Return-Path: Subject: Re: [Bluez-devel] business card transfer problem From: Stephen Crane To: franz keuner Cc: bluez-devel@lists.sourceforge.net In-Reply-To: <1269.1082534936@www62.gmx.net> References: <1269.1082534936@www62.gmx.net> Content-Type: text/plain Message-Id: <1082560496.29569.219.camel@baroque.rococosoft.com> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 21 Apr 2004 16:14:57 +0100 Just try it and then run "hciconfig hci0 class" again! It will tell you if you get it right! hciconfig hci0 class 0x100104 hciconfig hci0 class hci0: Type: USB BD Address: 00:80:98:24:4E:8A ACL MTU: 192:8 SCO MTU: 64:8 Class: 0x100104 Service Classes: Object Transfer Device Class: Computer, Desktop workstation On Wed, 2004-04-21 at 09:08, franz keuner wrote: > hi steve, > > thanks for your quick answer. > that's the answer of my linux computer to hciconfig hci0 class > > hci0: Type: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 192:8 SCO MTU: 64:8 > Class: 0x000100 > Service Classes: Unspecified > Device Class: Computer, Uncategorized > > i don't know what i have to change exactly here... > > i read the bluetooth assigned numbers document. would i have to enter > > hciconfig hci0 class 0x100104 > > to make the right changes class? (the 1st hex number representing obex file > transfer and the rest represting a desktop computer) > > and if that's right, is the pda in contrast to the phone ignoring this > mistake because it's possible to receive businesscards from the pda? > > regards, > > franz > > > Hi Franz, > > Make sure you have the correct class-of-device setting on the Linux box. > > (See hciconfig(8).) Phones and PDAs often don't even bother doing an SDP > > search if the device-class obtained by device discovery doesn't contain > > the correct hint bits. > > > > Cheers, > > Steve > > > > On Tue, 2004-04-20 at 09:56, franz keuner wrote: > > > hi marcel, > > > > > > for quite a while i had no questions concerning bluez and my Sony > > Ericsson > > > P900 ;-) > > > with your help i made a lot of progress. > > > > > > now i'm trying to send and receive businesscards (version2.1) between > > the > > > linux computer with bluez and the mobile phone. > > > > > > i installed the openobex package for suse 9.0 and the openobex > > applications. > > > > > > i can send a businesscard from the linux computer to the mobile phone > > using > > > the obextest tool from the applications package. > > > > > > but if i try to receive a businesscard from the mobile phone on the > > linux > > > computer with the opd program the phone reports a failure trying to > > transfer > > > the businesscard to the linux computer. > > > > > > but it works if i try to send the same businesscard from the phone to a > > pda. > > > the pda receives the businesscard correctly. > > > > > > and if try to receive the businesscard from the pda on the linux > > computer > > > with the opd program this is also working. > > > > > > i'm sure i'm listening on the right channels. maybe the problem is that > > the > > > phone can't communicate with the opd program waiting for a connection... > > > > > > do you have any ideas or hints? > > > > > > regards, > > > > > > franz > > > > > > hcidump shows the following trying to the send from the phone to the > > linux > > > computer: > > > > > > hcidump r > > > HCIDump - HCI packet analyzer ver 1.5 > > > device: hci0 snap_len: 1028 filter: 0xffffffff > > > > HCI Event: Connect Request(0x04) plen 10 > > > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 > > > > HCI Event: Command Status(0x0f) plen 4 > > > > HCI Event: Connect Complete(0x03) plen 11 > > > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > > > > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 > > > > HCI Event: Command Complete(0x0e) plen 6 > > > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 -- Stephen Crane, Rococo Software Ltd. http://www.rococosoft.com steve.crane@rococosoft.com +353-1-6601315 (ext 209) ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel