Return-Path: Subject: Re: [Bluez-devel] sco / csr final notes From: Marcel Holtmann To: James Courtier-Dutton Cc: Steven Singer , BlueZ Mailing List In-Reply-To: <406B17A4.8000607@superbug.demon.co.uk> References: <406A9E23.9000406@soft.uni-linz.ac.at> <1080730774.2674.6.camel@pegasus> <406AAFFF.6040504@soft.uni-linz.ac.at> <406ADF3E.4020502@csr.com> <406AE027.7030000@soft.uni-linz.ac.at> <406AF150.8080105@csr.com> <406B17A4.8000607@superbug.demon.co.uk> Content-Type: text/plain Message-Id: <1080761775.2536.3.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 31 Mar 2004 21:36:15 +0200 Hi James, > Just out of interest, how does one upgrade the firmware on a USB device > using a CSR chip ? > > I have this device: - > > bash-2.05b# hciconfig hci0 version > hci0: Type: USB > BD Address: 00:A0:96:1F:42:BF ACL MTU: 192:8 SCO MTU: 64:8 > HCI Ver: 1.1 (0x1) HCI Rev: 0x135 LMP Ver: 1.1 (0x1) LMP > Subver: 0x135 > Manufacturer: Cambridge Silicon Radio (10) > > bash-2.05b# hciconfig hci0 revision > hci0: Type: USB > BD Address: 00:A0:96:1F:42:BF ACL MTU: 192:8 SCO MTU: 64:8 > HCI 13.10 > Chip version: BlueCore01b > Max key size: 56 bit > SCO mapping: HCI you need a *.dfu firmware file from your dongle manufacturer. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel