Return-Path: Mime-Version: 1.0 (Apple Message framework v613) Message-Id: Content-Type: text/plain; charset=US-ASCII; format=flowed To: BlueZ Mailing List From: Michael Frey Subject: [Bluez-devel] Unable to get hciattach to work... Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 21 Apr 2004 10:47:56 -0400 I just recently upgraded my kernel from 2.4.18 to 2.4.20 and am trying to get my bluetooth module to work. I have been using bluez with great success with my 2.4.18 kernel but no luck with 2.4.20. When I issue the hciattach command here is what I get. ./hciattach /dev/ttyS1 bcsp 115200 BlueZ HCI UART driver ver 2.0 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky insmod: Note: /etc/modules.conf is more recent than /lib/modules/2.4.20_mvl31-dbpxa2xx/modules.dep Can't set device: Protocol not supported Can't initialize device: Illegal seek root@(none):/opt/bluetooth# lsmod Module Size Used by Tainted: P hci_uart 5444 0 (autoclean) bluez 34672 1 (autoclean) [hci_uart] spectrum_cs 75772 1 orinoco 33716 0 [spectrum_cs] hermes 4408 0 [spectrum_cs orinoco] ide-cs 3572 1 ds 7472 2 [spectrum_cs ide-cs] pxa_cs 9296 2 pcmcia_core 34672 0 [spectrum_cs ide-cs ds pxa_cs] How do I go about debugging this? I am using the kernel modules that are in the kernel tree. Thanks, Michael Frey ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel