2022-11-23 08:33:53

by Artem Lukyanov

[permalink] [raw]
Subject: [PATCH] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559

Add the support ID(0x0cb8, 0xc559) to usb_device_id table for
Realtek RTL8852BE.

The device info from /sys/kernel/debug/usb/devices as below.

T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cb8 ProdID=c559 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: Artem Lukyanov <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 271963805..f10d73d5b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -443,6 +443,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },

+ /* Realtek 8852BE Bluetooth devices */
+ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_REALTEK },
--
2.36.2


2022-11-23 09:01:44

by bluez.test.bot

[permalink] [raw]
Subject: RE: Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=698361

---Test result---

Test Summary:
CheckPatch PASS 0.57 seconds
GitLint PASS 0.28 seconds
SubjectPrefix PASS 0.10 seconds
BuildKernel PASS 33.44 seconds
BuildKernel32 PASS 31.03 seconds
TestRunnerSetup PASS 418.59 seconds
TestRunner_l2cap-tester PASS 15.72 seconds
TestRunner_iso-tester PASS 15.01 seconds
TestRunner_bnep-tester PASS 5.23 seconds
TestRunner_mgmt-tester PASS 107.58 seconds
TestRunner_rfcomm-tester PASS 9.18 seconds
TestRunner_sco-tester PASS 8.51 seconds
TestRunner_ioctl-tester PASS 9.82 seconds
TestRunner_mesh-tester PASS 6.60 seconds
TestRunner_smp-tester PASS 8.43 seconds
TestRunner_userchan-tester PASS 5.53 seconds
IncrementalBuild PASS 30.94 seconds



---
Regards,
Linux Bluetooth