From: "J. Bruce Fields" Subject: [PATCH 090/100] rdma: SVCRDMA recvfrom Date: Fri, 25 Jan 2008 18:17:10 -0500 Message-ID: <1201303040-7779-90-git-send-email-bfields@citi.umich.edu> References: <20080125231521.GG25141@fieldses.org> <1201303040-7779-1-git-send-email-bfields@citi.umich.edu> <1201303040-7779-2-git-send-email-bfields@citi.umich.edu> <1201303040-7779-3-git-send-email-bfields@citi.umich.edu> <1201303040-7779-4-git-send-email-bfields@citi.umich.edu> <1201303040-7779-5-git-send-email-bfields@citi.umich.edu> <1201303040-7779-6-git-send-email-bfields@citi.umich.edu> <1201303040-7779-7-git-send-email-bfields@citi.umich.edu> <1201303040-7779-8-git-send-email-bfields@citi.umich.edu> <1201303040-7779-9-git-send-email-bfields@citi.umich.edu> <1201303040-7779-10-git-send-email-bfields@citi.umich.edu> <1201303040-7779-11-git-send-email-bfields@citi.umich.edu> <1201303040-7779-12-git-send-email-bfields@citi.umich.edu> <1201303040-7779-13-git-send-email-bfields@citi.umich.edu> <1201303040-7779-14-git-send-email-bfields@citi.umich.edu> <1201303040-7779-15-git-send-email-bfields@citi.umich.edu> <1201303040-7779-16-git-send-email-bfields@citi.umich.edu> <1201303040-7779-17-git-send-email-bfields@citi.umich.edu> <1201303040-7779-18-git-send-email-bfields@citi.umich.edu> <1201303040-7779-19-git-send-email-bfields@citi.umich.edu> <1201303040-7779-20-git-send-email-bfields@citi.umich.edu> <1201303040-7779-21-git-send-email-bfields@citi.umich.edu> <1201303040-7779-22-git-send-email-bfields@citi.umich.edu> <1201303040-7779-23-git-send-email-bfields@citi.umich.edu> <1201303040-7779-24-git-send-email-bfields@citi.umich.edu> <1201303040-7779-25-git-send-email-bfields@citi.umich.edu> <1201303040-7779-26-git-send-email-bfields@citi.umich.edu> <1201303040-7779-27-git-send-email-bfields@citi.umich.edu> <1201303040-7779-28-git-send-email-bfields@citi.umich.edu> <1201303040-7779-29-git-send-email-bfields@citi.umich.edu> <1201303040-7779-30-git-send-email-bfields@citi.umich.edu> <1201303040-7779-31-git-send-email-bfields@citi.umich.edu> <1201303040-7779-32-git-send-email-bfields@citi.umich.edu> <1201303040-7779-33-git-send-email-bfields@citi.umich.edu> <1201303040-7779-34-git-send-email-bfields@citi.umich.edu> <1201303040-7779-35-git-send-email-bfields@citi.umich.edu> <1201303040-7779-36-git-send-email-bfields@citi.umich.edu> <1201303040-7779-37-git-send-email-bfields@citi.umich.edu> <1201303040-7779-38-git-send-email-bfields@citi.umich.edu> <1201303040-7779-39-git-send-email-bfields@citi.umich.edu> <1201303040-7779-40-git-send-email-bfields@citi.umich.edu> <1201303040-7779-41-git-send-email-bfields@citi.umich.edu> <1201303040-7779-42-git-send-email-bfields@citi.umich.edu> <1201303040-7779-43-git-send-email-bfields@citi.umich.edu> <1201303040-7779-44-git-send-email-bfields@citi.umich.edu> <1201303040-7779-45-git-send-email-bfields@citi.umich.edu> <1201303040-7779-46-git-send-email-bfields@citi.umich.edu> <1201303040-7779-47-git-send-email-bfields@citi.umich.edu> <1201303040-7779-48-git-send-email-bfields@citi.umich.edu> <1201303040-7779-49-git-send-email-bfields@citi.umich.edu> <1201303040-7779-50-git-send-email-bfields@citi.umich.edu> <1201303040-7779-51-git-send-email-bfields@citi.umich.edu> <1201303040-7779-52-git-send-email-bfields@citi.umich.edu> <1201303040-7779-53-git-send-email-bfields@citi.umich.edu> <1201303040-7779-54-git-send-email-bfields@citi.umich.edu> <1201303040-7779-55-git-send-email-bfields@citi.umich.edu> <1201303040-7779-56-git-send-email-bfields@citi.umich.edu> <1201303040-7779-57-git-send-email-bfields@citi.umich.edu> <1201303040-7779-58-git-send-email-bfields@citi.umich.edu> <1201303040-7779-59-git-send-email-bfields@citi.umich.edu> <1201303040-7779-60-git-send-email-bfields@citi.umich.edu> <1201303040-7779-61-git-send-email-bfields@citi.umich.edu> <1201303040-7779-62-git-send-email-bfields@citi.umich.edu> <1201303040-7779-63-git-send-email-bfields@citi.umich.edu> <1201303040-7779-64-git-send-email-bfields@citi.umich.edu> <1201303040-7779-65-git-send-email-bfields@citi.umich.edu> <1201303040-7779-66-git-send-email-bfields@citi.umich.edu> <1201303040-7779-67-git-send-email-bfields@citi.umich.edu> <1201303040-7779-68-git-send-email-bfields@citi.umich.edu> <1201303040-7779-69-git-send-email-bfields@citi.umich.edu> <1201303040-7779-70-git-send-email-bfields@citi.umich.edu> <1201303040-7779-71-git-send-email-bfields@citi.umich.edu> <1201303040-7779-72-git-send-email-bfields@citi.umich.edu> <1201303040-7779-73-git-send-email-bfields@citi.umich.edu> <1201303040-7779-74-git-send-email-bfields@citi.umich.edu> <1201303040-7779-75-git-send-email-bfields@citi.umich.edu> <1201303040-7779-76-git-send-email-bfields@citi.umich.edu> <1201303040-7779-77-git-send-email-bfields@citi.umich.edu> <1201303040-7779-78-git-send-email-bfields@citi.umich.edu> <1201303040-7779-79-git-send-email-bfields@citi.umich.edu> <1201303040-7779-80-git-send-email-bfields@citi.umich.edu> <1201303040-7779-81-git-send-email-bfields@citi.umich.edu> <1201303040-7779-82-git-send-email-bfields@citi.umich.edu> <1201303040-7779-83-git-send-email-bfields@citi.umich.edu> <1201303040-7779-84-git-send-email-bfields@citi.umich.edu> <1201303040-7779-85-git-send-email-bfields@citi.umich.edu> <1201303040-7779-86-git-send-email-bfields@citi.umich.edu> <1201303040-7779-87-git-send-email-bfields@citi.umich.edu> <1201303040-7779-88-git-send-email-bfields@citi.umich.edu> <1201303040-7779-89-git-send-email-bfields@citi.umich.edu> Cc: Tom Tucker , "J. Bruce Fields" To: linux-nfs@vger.kernel.org Return-path: Received: from mail.fieldses.org ([66.93.2.214]:47555 "EHLO fieldses.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1762192AbYAYXSh (ORCPT ); Fri, 25 Jan 2008 18:18:37 -0500 In-Reply-To: <1201303040-7779-89-git-send-email-bfields@citi.umich.edu> Sender: linux-nfs-owner@vger.kernel.org List-ID: From: Tom Tucker This file implements the RDMA transport recvfrom function. The function dequeues work reqeust completion contexts from an I/O list that it shares with the I/O tasklet in svc_rdma_transport.c. For ONCRPC RDMA, an RPC may not be complete when it is received. Instead, the RDMA header that precedes the RPC message informs the transport where to get the RPC data from on the client and where to place it in the RPC message before it is delivered to the server. The svc_rdma_recvfrom function therefore, parses this RDMA header and issues any necessary RDMA operations to fetch the remainder of the RPC from the client. Special handling is required when the request involves an RDMA_READ. In this case, recvfrom submits the RDMA_READ requests to the underlying transport driver and then returns 0. When the transport completes the last RDMA_READ for the request, it enqueues it on a read completion queue and enqueues the transport. The recvfrom code favors this queue over the regular DTO queue when satisfying reads. Signed-off-by: Tom Tucker Acked-by: Neil Brown Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 586 +++++++++++++++++++++++++++++++ 1 files changed, 586 insertions(+), 0 deletions(-) create mode 100644 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c new file mode 100644 index 0000000..300adb8 --- /dev/null +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c @@ -0,0 +1,586 @@ +/* + * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the BSD-type + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * Neither the name of the Network Appliance, Inc. nor the names of + * its contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Tom Tucker + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RPCDBG_FACILITY RPCDBG_SVCXPRT + +/* + * Replace the pages in the rq_argpages array with the pages from the SGE in + * the RDMA_RECV completion. The SGL should contain full pages up until the + * last one. + */ +static void rdma_build_arg_xdr(struct svc_rqst *rqstp, + struct svc_rdma_op_ctxt *ctxt, + u32 byte_count) +{ + struct page *page; + u32 bc; + int sge_no; + + /* Swap the page in the SGE with the page in argpages */ + page = ctxt->pages[0]; + put_page(rqstp->rq_pages[0]); + rqstp->rq_pages[0] = page; + + /* Set up the XDR head */ + rqstp->rq_arg.head[0].iov_base = page_address(page); + rqstp->rq_arg.head[0].iov_len = min(byte_count, ctxt->sge[0].length); + rqstp->rq_arg.len = byte_count; + rqstp->rq_arg.buflen = byte_count; + + /* Compute bytes past head in the SGL */ + bc = byte_count - rqstp->rq_arg.head[0].iov_len; + + /* If data remains, store it in the pagelist */ + rqstp->rq_arg.page_len = bc; + rqstp->rq_arg.page_base = 0; + rqstp->rq_arg.pages = &rqstp->rq_pages[1]; + sge_no = 1; + while (bc && sge_no < ctxt->count) { + page = ctxt->pages[sge_no]; + put_page(rqstp->rq_pages[sge_no]); + rqstp->rq_pages[sge_no] = page; + bc -= min(bc, ctxt->sge[sge_no].length); + rqstp->rq_arg.buflen += ctxt->sge[sge_no].length; + sge_no++; + } + rqstp->rq_respages = &rqstp->rq_pages[sge_no]; + + /* We should never run out of SGE because the limit is defined to + * support the max allowed RPC data length + */ + BUG_ON(bc && (sge_no == ctxt->count)); + BUG_ON((rqstp->rq_arg.head[0].iov_len + rqstp->rq_arg.page_len) + != byte_count); + BUG_ON(rqstp->rq_arg.len != byte_count); + + /* If not all pages were used from the SGL, free the remaining ones */ + bc = sge_no; + while (sge_no < ctxt->count) { + page = ctxt->pages[sge_no++]; + put_page(page); + } + ctxt->count = bc; + + /* Set up tail */ + rqstp->rq_arg.tail[0].iov_base = NULL; + rqstp->rq_arg.tail[0].iov_len = 0; +} + +struct chunk_sge { + int start; /* sge no for this chunk */ + int count; /* sge count for this chunk */ +}; + +/* Encode a read-chunk-list as an array of IB SGE + * + * Assumptions: + * - chunk[0]->position points to pages[0] at an offset of 0 + * - pages[] is not physically or virtually contigous and consists of + * PAGE_SIZE elements. + * + * Output: + * - sge array pointing into pages[] array. + * - chunk_sge array specifying sge index and count for each + * chunk in the read list + * + */ +static int rdma_rcl_to_sge(struct svcxprt_rdma *xprt, + struct svc_rqst *rqstp, + struct svc_rdma_op_ctxt *head, + struct rpcrdma_msg *rmsgp, + struct ib_sge *sge, + struct chunk_sge *ch_sge_ary, + int ch_count, + int byte_count) +{ + int sge_no; + int sge_bytes; + int page_off; + int page_no; + int ch_bytes; + int ch_no; + struct rpcrdma_read_chunk *ch; + + sge_no = 0; + page_no = 0; + page_off = 0; + ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0]; + ch_no = 0; + ch_bytes = ch->rc_target.rs_length; + head->arg.head[0] = rqstp->rq_arg.head[0]; + head->arg.tail[0] = rqstp->rq_arg.tail[0]; + head->arg.pages = &head->pages[head->count]; + head->sge[0].length = head->count; /* save count of hdr pages */ + head->arg.page_base = 0; + head->arg.page_len = ch_bytes; + head->arg.len = rqstp->rq_arg.len + ch_bytes; + head->arg.buflen = rqstp->rq_arg.buflen + ch_bytes; + head->count++; + ch_sge_ary[0].start = 0; + while (byte_count) { + sge_bytes = min_t(int, PAGE_SIZE-page_off, ch_bytes); + sge[sge_no].addr = + ib_dma_map_page(xprt->sc_cm_id->device, + rqstp->rq_arg.pages[page_no], + page_off, sge_bytes, + DMA_FROM_DEVICE); + sge[sge_no].length = sge_bytes; + sge[sge_no].lkey = xprt->sc_phys_mr->lkey; + /* + * Don't bump head->count here because the same page + * may be used by multiple SGE. + */ + head->arg.pages[page_no] = rqstp->rq_arg.pages[page_no]; + rqstp->rq_respages = &rqstp->rq_arg.pages[page_no+1]; + + byte_count -= sge_bytes; + ch_bytes -= sge_bytes; + sge_no++; + /* + * If all bytes for this chunk have been mapped to an + * SGE, move to the next SGE + */ + if (ch_bytes == 0) { + ch_sge_ary[ch_no].count = + sge_no - ch_sge_ary[ch_no].start; + ch_no++; + ch++; + ch_sge_ary[ch_no].start = sge_no; + ch_bytes = ch->rc_target.rs_length; + /* If bytes remaining account for next chunk */ + if (byte_count) { + head->arg.page_len += ch_bytes; + head->arg.len += ch_bytes; + head->arg.buflen += ch_bytes; + } + } + /* + * If this SGE consumed all of the page, move to the + * next page + */ + if ((sge_bytes + page_off) == PAGE_SIZE) { + page_no++; + page_off = 0; + /* + * If there are still bytes left to map, bump + * the page count + */ + if (byte_count) + head->count++; + } else + page_off += sge_bytes; + } + BUG_ON(byte_count != 0); + return sge_no; +} + +static void rdma_set_ctxt_sge(struct svc_rdma_op_ctxt *ctxt, + struct ib_sge *sge, + u64 *sgl_offset, + int count) +{ + int i; + + ctxt->count = count; + for (i = 0; i < count; i++) { + ctxt->sge[i].addr = sge[i].addr; + ctxt->sge[i].length = sge[i].length; + *sgl_offset = *sgl_offset + sge[i].length; + } +} + +static int rdma_read_max_sge(struct svcxprt_rdma *xprt, int sge_count) +{ +#ifdef RDMA_TRANSPORT_IWARP + if ((RDMA_TRANSPORT_IWARP == + rdma_node_get_transport(xprt->sc_cm_id-> + device->node_type)) + && sge_count > 1) + return 1; + else +#endif + return min_t(int, sge_count, xprt->sc_max_sge); +} + +/* + * Use RDMA_READ to read data from the advertised client buffer into the + * XDR stream starting at rq_arg.head[0].iov_base. + * Each chunk in the array + * contains the