Return-Path: Subject: Re: [Bluez-devel] Digianswer USB driver From: Marcel Holtmann To: "Jan J. Jessen" Cc: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1064307381.26572.162.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Date: 23 Sep 2003 10:56:15 +0200 Hi Jan, > Works perfect:-) At first hciconfig hci0 up gave an error saying that it > couldn't set scan mode. Working with these cards for more than a year, I > know that they sometimes don't reply with the event they are supposed to, > so I just tried again, and everything is OK Bluetooth:-) these are good news. Your initial problem setting scan mode can only be solved with a USB sniffer, I think. Do you have any H:2 USB Bluetooth devices? If yes, please attach them along with a Digianswer one to the same host and use them both. I want to make sure that a Digianswer device works in conjunction with a H:2 device. > # hciconfig -a > hci0: Type: USB > BD Address: 00:50:CD:00:42:2B ACL MTU: 384:6 SCO MTU: 32:7 > UP RUNNING > RX bytes:58747 acl:0 sco:0 events:6 errors:0 > TX bytes:27 acl:0 sco:0 commands:7 errors:0 > Features: 0xff 0xfa 0x21 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: > Link mode: SLAVE ACCEPT > Name: '' > Class: 0x000000 > Service Classes: Unspecified > Device Class: Miscellaneous, > HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x37 > Manufacturer: Motorola (8) Have you ever updated the firmware of the Digianswer device? I though that Digianswer already had a USB device at the time they are not a subsidiary of Motorola. So the manufacturer should be 12. > I hope this is all the information that you need. It shure will easy my > explanations to students here at the university that wants to use these > devices, that they can just use bluez from now on. Please do my test above and send me "hciconfig -a" of a machine with two different dongles. If this works I apply this patch to mainline and your students can start working with BlueZ very easy ;) > Since Digianswer is a subsidiary of Motorola one could imagine that if > Motorola once made a Bluetooth USB dongle, Bluez would work perfectly > with it - just a thouhgt. Do you have any contact to Motorola, so I can get one of these devices? Regards Marcel ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel