> On Sat, Jul 25, 2009 at 01:10:46PM +0100, Alan Cox wrote:
> >>>>> tty_register_device appears to have been called with a NULL pointer. Not
> >>>>> sure why however.
> >>>> if that is the pointer for the struct device, then that used to be fine
> >>>> in the past. Not all RFCOMM device have a parent when they are created.
> >>> The tty layer doesn't care about the struct device really. Nothing there
> >>> has changed. The NULL passed appears to be the driver argument.
> >> Agree with you, because in rfcomm_init, rfcomm thread run before tty initilized, the following patch may fix the problem.
> >> oliver, could you verify it it fix your problem?
> >
> > Hi Dave,
> >
> > i get this problem really seldom on my Laptop and i did not manage to get a
> > reproducible Oops of that problem.
> >
> > Anyway the code you are pointing to seems to have a problem and your added
> > error handling looks good to me - even if i don't know if the initializations
> > can be reordered in that way.
> >
> > I'll try your patch, but it could take a *long* time to prove it right ;-)
> >
>
> Just FYI:
>
> Your patch compiled, the system booted without problems and nothing is broken
> so far. I checked the BT, WLAN and BT dial-up with success. So it looks good
> to me.

Thanks for the testing. Marcel, could you take a look?

>
> Regards,
> Oliver

2009-07-27 11:39:03

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Oliver Hartkopp wrote:
> Dave Young wrote:
>> On Sat, Jul 25, 2009 at 01:10:46PM +0100, Alan Cox wrote:
>>>>> tty_register_device appears to have been called with a NULL pointer. Not
>>>>> sure why however.
>>>> if that is the pointer for the struct device, then that used to be fine
>>>> in the past. Not all RFCOMM device have a parent when they are created.
>>> The tty layer doesn't care about the struct device really. Nothing there
>>> has changed. The NULL passed appears to be the driver argument.
>> Agree with you, because in rfcomm_init, rfcomm thread run before tty initilized, the following patch may fix the problem.
>> oliver, could you verify it it fix your problem?
>
> Hi Dave,
>
> i get this problem really seldom on my Laptop and i did not manage to get a
> reproducible Oops of that problem.
>
> Anyway the code you are pointing to seems to have a problem and your added
> error handling looks good to me - even if i don't know if the initializations
> can be reordered in that way.
>
> I'll try your patch, but it could take a *long* time to prove it right ;-)
>

Just FYI:

Your patch compiled, the system booted without problems and nothing is broken
so far. I checked the BT, WLAN and BT dial-up with success. So it looks good
to me.

Regards,
Oliver

2009-07-27 11:12:35

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Dave Young wrote:
> On Sat, Jul 25, 2009 at 01:10:46PM +0100, Alan Cox wrote:
>>>> tty_register_device appears to have been called with a NULL pointer. Not
>>>> sure why however.
>>> if that is the pointer for the struct device, then that used to be fine
>>> in the past. Not all RFCOMM device have a parent when they are created.
>> The tty layer doesn't care about the struct device really. Nothing there
>> has changed. The NULL passed appears to be the driver argument.
>
> Agree with you, because in rfcomm_init, rfcomm thread run before tty initilized, the following patch may fix the problem.
> oliver, could you verify it it fix your problem?

Hi Dave,

i get this problem really seldom on my Laptop and i did not manage to get a
reproducible Oops of that problem.

Anyway the code you are pointing to seems to have a problem and your added
error handling looks good to me - even if i don't know if the initializations
can be reordered in that way.

I'll try your patch, but it could take a *long* time to prove it right ;-)

Maybe Marcel and Alan can better prove it to be correct by code review.

Many thanks,
Oliver


> ---
>
> rfcomm tty may be used before rfcomm_tty_driver initilized,
>
> reporting in:
> http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2
>
> make 3 changes:
> 1. remove #ifdef in rfcomm/core.c,
> make it blank function when rfcomm tty not selected in rfcomm.h
>
> 2. tune the rfcomm_init error patch to ensure
> tty driver initilized before any usage.
>
> 3. remove __exit for rfcomm_cleanup_sockets
> because above change need call it in a __init function.
>
>
> CC: Alan Cox <[email protected]>
> Reported-by: Oliver Hartkopp <[email protected]>
> Signed-off-by: Dave Young <[email protected]>
> --
> include/net/bluetooth/rfcomm.h | 13 ++++++++++++-
> net/bluetooth/rfcomm/core.c | 31 +++++++++++++++++++++----------
> net/bluetooth/rfcomm/sock.c | 2 +-
> 3 files changed, 34 insertions(+), 12 deletions(-)
>
> --- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-04-09 16:23:03.000000000 +0800
> +++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-07-27 17:14:43.000000000 +0800
> @@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
> };
>
> int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
> +
> +#ifdef CONFIG_BT_RFCOMM_TTY
> int rfcomm_init_ttys(void);
> void rfcomm_cleanup_ttys(void);
> -
> +#else
> +static inline int rfcomm_init_ttys(void)
> +{
> + return 0;
> +}
> +static inline int rfcomm_cleanup_ttys(void)
> +{
> + return 0;
> +}
> +#endif
> #endif /* __RFCOMM_H */
> --- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-06-16 17:39:32.000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-07-27 17:24:27.000000000 +0800
> @@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
> /* ---- Initialization ---- */
> static int __init rfcomm_init(void)
> {
> + int ret;
> +
> l2cap_load();
>
> + ret = rfcomm_init_sockets();
> + if (ret)
> + goto out_sock;
> +
> + ret = rfcomm_init_ttys();
> + if (ret)
> + goto out_tty;
> +
> hci_register_cb(&rfcomm_cb);
>
> rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
> if (IS_ERR(rfcomm_thread)) {
> - hci_unregister_cb(&rfcomm_cb);
> - return PTR_ERR(rfcomm_thread);
> + ret = PTR_ERR(rfcomm_thread);
> + goto out_thread;
> }
>
> if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
> BT_ERR("Failed to create RFCOMM info file");
>
> - rfcomm_init_sockets();
> -
> -#ifdef CONFIG_BT_RFCOMM_TTY
> - rfcomm_init_ttys();
> -#endif
> -
> BT_INFO("RFCOMM ver %s", VERSION);
>
> return 0;
> +
> +out_thread:
> + hci_unregister_cb(&rfcomm_cb);
> +out_tty:
> + rfcomm_cleanup_ttys();
> +out_sock:
> + rfcomm_cleanup_sockets();
> +
> + return ret;
> }
>
> static void __exit rfcomm_exit(void)
> @@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)
>
> kthread_stop(rfcomm_thread);
>
> -#ifdef CONFIG_BT_RFCOMM_TTY
> rfcomm_cleanup_ttys();
> -#endif
>
> rfcomm_cleanup_sockets();
> }
> --- linux-2.6.orig/net/bluetooth/rfcomm/sock.c 2009-04-09 16:23:04.000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/sock.c 2009-07-27 17:39:43.000000000 +0800
> @@ -1132,7 +1132,7 @@ error:
> return err;
> }
>
> -void __exit rfcomm_cleanup_sockets(void)
> +void rfcomm_cleanup_sockets(void)
> {
> class_remove_file(bt_class, &class_attr_rfcomm);
>

2009-07-27 09:59:05

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Sat, Jul 25, 2009 at 01:10:46PM +0100, Alan Cox wrote:
> > > tty_register_device appears to have been called with a NULL pointer. Not
> > > sure why however.
> >
> > if that is the pointer for the struct device, then that used to be fine
> > in the past. Not all RFCOMM device have a parent when they are created.
>
> The tty layer doesn't care about the struct device really. Nothing there
> has changed. The NULL passed appears to be the driver argument.

Agree with you, because in rfcomm_init, rfcomm thread run before tty initilized, the following patch may fix the problem. oliver, could you verify it it fix your problem?
---

rfcomm tty may be used before rfcomm_tty_driver initilized,

reporting in:
http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2

make 3 changes:
1. remove #ifdef in rfcomm/core.c,
make it blank function when rfcomm tty not selected in rfcomm.h

2. tune the rfcomm_init error patch to ensure
tty driver initilized before any usage.

3. remove __exit for rfcomm_cleanup_sockets
because above change need call it in a __init function.


CC: Alan Cox <[email protected]>
Reported-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Dave Young <[email protected]>
--
include/net/bluetooth/rfcomm.h | 13 ++++++++++++-
net/bluetooth/rfcomm/core.c | 31 +++++++++++++++++++++----------
net/bluetooth/rfcomm/sock.c | 2 +-
3 files changed, 34 insertions(+), 12 deletions(-)

--- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-04-09 16:23:03.000000000 +0800
+++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-07-27 17:14:43.000000000 +0800
@@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
};

int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
int rfcomm_init_ttys(void);
void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+ return 0;
+}
+static inline int rfcomm_cleanup_ttys(void)
+{
+ return 0;
+}
+#endif
#endif /* __RFCOMM_H */
--- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-06-16 17:39:32.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-07-27 17:24:27.000000000 +0800
@@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
+ int ret;
+
l2cap_load();

+ ret = rfcomm_init_sockets();
+ if (ret)
+ goto out_sock;
+
+ ret = rfcomm_init_ttys();
+ if (ret)
+ goto out_tty;
+
hci_register_cb(&rfcomm_cb);

rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- hci_unregister_cb(&rfcomm_cb);
- return PTR_ERR(rfcomm_thread);
+ ret = PTR_ERR(rfcomm_thread);
+ goto out_thread;
}

if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");

- rfcomm_init_sockets();
-
-#ifdef CONFIG_BT_RFCOMM_TTY
- rfcomm_init_ttys();
-#endif
-
BT_INFO("RFCOMM ver %s", VERSION);

return 0;
+
+out_thread:
+ hci_unregister_cb(&rfcomm_cb);
+out_tty:
+ rfcomm_cleanup_ttys();
+out_sock:
+ rfcomm_cleanup_sockets();
+
+ return ret;
}

static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)

kthread_stop(rfcomm_thread);

-#ifdef CONFIG_BT_RFCOMM_TTY
rfcomm_cleanup_ttys();
-#endif

rfcomm_cleanup_sockets();
}
--- linux-2.6.orig/net/bluetooth/rfcomm/sock.c 2009-04-09 16:23:04.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/sock.c 2009-07-27 17:39:43.000000000 +0800
@@ -1132,7 +1132,7 @@ error:
return err;
}

-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
{
class_remove_file(bt_class, &class_attr_rfcomm);


2009-07-25 12:10:46

by Alan Cox

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

> > tty_register_device appears to have been called with a NULL pointer. Not
> > sure why however.
>
> if that is the pointer for the struct device, then that used to be fine
> in the past. Not all RFCOMM device have a parent when they are created.

The tty layer doesn't care about the struct device really. Nothing there
has changed. The NULL passed appears to be the driver argument.

2009-07-25 11:07:33

by Marcel Holtmann

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Hi Alan,

> > this morning i got a NULL pointer dereference in tty_register_device() that
> > looked similar to the one, i posted here on 03-jun-2009:
> >
> > http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2
> >
> > As the boot sequence stopped after this point, i was only able to take a
> > picture of it - see attached jpg.
> >
> > I was able to shut down the system gracefully by pressing the power button.
> >
> > The problem emerges really seldom.
> >
> > Any idea?
>
> tty_register_device appears to have been called with a NULL pointer. Not
> sure why however.

if that is the pointer for the struct device, then that used to be fine
in the past. Not all RFCOMM device have a parent when they are created.

Regards

Marcel



2009-07-25 10:50:11

by Alan Cox

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Sat, 25 Jul 2009 12:01:43 +0200
Oliver Hartkopp <[email protected]> wrote:

> Hello Alan and Marcel,
>
> this morning i got a NULL pointer dereference in tty_register_device() that
> looked similar to the one, i posted here on 03-jun-2009:
>
> http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2
>
> As the boot sequence stopped after this point, i was only able to take a
> picture of it - see attached jpg.
>
> I was able to shut down the system gracefully by pressing the power button.
>
> The problem emerges really seldom.
>
> Any idea?

tty_register_device appears to have been called with a NULL pointer. Not
sure why however.

2009-08-03 12:03:33

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Dave Young wrote:
> On Sat, Aug 01, 2009 at 11:21:28AM +0200, Oliver Hartkopp wrote:
>>> --- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 10:53:18.000000000 +0800
>>> +++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 10:55:29.000000000 +0800
>>> @@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
>>> };
>>>
>>> int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
>>> +
>>> +#ifdef CONFIG_BT_RFCOMM_TTY
>>> int rfcomm_init_ttys(void);
>>> void rfcomm_cleanup_ttys(void);
>>> -
>>> +#else
>>> +static inline int rfcomm_init_ttys(void)
>>> +{
>>> + return 0;
>>> +}
>>> +static inline int rfcomm_cleanup_ttys(void)
>>> +{
>>> + return 0;
>>> +}
>>> +#endif
>> Just a minor thing:
>>
>> Does rfcomm_cleanup_ttys() return 'int' or is it 'void' ?
>
> Yes it should be void. Thanks for pointing out, here update the patch:

Hi Dave,

the latest approach seems to fit.

I booted about 25+ times without any problems.
Even the upgrade from Debian Lenny to Squeeze did not cause any probs with
bluetooth.

Tested-by: Oliver Hartkopp <[email protected]>

Thanks!

> ---
>
> rfcomm tty may be used before rfcomm_tty_driver initilized,
> The problem is that now socket layer init before tty layer, if userspace
> program do socket callback right here then oops will happen.
>
> reporting in:
> http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2
>
> make 3 changes:
> 1. remove #ifdef in rfcomm/core.c,
> make it blank function when rfcomm tty not selected in rfcomm.h
>
> 2. tune the rfcomm_init error patch to ensure
> tty driver initilized before rfcomm socket usage.
>
> 3. remove __exit for rfcomm_cleanup_sockets
> because above change need call it in a __init function.
>
>
> CC: Alan Cox <[email protected]guk.ukuu.org.uk>
> Reported-by: Oliver Hartkopp <[email protected]>
> Signed-off-by: Dave Young <[email protected]>
> --
> include/net/bluetooth/rfcomm.h | 12 +++++++++++-
> net/bluetooth/rfcomm/core.c | 29 ++++++++++++++++++++---------
> net/bluetooth/rfcomm/sock.c | 2 +-
> 3 files changed, 32 insertions(+), 11 deletions(-)
>
> --- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 13:56:53.000000000 +0800
> +++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 17:24:59.000000000 +0800
> @@ -355,7 +355,17 @@ struct rfcomm_dev_list_req {
> };
>
> int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
> +
> +#ifdef CONFIG_BT_RFCOMM_TTY
> int rfcomm_init_ttys(void);
> void rfcomm_cleanup_ttys(void);
> -
> +#else
> +static inline int rfcomm_init_ttys(void)
> +{
> + return 0;
> +}
> +static inline void rfcomm_cleanup_ttys(void)
> +{
> +}
> +#endif
> #endif /* __RFCOMM_H */
> --- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-08-01 13:56:53.000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-08-01 13:57:18.000000000 +0800
> @@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
> /* ---- Initialization ---- */
> static int __init rfcomm_init(void)
> {
> + int ret;
> +
> l2cap_load();
>
> hci_register_cb(&rfcomm_cb);
>
> rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
> if (IS_ERR(rfcomm_thread)) {
> - hci_unregister_cb(&rfcomm_cb);
> - return PTR_ERR(rfcomm_thread);
> + ret = PTR_ERR(rfcomm_thread);
> + goto out_thread;
> }
>
> if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
> BT_ERR("Failed to create RFCOMM info file");
>
> - rfcomm_init_sockets();
> -
> -#ifdef CONFIG_BT_RFCOMM_TTY
> - rfcomm_init_ttys();
> -#endif
> + ret = rfcomm_init_ttys();
> + if (ret)
> + goto out_tty;
> +
> + ret = rfcomm_init_sockets();
> + if (ret)
> + goto out_sock;
>
> BT_INFO("RFCOMM ver %s", VERSION);
>
> return 0;
> +
> +out_sock:
> + rfcomm_cleanup_ttys();
> +out_tty:
> + kthread_stop(rfcomm_thread);
> +out_thread:
> + hci_unregister_cb(&rfcomm_cb);
> +
> + return ret;
> }
>
> static void __exit rfcomm_exit(void)
> @@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)
>
> kthread_stop(rfcomm_thread);
>
> -#ifdef CONFIG_BT_RFCOMM_TTY
> rfcomm_cleanup_ttys();
> -#endif
>
> rfcomm_cleanup_sockets();
> }
> --- linux-2.6.orig/net/bluetooth/rfcomm/sock.c 2009-08-01 13:56:53.000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/sock.c 2009-08-01 13:57:18.000000000 +0800
> @@ -1132,7 +1132,7 @@ error:
> return err;
> }
>
> -void __exit rfcomm_cleanup_sockets(void)
> +void rfcomm_cleanup_sockets(void)
> {
> class_remove_file(bt_class, &class_attr_rfcomm);
>

2009-08-01 09:32:07

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Sat, Aug 01, 2009 at 11:21:28AM +0200, Oliver Hartkopp wrote:
>
> > --- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 10:53:18.000000000 +0800
> > +++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 10:55:29.000000000 +0800
> > @@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
> > };
> >
> > int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
> > +
> > +#ifdef CONFIG_BT_RFCOMM_TTY
> > int rfcomm_init_ttys(void);
> > void rfcomm_cleanup_ttys(void);
> > -
> > +#else
> > +static inline int rfcomm_init_ttys(void)
> > +{
> > + return 0;
> > +}
> > +static inline int rfcomm_cleanup_ttys(void)
> > +{
> > + return 0;
> > +}
> > +#endif
>
> Just a minor thing:
>
> Does rfcomm_cleanup_ttys() return 'int' or is it 'void' ?

Yes it should be void. Thanks for pointing out, here update the patch:
---

rfcomm tty may be used before rfcomm_tty_driver initilized,
The problem is that now socket layer init before tty layer, if userspace
program do socket callback right here then oops will happen.

reporting in:
http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2

make 3 changes:
1. remove #ifdef in rfcomm/core.c,
make it blank function when rfcomm tty not selected in rfcomm.h

2. tune the rfcomm_init error patch to ensure
tty driver initilized before rfcomm socket usage.

3. remove __exit for rfcomm_cleanup_sockets
because above change need call it in a __init function.


CC: Alan Cox <[email protected]>
Reported-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Dave Young <[email protected]>
--
include/net/bluetooth/rfcomm.h | 12 +++++++++++-
net/bluetooth/rfcomm/core.c | 29 ++++++++++++++++++++---------
net/bluetooth/rfcomm/sock.c | 2 +-
3 files changed, 32 insertions(+), 11 deletions(-)

--- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 13:56:53.000000000 +0800
+++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 17:24:59.000000000 +0800
@@ -355,7 +355,17 @@ struct rfcomm_dev_list_req {
};

int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
int rfcomm_init_ttys(void);
void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+ return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
#endif /* __RFCOMM_H */
--- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-08-01 13:56:53.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-08-01 13:57:18.000000000 +0800
@@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
+ int ret;
+
l2cap_load();

hci_register_cb(&rfcomm_cb);

rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- hci_unregister_cb(&rfcomm_cb);
- return PTR_ERR(rfcomm_thread);
+ ret = PTR_ERR(rfcomm_thread);
+ goto out_thread;
}

if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");

- rfcomm_init_sockets();
-
-#ifdef CONFIG_BT_RFCOMM_TTY
- rfcomm_init_ttys();
-#endif
+ ret = rfcomm_init_ttys();
+ if (ret)
+ goto out_tty;
+
+ ret = rfcomm_init_sockets();
+ if (ret)
+ goto out_sock;

BT_INFO("RFCOMM ver %s", VERSION);

return 0;
+
+out_sock:
+ rfcomm_cleanup_ttys();
+out_tty:
+ kthread_stop(rfcomm_thread);
+out_thread:
+ hci_unregister_cb(&rfcomm_cb);
+
+ return ret;
}

static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)

kthread_stop(rfcomm_thread);

-#ifdef CONFIG_BT_RFCOMM_TTY
rfcomm_cleanup_ttys();
-#endif

rfcomm_cleanup_sockets();
}
--- linux-2.6.orig/net/bluetooth/rfcomm/sock.c 2009-08-01 13:56:53.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/sock.c 2009-08-01 13:57:18.000000000 +0800
@@ -1132,7 +1132,7 @@ error:
return err;
}

-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
{
class_remove_file(bt_class, &class_attr_rfcomm);


2009-08-01 09:21:28

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4


> --- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 10:53:18.000000000 +0800
> +++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 10:55:29.000000000 +0800
> @@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
> };
>
> int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
> +
> +#ifdef CONFIG_BT_RFCOMM_TTY
> int rfcomm_init_ttys(void);
> void rfcomm_cleanup_ttys(void);
> -
> +#else
> +static inline int rfcomm_init_ttys(void)
> +{
> + return 0;
> +}
> +static inline int rfcomm_cleanup_ttys(void)
> +{
> + return 0;
> +}
> +#endif

Just a minor thing:

Does rfcomm_cleanup_ttys() return 'int' or is it 'void' ?

Regards,
Oliver

2009-08-01 09:15:24

by Oliver Hartkopp

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

Dave Young wrote:
> On Fri, Jul 31, 2009 at 01:20:19PM +0200, Oliver Hartkopp wrote:

>> applied this patch and replaced mdelay(100) with msleep(100).
>>
>> I got two crashes and three proper boots.
>>
>> The crashes look like the formerly posted screenshots.
>> When it boots properly i can see the delay in the boot process.
>>
>> Does this help?
>
> Yes, I think so.
>
> Please unapply the before two patch, try the following v2 patch instead.
> Changes from v1: fixes 'goto' path again, make tty init before sock init.

Hi Dave,

i did a 'git reset --hard' to get back to vanilla 2.6.31-rc4 .

Applied the v2 patch and booted five times without any problems.

I'll keep you informed if anything changes ;-)

Thanks,
Oliver


> ---
>
> rfcomm tty may be used before rfcomm_tty_driver initilized,
> The problem is that now socket layer init before tty layer, if userspace
> program do socket callback right here then oops will happen.
>
> reporting in:
> http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2
>
> make 3 changes:
> 1. remove #ifdef in rfcomm/core.c,
> make it blank function when rfcomm tty not selected in rfcomm.h
>
> 2. tune the rfcomm_init error patch to ensure
> tty driver initilized before rfcomm socket usage.
>
> 3. remove __exit for rfcomm_cleanup_sockets
> because above change need call it in a __init function.
>
>
> CC: Alan Cox <[email protected]>
> Reported-by: Oliver Hartkopp <[email protected]>
> Signed-off-by: Dave Young <[email protected]>
> --
> include/net/bluetooth/rfcomm.h | 13 ++++++++++++-
> net/bluetooth/rfcomm/core.c | 29 ++++++++++++++++++++---------
> net/bluetooth/rfcomm/sock.c | 2 +-
> 3 files changed, 33 insertions(+), 11 deletions(-)
>
> --- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 10:53:18.000000000 +0800
> +++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 10:55:29.000000000 +0800
> @@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
> };
>
> int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
> +
> +#ifdef CONFIG_BT_RFCOMM_TTY
> int rfcomm_init_ttys(void);
> void rfcomm_cleanup_ttys(void);
> -
> +#else
> +static inline int rfcomm_init_ttys(void)
> +{
> + return 0;
> +}
> +static inline int rfcomm_cleanup_ttys(void)
> +{
> + return 0;
> +}
> +#endif
> #endif /* __RFCOMM_H */
> --- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-08-01 10:53:18.000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-08-01 11:03:24.000000000 +0800
> @@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
> /* ---- Initialization ---- */
> static int __init rfcomm_init(void)
> {
> + int ret;
> +
> l2cap_load();
>
> hci_register_cb(&rfcomm_cb);
>
> rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
> if (IS_ERR(rfcomm_thread)) {
> - hci_unregister_cb(&rfcomm_cb);
> - return PTR_ERR(rfcomm_thread);
> + ret = PTR_ERR(rfcomm_thread);
> + goto out_thread;
> }
>
> if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
> BT_ERR("Failed to create RFCOMM info file");
>
> - rfcomm_init_sockets();
> -
> -#ifdef CONFIG_BT_RFCOMM_TTY
> - rfcomm_init_ttys();
> -#endif
> + ret = rfcomm_init_ttys();
> + if (ret)
> + goto out_tty;
> +
> + ret = rfcomm_init_sockets();
> + if (ret)
> + goto out_sock;
>
> BT_INFO("RFCOMM ver %s", VERSION);
>
> return 0;
> +
> +out_sock:
> + rfcomm_cleanup_ttys();
> +out_tty:
> + kthread_stop(rfcomm_thread);
> +out_thread:
> + hci_unregister_cb(&rfcomm_cb);
> +
> + return ret;
> }
>
> static void __exit rfcomm_exit(void)
> @@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)
>
> kthread_stop(rfcomm_thread);
>
> -#ifdef CONFIG_BT_RFCOMM_TTY
> rfcomm_cleanup_ttys();
> -#endif
>
> rfcomm_cleanup_sockets();
> }
> --- linux-2.6.orig/net/bluetooth/rfcomm/sock.c 2009-08-01 10:53:18.000000000 +0800
> +++ linux-2.6/net/bluetooth/rfcomm/sock.c 2009-08-01 10:55:29.000000000 +0800
> @@ -1132,7 +1132,7 @@ error:
> return err;
> }
>
> -void __exit rfcomm_cleanup_sockets(void)
> +void rfcomm_cleanup_sockets(void)
> {
> class_remove_file(bt_class, &class_attr_rfcomm);
>

2009-08-01 03:17:05

by Dave Young

[permalink] [raw]
Subject: Re: tty_register_device NULL pointer dereference in 2.6.31-rc4

On Fri, Jul 31, 2009 at 01:20:19PM +0200, Oliver Hartkopp wrote:
> Dave Young wrote:
> > On Fri, Jul 31, 2009 at 5:39 PM, Dave Young<[email protected]> wrote:
> >> On Thu, Jul 30, 2009 at 12:05:55PM +0200, Oliver Hartkopp wrote:
> >>> Dave Young wrote:
> >>>> On Wed, Jul 29, 2009 at 10:00 PM, Oliver Hartkopp<[email protected]> wrote:
> >>>>> Hi Dave,
> >>>>>
> >>>>> i got it again - even with your patch (that's why it's 2.6.31-rc4-dirty in the
> >>>>> attached screenshot).
> >>>> Weird, the oops occurs between sock init and tty init routines. Could
> >>>> you tell your bluez version and your configuration?
> >>>>
> >>> No problem:
> >> Thanks.
> >>
> >> It's still reasonable, after rfcomm sock layer initialized, userspace do sock ioctl callback but tty layer was not initilized yet at this time.
> >>
> >> Could you confirm it by applying following debug patch on top of my previous patch? if you get more oops with it then above reason will be right.
> >>
> >> --- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-07-31 17:14:07.000000000 +0800
> >> +++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-07-31 17:30:39.000000000 +0800
> >> @@ -36,6 +36,7 @@
> >> #include <linux/net.h>
> >> #include <linux/mutex.h>
> >> #include <linux/kthread.h>
> >> +#include <linux/nmi.h>
> >>
> >> #include <net/sock.h>
> >> #include <asm/uaccess.h>
> >> @@ -2080,7 +2081,7 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
> >> /* ---- Initialization ---- */
> >> static int __init rfcomm_init(void)
> >> {
> >> - int ret;
> >> + int ret, i;
> >>
> >> l2cap_load();
> >>
> >> @@ -2088,6 +2089,12 @@ static int __init rfcomm_init(void)
> >> if (ret)
> >> goto out_sock;
> >>
> >> + /* delay 5 seconds to trigger the tty bug */
> >> + for (i = 0; i < 50; i++) {
> >> + touch_nmi_watchdog();
> >> + mdelay(100);
> >
> > Hi, for this case, msleep is better, you can just replace the above
> > two lines with msleep(100)
> >
>
> Hi Dave,
>
> applied this patch and replaced mdelay(100) with msleep(100).
>
> I got two crashes and three proper boots.
>
> The crashes look like the formerly posted screenshots.
> When it boots properly i can see the delay in the boot process.
>
> Does this help?

Yes, I think so.

Please unapply the before two patch, try the following v2 patch instead.
Changes from v1: fixes 'goto' path again, make tty init before sock init.

Thanks.
---

rfcomm tty may be used before rfcomm_tty_driver initilized,
The problem is that now socket layer init before tty layer, if userspace
program do socket callback right here then oops will happen.

reporting in:
http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2

make 3 changes:
1. remove #ifdef in rfcomm/core.c,
make it blank function when rfcomm tty not selected in rfcomm.h

2. tune the rfcomm_init error patch to ensure
tty driver initilized before rfcomm socket usage.

3. remove __exit for rfcomm_cleanup_sockets
because above change need call it in a __init function.


CC: Alan Cox <[email protected]>
Reported-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Dave Young <[email protected]>
--
include/net/bluetooth/rfcomm.h | 13 ++++++++++++-
net/bluetooth/rfcomm/core.c | 29 ++++++++++++++++++++---------
net/bluetooth/rfcomm/sock.c | 2 +-
3 files changed, 33 insertions(+), 11 deletions(-)

--- linux-2.6.orig/include/net/bluetooth/rfcomm.h 2009-08-01 10:53:18.000000000 +0800
+++ linux-2.6/include/net/bluetooth/rfcomm.h 2009-08-01 10:55:29.000000000 +0800
@@ -355,7 +355,18 @@ struct rfcomm_dev_list_req {
};

int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
int rfcomm_init_ttys(void);
void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+ return 0;
+}
+static inline int rfcomm_cleanup_ttys(void)
+{
+ return 0;
+}
+#endif
#endif /* __RFCOMM_H */
--- linux-2.6.orig/net/bluetooth/rfcomm/core.c 2009-08-01 10:53:18.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/core.c 2009-08-01 11:03:24.000000000 +0800
@@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, r
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
+ int ret;
+
l2cap_load();

hci_register_cb(&rfcomm_cb);

rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- hci_unregister_cb(&rfcomm_cb);
- return PTR_ERR(rfcomm_thread);
+ ret = PTR_ERR(rfcomm_thread);
+ goto out_thread;
}

if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");

- rfcomm_init_sockets();
-
-#ifdef CONFIG_BT_RFCOMM_TTY
- rfcomm_init_ttys();
-#endif
+ ret = rfcomm_init_ttys();
+ if (ret)
+ goto out_tty;
+
+ ret = rfcomm_init_sockets();
+ if (ret)
+ goto out_sock;

BT_INFO("RFCOMM ver %s", VERSION);

return 0;
+
+out_sock:
+ rfcomm_cleanup_ttys();
+out_tty:
+ kthread_stop(rfcomm_thread);
+out_thread:
+ hci_unregister_cb(&rfcomm_cb);
+
+ return ret;
}

static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)

kthread_stop(rfcomm_thread);

-#ifdef CONFIG_BT_RFCOMM_TTY
rfcomm_cleanup_ttys();
-#endif

rfcomm_cleanup_sockets();
}
--- linux-2.6.orig/net/bluetooth/rfcomm/sock.c 2009-08-01 10:53:18.000000000 +0800
+++ linux-2.6/net/bluetooth/rfcomm/sock.c 2009-08-01 10:55:29.000000000 +0800
@@ -1132,7 +1132,7 @@ error:
return err;
}

-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
{
class_remove_file(bt_class, &class_attr_rfcomm);