Return-Path: From: "franz keuner" To: bluez-devel@lists.sourceforge.net MIME-Version: 1.0 Message-ID: <7407.1080119240@www16.gmx.net> Content-Type: text/plain; charset="iso-8859-1" Subject: [Bluez-devel] rfcomm receive problem and success Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 24 Mar 2004 10:07:20 +0100 (MET) hello, with your help i had quite a success in sending data from my mobile phone to bluez. but there's something i don't understand. i registered a SP service: sdptool add --channel=10 SP ./rctest -d rctest[2482]: Waiting for connection on channel 10 ... rctest[2483]: Connect from 00:00:00:00:00:00 rctest[2483]: Receiving ... rctest[2483]: Recevied 51 bytes rctest[2483]: Disconnect and the programm doesn't exit, i have to use ctr-c to stop it. is this normal or is something going wrong although the receiving was successful? and something else: if i try to receive with the 'r' option there's an error: ./rctest -r rctest[2458]: Waiting for connection on channel 10 ... rctest[2459]: Connect from 00:00:00:00:00:00 rctest[2459]: Receiving ... rctest[2459]: Read failed. Connection reset by peer(104) rctest[2459]: Disconnect has anybody an idea what's my fault? i think somehow it's possible to use the read socket function but not the recv function... regards, franz hcidump shows the following messages using the -r option: device: hci0 snap_len: 1028 filter: 0xffffffff > HCI Event: Connect Request(0x04) plen 10 AD 1C E8 D9 0A 00 00 00 00 01 < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 AD 1C E8 D9 0A 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 09 04 > HCI Event: Connect Complete(0x03) plen 11 00 28 00 AD 1C E8 D9 0A 00 01 00 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 28 00 0E 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 AD 1C E8 D9 0A 00 01 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 28 00 < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 28 00 18 CC > HCI Event: Command Status(0x0f) plen 4 00 01 0F 04 > HCI Event: Connection Packet Type Changed(0x1d) plen 5 00 28 00 18 CC > ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 3 scid 0x0046 < ACL data: handle 0x0028 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0046 result 0 status 0 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > HCI Event: Max Slots Change(0x1b) plen 3 28 00 05 > ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 < ACL data: handle 0x0028 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0046 flags 0x0000 result 0 clen 0 < ACL data: handle 0x0028 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0046 flags 0x0000 clen 4 MTU 1024 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > ACL data: handle 0x0028 flags 0x02 dlen 18 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4 MTU 672 > ACL data: handle 0x0028 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 3] RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c < ACL data: handle 0x0028 flags 0x02 dlen 8 L2CAP(d): cid 0x46 len 4 [psm 3] RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > ACL data: handle 0x0028 flags 0x02 dlen 18 L2CAP(d): cid 0x40 len 14 [psm 3] RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 20 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 667 max_retrans 0 credits 3 < ACL data: handle 0x0028 flags 0x02 dlen 18 L2CAP(d): cid 0x46 len 14 [psm 3] RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 dlci 20 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size 667 max_retrans 0 credits 7 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > ACL data: handle 0x0028 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 3] RFCOMM(s): SABM: cr 1 dlci 20 pf 1 ilen 0 fcs 0xfd < ACL data: handle 0x0028 flags 0x02 dlen 8 L2CAP(d): cid 0x46 len 4 [psm 3] RFCOMM(s): UA: cr 1 dlci 20 pf 1 ilen 0 fcs 0x36 < ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(d): cid 0x46 len 8 [psm 3] RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2 dlci 20 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(d): cid 0x40 len 8 [psm 3] RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2 dlci 20 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0 < ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(d): cid 0x46 len 8 [psm 3] RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2 dlci 20 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0 > ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(d): cid 0x40 len 8 [psm 3] RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2 dlci 20 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0 < ACL data: handle 0x0028 flags 0x02 dlen 9 L2CAP(d): cid 0x46 len 5 [psm 3] RFCOMM(d): UIH: cr 0 dlci 20 pf 1 ilen 0 fcs 0xf7 21 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > ACL data: handle 0x0028 flags 0x02 dlen 60 L2CAP(d): cid 0x40 len 56 [psm 3] RFCOMM(d): UIH: cr 1 dlci 20 pf 1 ilen 51 fcs 0x2d 04 30 30 3A 30 41 3A 44 39 3A 45 38 3A 31 43 3A 41 44 20 45 73 6B 50 39 30 30 20 54 75 65 20 4D 61 72 20 32 33 20 31 35 3A 34 33 3A 35 32 20 32 30 30 34 0A > ACL data: handle 0x0028 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 3] RFCOMM(s): DISC: cr 1 dlci 20 pf 1 ilen 0 fcs 0x1c < ACL data: handle 0x0028 flags 0x02 dlen 8 L2CAP(d): cid 0x46 len 4 [psm 3] RFCOMM(s): UA: cr 1 dlci 20 pf 1 ilen 0 fcs 0x36 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0046 < ACL data: handle 0x0028 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0046 > HCI Event: Number of Completed Packets(0x13) plen 5 01 28 00 01 00 > HCI Event: Disconn Complete(0x05) plen 4 00 28 00 13 -- +++ NEU bei GMX und erstmalig in Deutschland: T?V-gepr?fter Virenschutz +++ 100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel