Return-Path: <bluez-devel-admin@lists.sourceforge.net>
From: Marcel Holtmann <marcel@rvs.uni-bielefeld.de>
To: BlueZ Mailing List <bluez-devel@lists.sourceforge.net>
Content-Type: text/plain
Message-Id: <1052870730.4609.31.camel@pegasus.local>
Mime-Version: 1.0
Subject: [Bluez-devel] RFCOMM server problem
Sender: bluez-devel-admin@lists.sourceforge.net
Errors-To: bluez-devel-admin@lists.sourceforge.net
List-Help: <mailto:bluez-devel-request@lists.sourceforge.net?subject=help>
List-Post: <mailto:bluez-devel@lists.sourceforge.net>
List-Subscribe: <https://lists.sourceforge.net/lists/listinfo/bluez-devel>,
	<mailto:bluez-devel-request@lists.sourceforge.net?subject=subscribe>
List-Id: <bluez-devel.lists.sourceforge.net>
List-Unsubscribe: 
	<https://lists.sourceforge.net/lists/listinfo/bluez-devel>,
	<mailto:bluez-devel-request@lists.sourceforge.net?subject=unsubscribe>
List-Archive: 
	<http://sourceforge.net/mailarchive/forum.php?forum=bluez-devel>
Date: 14 May 2003 02:05:24 +0200

Hi Max,

if I set up a RFCOMM server on a 2.4.20-mh7 (plus all new patches) and
try to connect from another machine which runs 2.4.20-mh6, the
communications stops after the initial SABM for dlci 0. The server
didn't send the UA for this dlci. The connection establishment fails
because of the timeout. If I don't start the server and try to establish
the connection I see the UA for dlci 0. If I change the direction and
put the server on the machine with the older kernel all is working fine.

Any idea what is going wrong?

Regards

Marcel




-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel