Return-Path: Subject: Re: [Bluez-devel] business card transfer problem From: Marcel Holtmann To: franz keuner Cc: BlueZ Mailing List In-Reply-To: <8333.1082451393@www65.gmx.net> References: <8333.1082451393@www65.gmx.net> Content-Type: text/plain Message-Id: <1082459510.23959.10.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 20 Apr 2004 13:11:50 +0200 Hi Franz, > hcidump shows the following trying to the send from the phone to the linux > computer: > > hcidump r > HCIDump - HCI packet analyzer ver 1.5 > device: hci0 snap_len: 1028 filter: 0xffffffff > > HCI Event: Connect Request(0x04) plen 10 > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 > > HCI Event: Command Status(0x0f) plen 4 > > HCI Event: Connect Complete(0x03) plen 11 > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 > > HCI Event: Command Complete(0x0e) plen 6 > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 > > HCI Event: Command Status(0x0f) plen 4 > > HCI Event: Connection Packet Type Changed(0x1d) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0054 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0054 result 0 status 0 > > HCI Event: Max Slots Change(0x1b) plen 3 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0054 flags 0x0000 result 0 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0054 flags 0x0000 clen 0 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0054 flags 0x0000 result 0 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0054 flags 0x0000 clen 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > > ACL data: handle 0x0028 flags 0x02 dlen 17 > L2CAP(d): cid 0x40 len 13 [psm 1] > SDP SS Req: tid 0x1 len 0x8 > pat uuid-16 0x1105 (OBEXObjPush) > max 0xffff > cont 00 > < ACL data: handle 0x0028 flags 0x02 dlen 22 > L2CAP(d): cid 0x54 len 18 [psm 1] > SDP SS Rsp: tid 0x1 len 0xd > cur 0x2 tot 0x2 hndl 0x804d490 0x804d5f8 > cont 00 > > ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > > ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 > MTU 672 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0054 flags 0x0000 result 0 clen 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0055 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0055 result 0 status 0 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0055 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0055 result 4 status 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Disconn Complete(0x05) plen 4 the L2CAP config request/response is totally weird. I thing that the Bluetooth stack of the P900 is buggy. What Linux kernel do you use? Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel