From: Shehjar Tikoo <shehjart-+FkPdpiNhgJBDgjK7y7TUQ@public.gmane.org>
Subject: Re: Linux client mount fails with Gluster NFSv3 server
Date: Tue, 01 Sep 2009 12:09:02 +0530
Message-ID: <4A9CC186.10504@gluster.com>
References: <4A9BD90B.4090804@gluster.com> <1251738771.5144.21.camel@heimdal.trondhjem.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Cc: Linux NFS Mailing List <linux-nfs@vger.kernel.org>,
	"J. Bruce Fields" <bfields@fieldses.org>
To: Trond Myklebust <trond.myklebust@fys.uio.no>
Return-path: <linux-nfs-owner@vger.kernel.org>
Received: from saturn.datasyncintra.net ([208.88.241.29]:42453 "EHLO
	saturn.datasyncintra.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751501AbZIAGe6 (ORCPT
	<rfc822;linux-nfs@vger.kernel.org>); Tue, 1 Sep 2009 02:34:58 -0400
In-Reply-To: <1251738771.5144.21.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
Sender: linux-nfs-owner@vger.kernel.org
List-ID: <linux-nfs.vger.kernel.org>

Trond Myklebust wrote:
> On Mon, 2009-08-31 at 19:37 +0530, Shehjar Tikoo wrote:
>> Hi All
>>
>> I am writing a NFSv3 server as part of the Gluster clustered FS.
>> To start with, I've implemented the Mountv3 protocol and am just
>> starting out with NFSv3. In NFSv3, the first thing I've implemented
>> is the FSINFO and GETATTR calls to support mounting with NFS client.
>>
>> The problem I am facing is this. The Linux NFS client fails to mount
>> the remote export even though it is successfully receiving the file
>> handle from the MNT request and the result of the FSINFO call. This
>> is shown in the attached pcap file, which would be best viewed through
>> wireshark with "rpc" as the display filter.
>>
>> The command line output is shown below:
>>
>> root@indus:statcache# mount 127.0.0.1:/pos1 /mnt -o noacl,nolock
>> mount.nfs: mounting 127.0.0.1:/pos1 failed, reason given by server:
>>    No such file or directory
>>
>> This happens even though, we're told the following by showmount.
>> root@indus:statcache# showmount -e
>> Export list for indus:
>> /pos1 (everyone)
>> /pos2 (everyone)
>> /pos3 (everyone)
>> /pos4 (everyone)
>> root@indus:statcache#
>>
>> ..where /pos1, /pos2, etc are exports from the locally running Gluster
>> NFS server.
>>
>> As you'll notice in the trace, there is no NFSv3 request after
>> the FSINFO, so I've a feeling it could be that some field in the
>> FSINFO reply is not what the Linux NFS client is expecting. Could that
>> be the reason for the mount failure?
>>
>> What else should I be looking into to investigate this further?
>>
>> The client is a 2.6.18-5 kernel supplied with Debian on an AMD64 box.
>> nfs-utils is version 1.1.4.
>>
>> Many thanks,
>> -Shehjar
> 
> Wireshark fails to decode your server's reply too. I'd start looking
> there...
> 

Bruce, Trond,

I am able to view the packets just fine using wireshark Version 1.0.6.
It is possible that the default options for you for TCP and RPC are
not same as the ones below.
Could you please try viewing the dump with the following options set 
in the wireshark Protocol preferences pane.

Press <Ctrl> + <Shift> + p to bring up the protocol preferences
window.

First, expand the "Protocol" section header in the window that pops
up. Then look for "TCP" section. In the TCP section, please check the 
following option:

"Allow subdissector to reassemble TCP streams"

Then, search for the "RPC" section under "Protocols". For RPC, please
check the following option:

"Reassemble RPC over TCP message spanning multiple TCP segments"

This should make the RPC records visible properly.

Thanks
Shehjar


> Cheers
>   Trond
>