Hi Dmitry,
On 06/10/2021 04:53, Dmitry Baryshkov wrote:
> This is a proposed power sequencer subsystem. This is a
> generification of the MMC pwrseq code. The subsystem tries to abstract
> the idea of complex power-up/power-down/reset of the devices.
>
> The primary set of devices that promted me to create this patchset is
> the Qualcomm BT+WiFi family of chips. They reside on serial+platform
> or serial + SDIO interfaces (older generations) or on serial+PCIe (newer
> generations). They require a set of external voltage regulators to be
> powered on and (some of them) have separate WiFi and Bluetooth enable
> GPIOs.
>
> The major drawback for now is the lack of proper PCIe integration
> At this moment support for PCIe is hacked up to be able to test the
> PCIe part of qca6390. Proper PCIe support would require automatically
> powering up the devices before the scan basing on the proper device
> structure in the device tree. This two last patches are noted as WIP and
> are included into the patchset for the purpose of testing WiFi on newer
> chips (like qca6390/qca6391).
>
> Changes since RFC v2:
> - Add documentation for the pwrseq code. Document data structures,
> macros and exported functions.
> - Export of_pwrseq_xlate_onecell()
> - Add separate pwrseq_set_drvdata() function to follow the typical API
> design
> - Remove pwrseq_get_optional()/devm_pwrseq_get_optional()
> - Moved code to handle old mmc-pwrseq binding to the MMC patch
> - Split of_pwrseq_xlate_onecell() support to a separate patch
>
> Changes since RFC v1:
> - Provider pwrseq fallback support
> - Implement fallback support in pwrseq_qca.
> - Mmove susclk handling to pwrseq_qca.
> - Significantly simplify hci_qca.c changes, by dropping all legacy
> code. Now hci_qca uses only pwrseq calls to power up/down bluetooth
> parts of the chip.
>
>
>
Tested-by: Caleb Connolly <[email protected]>
[Tested on the OnePlus 6]
--
Kind Regards,
Caleb (they/them)