following fields: + * discrim - '1', This isn't used for data placement + * position - The xdr stream offset (the same for every chunk) + * handle - RMR for client memory region + * length - data transfer length + * offset - 64 bit tagged offset in remote memory region + * + * On our side, we need to read into a pagelist. The first page immediately + * follows the RPC header. + * + * This function returns 1 to indicate success. The data is not yet in + * the pagelist and therefore the RPC request must be deferred. The + * I/O completion will enqueue the transport again and + * svc_rdma_recvfrom will complete the request. + * + * NOTE: The ctxt must not be touched after the last WR has been posted + * because the I/O completion processing may occur on another + * processor and free / modify the context. Ne touche pas! + */ +static int rdma_read_xdr(struct svcxprt_rdma *xprt, + struct rpcrdma_msg *rmsgp, + struct svc_rqst *rqstp, + struct svc_rdma_op_ctxt *hdr_ctxt) +{ + struct ib_send_wr read_wr; + int err = 0; + int ch_no; + struct ib_sge *sge; + int ch_count; + int byte_count; + int sge_count; + u64 sgl_offset; + struct rpcrdma_read_chunk *ch; + struct svc_rdma_op_ctxt *ctxt = NULL; + struct svc_rdma_op_ctxt *head; + struct svc_rdma_op_ctxt *tmp_sge_ctxt; + struct svc_rdma_op_ctxt *tmp_ch_ctxt; + struct chunk_sge *ch_sge_ary; + + /* If no read list is present, return 0 */ + ch = svc_rdma_get_read_chunk(rmsgp); + if (!ch) + return 0; + + /* Allocate temporary contexts to keep SGE */ + BUG_ON(sizeof(struct ib_sge) < sizeof(struct chunk_sge)); + tmp_sge_ctxt = svc_rdma_get_context(xprt); + sge = tmp_sge_ctxt->sge; + tmp_ch_ctxt = svc_rdma_get_context(xprt); + ch_sge_ary = (struct chunk_sge *)tmp_ch_ctxt->sge; + + svc_rdma_rcl_chunk_counts(ch, &ch_count, &byte_count); + sge_count = rdma_rcl_to_sge(xprt, rqstp, hdr_ctxt, rmsgp, + sge, ch_sge_ary, + ch_count, byte_count); + head = svc_rdma_get_context(xprt); + sgl_offset = 0; + ch_no = 0; + + for (ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0]; + ch->rc_discrim != 0; ch++, ch_no++) { + next_sge: + if (!ctxt) + ctxt = head; + else { + ctxt->next = svc_rdma_get_context(xprt); + ctxt = ctxt->next; + } + ctxt->next = NULL; + ctxt->direction = DMA_FROM_DEVICE; + clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags); + clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags); + if ((ch+1)->rc_discrim == 0) { + /* + * Checked in sq_cq_reap to see if we need to + * be enqueued + */ + set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags); + ctxt->next = hdr_ctxt; + hdr_ctxt->next = head; + } + + /* Prepare READ WR */ + memset(&read_wr, 0, sizeof read_wr); + ctxt->wr_op = IB_WR_RDMA_READ; + read_wr.wr_id = (unsigned long)ctxt; + read_wr.opcode = IB_WR_RDMA_READ; + read_wr.send_flags = IB_SEND_SIGNALED; + read_wr.wr.rdma.rkey = ch->rc_target.rs_handle; + read_wr.wr.rdma.remote_addr = + get_unaligned(&(ch->rc_target.rs_offset)) + + sgl_offset; + read_wr.sg_list = &sge[ch_sge_ary[ch_no].start]; + read_wr.num_sge = + rdma_read_max_sge(xprt, ch_sge_ary[ch_no].count); + rdma_set_ctxt_sge(ctxt, &sge[ch_sge_ary[ch_no].start], + &sgl_offset, + read_wr.num_sge); + + /* Post the read */ + err = svc_rdma_send(xprt, &read_wr); + if (err) { + printk(KERN_ERR "svcrdma: Error posting send = %d\n", + err); + /* + * Break the circular list so free knows when + * to stop if the error happened to occur on + * the last read + */ + ctxt->next = NULL; + goto out; + } + atomic_inc(&rdma_stat_read); + + if (read_wr.num_sge < ch_sge_ary[ch_no].count) { + ch_sge_ary[ch_no].count -= read_wr.num_sge; + ch_sge_ary[ch_no].start += read_wr.num_sge; + goto next_sge; + } + sgl_offset = 0; + err = 0; + } + + out: + svc_rdma_put_context(tmp_sge_ctxt, 0); + svc_rdma_put_context(tmp_ch_ctxt, 0); + + /* Detach arg pages. svc_recv will replenish them */ + for (ch_no = 0; &rqstp->rq_pages[ch_no] < rqstp->rq_respages; ch_no++) + rqstp->rq_pages[ch_no] = NULL; + + /* + * Detach res pages. svc_release must see a resused count of + * zero or it will attempt to put them. + */ + while (rqstp->rq_resused) + rqstp->rq_respages[--rqstp->rq_resused] = NULL; + + if (err) { + printk(KERN_ERR "svcrdma : RDMA_READ error = %d\n", err); + set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags); + /* Free the linked list of read contexts */ + while (head != NULL) { + ctxt = head->next; + svc_rdma_put_context(head, 1); + head = ctxt; + } + return 0; + } + + return 1; +} + +static int rdma_read_complete(struct svc_rqst *rqstp, + struct svc_rdma_op_ctxt *data) +{ + struct svc_rdma_op_ctxt *head = data->next; + int page_no; + int ret; + + BUG_ON(!head); + + /* Copy RPC pages */ + for (page_no = 0; page_no < head->count; page_no++) { + put_page(rqstp->rq_pages[page_no]); + rqstp->rq_pages[page_no] = head->pages[page_no]; + } + /* Point rq_arg.pages past header */ + rqstp->rq_arg.pages = &rqstp->rq_pages[head->sge[0].length]; + rqstp->rq_arg.page_len = head->arg.page_len; + rqstp->rq_arg.page_base = head->arg.page_base; + + /* rq_respages starts after the last arg page */ + rqstp->rq_respages = &rqstp->rq_arg.pages[page_no]; + rqstp->rq_resused = 0; + + /* Rebuild rq_arg head and tail. */ + rqstp->rq_arg.head[0] = head->arg.head[0]; + rqstp->rq_arg.tail[0] = head->arg.tail[0]; + rqstp->rq_arg.len = head->arg.len; + rqstp->rq_arg.buflen = head->arg.buflen; + + /* XXX: What should this be? */ + rqstp->rq_prot = IPPROTO_MAX; + + /* + * Free the contexts we used to build the RDMA_READ. We have + * to be careful here because the context list uses the same + * next pointer used to chain the contexts associated with the + * RDMA_READ + */ + data->next = NULL; /* terminate circular list */ + do { + data = head->next; + svc_rdma_put_context(head, 0); + head = data; + } while (head != NULL); + + ret = rqstp->rq_arg.head[0].iov_len + + rqstp->rq_arg.page_len + + rqstp->rq_arg.tail[0].iov_len; + dprintk("svcrdma: deferred read ret=%d, rq_arg.len =%d, " + "rq_arg.head[0].iov_base=%p, rq_arg.head[0].iov_len = %zd\n", + ret, rqstp->rq_arg.len, rqstp->rq_arg.head[0].iov_base, + rqstp->rq_arg.head[0].iov_len); + + /* Indicate that we've consumed an RQ credit */ + rqstp->rq_xprt_ctxt = rqstp->rq_xprt; + svc_xprt_received(rqstp->rq_xprt); + return ret; +} + +/* + * Set up the rqstp thread context to point to the RQ buffer. If + * necessary, pull additional data from the client with an RDMA_READ + * request. + */ +int svc_rdma_recvfrom(struct svc_rqst *rqstp) +{ + struct svc_xprt *xprt = rqstp->rq_xprt; + struct svcxprt_rdma *rdma_xprt = + container_of(xprt, struct svcxprt_rdma, sc_xprt); + struct svc_rdma_op_ctxt *ctxt = NULL; + struct rpcrdma_msg *rmsgp; + int ret = 0; + int len; + + dprintk("svcrdma: rqstp=%p\n", rqstp); + + /* + * The rq_xprt_ctxt indicates if we've consumed an RQ credit + * or not. It is used in the rdma xpo_release_rqst function to + * determine whether or not to return an RQ WQE to the RQ. + */ + rqstp->rq_xprt_ctxt = NULL; + + spin_lock_bh(&rdma_xprt->sc_read_complete_lock); + if (!list_empty(&rdma_xprt->sc_read_complete_q)) { + ctxt = list_entry(rdma_xprt->sc_read_complete_q.next, + struct svc_rdma_op_ctxt, + dto_q); + list_del_init(&ctxt->dto_q); + } + spin_unlock_bh(&rdma_xprt->sc_read_complete_lock); + if (ctxt) + return rdma_read_complete(rqstp, ctxt); + + spin_lock_bh(&rdma_xprt->sc_rq_dto_lock); + if (!list_empty(&rdma_xprt->sc_rq_dto_q)) { + ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next, + struct svc_rdma_op_ctxt, + dto_q); + list_del_init(&ctxt->dto_q); + } else { + atomic_inc(&rdma_stat_rq_starve); + clear_bit(XPT_DATA, &xprt->xpt_flags); + ctxt = NULL; + } + spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock); + if (!ctxt) { + /* This is the EAGAIN path. The svc_recv routine will + * return -EAGAIN, the nfsd thread will go to call into + * svc_recv again and we shouldn't be on the active + * transport list + */ + if (test_bit(XPT_CLOSE, &xprt->xpt_flags)) + goto close_out; + + BUG_ON(ret); + goto out; + } + dprintk("svcrdma: processing ctxt=%p on xprt=%p, rqstp=%p, status=%d\n", + ctxt, rdma_xprt, rqstp, ctxt->wc_status); + BUG_ON(ctxt->wc_status != IB_WC_SUCCESS); + atomic_inc(&rdma_stat_recv); + + /* Build up the XDR from the receive buffers. */ + rdma_build_arg_xdr(rqstp, ctxt, ctxt->byte_len); + + /* Decode the RDMA header. */ + len = svc_rdma_xdr_decode_req(&rmsgp, rqstp); + rqstp->rq_xprt_hlen = len; + + /* If the request is invalid, reply with an error */ + if (len < 0) { + if (len == -ENOSYS) + (void)svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS); + goto close_out; + } + + /* Read read-list data. If we would need to wait, defer + * it. Not that in this case, we don't return the RQ credit + * until after the read completes. + */ + if (rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt)) { + svc_xprt_received(xprt); + return 0; + } + + /* Indicate we've consumed an RQ credit */ + rqstp->rq_xprt_ctxt = rqstp->rq_xprt; + + ret = rqstp->rq_arg.head[0].iov_len + + rqstp->rq_arg.page_len + + rqstp->rq_arg.tail[0].iov_len; + svc_rdma_put_context(ctxt, 0); + out: + dprintk("svcrdma: ret = %d, rq_arg.len =%d, " + "rq_arg.head[0].iov_base=%p, rq_arg.head[0].iov_len = %zd\n", + ret, rqstp->rq_arg.len, + rqstp->rq_arg.head[0].iov_base, + rqstp->rq_arg.head[0].iov_len); + rqstp->rq_prot = IPPROTO_MAX; + svc_xprt_copy_addrs(rqstp, xprt); + svc_xprt_received(xprt); + return ret; + + close_out: + if (ctxt) { + svc_rdma_put_context(ctxt, 1); + /* Indicate we've consumed an RQ credit */ + rqstp->rq_xprt_ctxt = rqstp->rq_xprt; + } + dprintk("svcrdma: transport %p is closing\n", xprt); + /* + * Set the close bit and enqueue it. svc_recv will see the + * close bit and call svc_xprt_delete + */ + set_bit(XPT_CLOSE, &xprt->xpt_flags); + svc_xprt_received(xprt); + return 0; +} -- 1.5.4.rc2.60.gb2e62