From: "Weathers, Norman R." Subject: RE: [Bug] NFSv4 fails to work without ipv6 kernel module Date: Tue, 28 Apr 2009 13:50:11 -0500 Message-ID: <0122F800A3B64C449565A9E8C297701005E6DE1A@hoexmb9.conoco.net> References: <200904271903.36379.bircoph@gmail.com> <1810FE6E-D2AF-4ED3-BE34-F6117A8D9B46@oracle.com> <200904280444.00206.bircoph@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Cc: To: "Chuck Lever" , "Andrew Savchenko" Return-path: Received: from mailman1.ppco.com ([138.32.41.4]:52527 "EHLO mailman1.ppco.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754122AbZD1TGY convert rfc822-to-8bit (ORCPT ); Tue, 28 Apr 2009 15:06:24 -0400 Received: from bvlextrd1.conoco.net (bvlextrd1.conoco.net [138.32.41.12]) by mailman1.ppco.com (Switch-3.3.0/Switch-3.2.7) with ESMTP id n3SIpkdN032478 for ; Tue, 28 Apr 2009 13:51:47 -0500 In-Reply-To: Sender: linux-nfs-owner@vger.kernel.org List-ID: I, too, have seen this just this last weekend. I have a vanilla 2.6.29.1 kernel on Fedora 10, and I compiled it with IPV4 and IPV6, plus NFSv3 and NFSv4, plus the new rpcbind 4 support. With IPV6 blacklisted, NFSv3 would not mount. It had the same error message as Andrew "mount.nfs: Address family not supported by protocol". Once I whitelisted IPV6, NFS would mount. Unfortunately, this is not a good situation for me because IPV6 plays havoc with my network for some reason (darn cheap Linksys router probably). I went back and turned off the RPCBind v4 and recompiled the NFS modules, and now I can blacklist IPV6 and my NFSv3 works fine. It is a strange problem. My server, a Fedora 10 box, showed that it was authenticating the mount request fine... Norman Weathers > -----Original Message----- > From: linux-nfs-owner@vger.kernel.org > [mailto:linux-nfs-owner@vger.kernel.org] On Behalf Of Chuck Lever > Sent: Tuesday, April 28, 2009 11:17 AM > To: Andrew Savchenko > Cc: linux-nfs@vger.kernel.org > Subject: Re: [Bug] NFSv4 fails to work without ipv6 kernel module > > On Apr 27, 2009, at 8:43 PM, Andrew Savchenko wrote: > > Hello, > > > > On Monday 27 April 2009, Chuck Lever wrote: > >> On Apr 27, 2009, at 11:03 AM, Andrew Savchenko wrote: > >>> Hello, > >>> > >>> I have ipv6 support as a module (it may be needed in the > >>> recent future), but currently I want ipv6 to be disabled on my > >>> system, so I blacklisted this module. And here problems > >>> begin... > >>> > >>> NFSv3 works flawlessly: > >>> # mount 172.19.0.1:/home/ftp /mnt/nfs/ > >>> > >>> but NFSv4 fails: > >>> # mount -t nfs4 172.19.0.1:/ /mnt/nfs/ > >>> mount.nfs4: Cannot allocate memory > >>> > >>> After modprobe ipv6 it works: > >>> # mount -t nfs4 172.19.0.1:/ /mnt/nfs/ > >>> > >>> I recompiled nfs-utils without ipv6 support, but this doesn't > >>> help. > >>> > >>> Here is my /etc/exports: > >>> /home/ftp 172.16.0.0/12 > >>> (ro,async,crossmnt,no_subtree_check,fsid=0,all_squash) \ > >>> 127.0.0.1/32 > >>> (ro,async,crossmnt,no_subtree_check,fsid=0,all_squash) > >>> > >>> I use nfs-utils-1.1.5, I tested this on both vanilla linux > >>> kernels 2.6.28.7 and 2.6.28.9. > >> > >> Have you tried this with 2.6.29? > > > > I just tried with vanilla 2.6.29.1. Things became even worse. Now > > not only NFSv4 fails to mount as usual, but NFSv3 fails too: > > > > # mount 172.19.0.1:/home/ftp /mnt/orionis > > mount.nfs: Address family not supported by protocol > > > > And following error appears in kernel log multiple times: > > RPC: failed to contact local rpcbind server (errno 5). > > > > I attached strace -f for both mount attempts. The problem is in > > mount() syscall in both cases, thus somewhere inside the kernel... > > > > With ipv6 module loaded all works fine. > > Right, this isn't an nfs-utils problem, it's an issue in the kernel > (so the strace isn't terribly informative). 2.6.29 is supposed to > have addressed this problem, but maybe you are hitting a new > way that > not having ipv6.ko loaded is buggering us. > > If you're building these kernels yourself, why not disable > CONFIG_IPV6? > > >> You can also try building 2.6.28 with CONFIG_SUNRPC_REGISTER_V4 > >> disabled. > > > > With this option disabled errno 5 (see above) disappeared from > > logs, but mount fails with the same errors. Yet again, with ipv6 > > module loaded it works ok. > > I can't reproduce here on 2.6.30-rc2, so it may be just an > issue with > 2.6.29. You can enable debug printks to see what the kernel > thinks is > going on. Try this as root: > > # rpcdebug -m nfs -s mount > # mount .... > # rpcdebug -m nfs -c > > Then look in your kernel log. "rpcdebug -vh" will list the full set > of flags you can enable. > > Since rpcbind also seems to be an issue, you can try this also: > > # rpcdebug -m rpc -s bind > # mount .... > # rpcdebug -m rpc -c > > What type of server are you attempting to mount? Linux? Solaris? > > -- > Chuck Lever > chuck[dot]lever[at]oracle[dot]com > -- > To unsubscribe from this list: send the line "unsubscribe > linux-nfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >