Return-Path: Received: from mailsrv.ikr.uni-stuttgart.de ([129.69.170.2]:38510 "EHLO mailsrv.ikr.uni-stuttgart.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726421AbeIBX1b (ORCPT ); Sun, 2 Sep 2018 19:27:31 -0400 Received: from netsrv1.ikr.uni-stuttgart.de (netsrv1-c [10.11.12.12]) by mailsrv.ikr.uni-stuttgart.de (Postfix) with ESMTP id 2469719C002D for ; Sun, 2 Sep 2018 21:01:49 +0200 (CEST) Received: from ikr.uni-stuttgart.de (ingress2-c [10.11.14.11]) by netsrv1.ikr.uni-stuttgart.de (Postfix) with SMTP id 0F7F81A200AE for ; Sun, 2 Sep 2018 21:01:49 +0200 (CEST) From: Ulrich Gemkow To: linux-nfs@vger.kernel.org Subject: conflicting requirements betweenn rpc.rquotad and nfs services Date: Sun, 2 Sep 2018 21:01:47 +0200 MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Message-Id: <201809022101.49019.ulrich.gemkow@ikr.uni-stuttgart.de> Sender: linux-nfs-owner@vger.kernel.org List-ID: Hello, we updated to Ubuntu 18.04 on our servers and encounter the following new problem: We have no IPv6 interfaces/adresses configured and rpc.rquotad complains about this and refuses to start - it seems the libtirpc has IPv6 as a requirement when listed in /etc/netconfig. When commenting out the v6-related lines in /etc/netconfig, rpc.rquotad starts. But without the IPv6 related lines in /etc/netconfig rpcbind no longer starts and emits error messages which seems a little bit weired. The services start when we start rpc.rquotad with the v6-lines in /etc/netconfig commented out and using the original version with the other services. Is it intended that rpcbind does not start when /etc/netconfig does not contain the IPv6-lines? Is there a reason for this? rpc.rquotad --version says Quota utilities version 4.03. Compiled with: USE_LDAP_MAIL_LOOKUP EXT2_DIRECT HOSTS_ACCESS RPC RPC_SETQUOTA BSD_BEHAVIOUR rpcbind seems to emit no version information Thanks in advance and best regards -Ulrich -- Ulrich Gemkow University of Stuttgart Institute of Communication Networks and Computer Engineering (IKR)