Return-Path: linux-nfs-owner@vger.kernel.org Received: from mx2.netapp.com ([216.240.18.37]:23881 "EHLO mx2.netapp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932282Ab2FAVPM (ORCPT ); Fri, 1 Jun 2012 17:15:12 -0400 From: andros@netapp.com To: iisaman@netapp.com Cc: linux-nfs@vger.kernel.org, Weston Andros Adamson Subject: [[PATCH resend] 3/6] PYNFS use loopback addresses for MDS<->DS communication Date: Tue, 29 May 2012 18:11:26 -0400 Message-Id: <1338329489-29178-4-git-send-email-andros@netapp.com> In-Reply-To: <1338329489-29178-1-git-send-email-andros@netapp.com> References: <1338329489-29178-1-git-send-email-andros@netapp.com> Sender: linux-nfs-owner@vger.kernel.org List-ID: From: Weston Andros Adamson if a loopback addresses is specified for a DS, use that address for MDS to DS communication and remove it from the advertised addresses in getdeviceinfo (it obviously would never work). this is useful for testing network partitions - you can bring down / firewall off an interface without breaking MDS<->DS communications. an example dataservers.conf: 192.168.55.1:12345,127.0.0.1:12345/pynfs_mds 192.168.55.1:12346,127.0.0.1:12346/pynfs_mds Signed-off-by: Weston Andros Adamson --- nfs4.1/dataserver.py | 28 ++++++++++++++++++++++------ 1 files changed, 22 insertions(+), 6 deletions(-) diff --git a/nfs4.1/dataserver.py b/nfs4.1/dataserver.py index 65e4f55..dd2a535 100644 --- a/nfs4.1/dataserver.py +++ b/nfs4.1/dataserver.py @@ -187,9 +187,27 @@ class DSDevice(object): log.critical("Could not parse line: %r" % line) sys.exit(1) - # for now, just use the last path for local connections - server, port = server_list[-1] - server_list = server_list[:-1] + # if there is a (IPv4) loopback address in the multipath list, + # use that as the connection to the DS, but dont advertise it + loopback_idx = -1 + for i, serverport in enumerate(server_list): + if serverport[0] == '127.0.0.1': + loopback_idx = i + break + + if loopback_idx >= 0: + print "Using loopback address for MDS->DS communication only" + server_list = list(server_list) + server, port = server_list.pop(loopback_idx) + else: + # just use the last path for local connections + server, port = server_list[-1] + + if not server_list: + log.critical("At least one non-loopback address must " + + "be specified for each DS") + sys.exit(1) + print server, port, path try: log.info("Adding dataserver ip:%s port:%s path:%s" % @@ -210,9 +228,7 @@ class DSDevice(object): index = 0 for d in self.list: if d.active: - multipath = [] - multipath.extend(d.get_multipath_netaddr4s()) - multipath.append(d.get_netaddr4()) + multipath = d.get_multipath_netaddr4s() netaddrs.append(multipath) stripe_indices.append(index) index = index + 1 -- 1.7.7.6