Return-Path: Subject: Re: [Bluez-devel] business card transfer problem From: Stephen Crane To: franz keuner Cc: bluez-devel@lists.sourceforge.net In-Reply-To: <8333.1082451393@www65.gmx.net> References: <8333.1082451393@www65.gmx.net> Content-Type: text/plain Message-Id: <1082452207.29569.2.camel@baroque.rococosoft.com> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 20 Apr 2004 10:10:08 +0100 Hi Franz, Make sure you have the correct class-of-device setting on the Linux box. (See hciconfig(8).) Phones and PDAs often don't even bother doing an SDP search if the device-class obtained by device discovery doesn't contain the correct hint bits. Cheers, Steve On Tue, 2004-04-20 at 09:56, franz keuner wrote: > hi marcel, > > for quite a while i had no questions concerning bluez and my Sony Ericsson > P900 ;-) > with your help i made a lot of progress. > > now i'm trying to send and receive businesscards (version2.1) between the > linux computer with bluez and the mobile phone. > > i installed the openobex package for suse 9.0 and the openobex applications. > > i can send a businesscard from the linux computer to the mobile phone using > the obextest tool from the applications package. > > but if i try to receive a businesscard from the mobile phone on the linux > computer with the opd program the phone reports a failure trying to transfer > the businesscard to the linux computer. > > but it works if i try to send the same businesscard from the phone to a pda. > the pda receives the businesscard correctly. > > and if try to receive the businesscard from the pda on the linux computer > with the opd program this is also working. > > i'm sure i'm listening on the right channels. maybe the problem is that the > phone can't communicate with the opd program waiting for a connection... > > do you have any ideas or hints? > > regards, > > franz > > hcidump shows the following trying to the send from the phone to the linux > computer: > > hcidump r > HCIDump - HCI packet analyzer ver 1.5 > device: hci0 snap_len: 1028 filter: 0xffffffff > > HCI Event: Connect Request(0x04) plen 10 > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 > > HCI Event: Command Status(0x0f) plen 4 > > HCI Event: Connect Complete(0x03) plen 11 > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 > > HCI Event: Command Complete(0x0e) plen 6 > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 > > HCI Event: Command Status(0x0f) plen 4 > > HCI Event: Connection Packet Type Changed(0x1d) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0054 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0054 result 0 status 0 > > HCI Event: Max Slots Change(0x1b) plen 3 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0054 flags 0x0000 result 0 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0054 flags 0x0000 clen 0 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0054 flags 0x0000 result 0 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Config req: dcid 0x0054 flags 0x0000 clen 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > > ACL data: handle 0x0028 flags 0x02 dlen 17 > L2CAP(d): cid 0x40 len 13 [psm 1] > SDP SS Req: tid 0x1 len 0x8 > pat uuid-16 0x1105 (OBEXObjPush) > max 0xffff > cont 00 > < ACL data: handle 0x0028 flags 0x02 dlen 22 > L2CAP(d): cid 0x54 len 18 [psm 1] > SDP SS Rsp: tid 0x1 len 0xd > cur 0x2 tot 0x2 hndl 0x804d490 0x804d5f8 > cont 00 > > ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > > ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 > MTU 672 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0054 flags 0x0000 result 0 clen 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0055 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0055 result 0 status 0 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0055 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0055 result 4 status 0 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Disconn Complete(0x05) plen 4 -- Stephen Crane, Rococo Software Ltd. http://www.rococosoft.com steve.crane@rococosoft.com +353-1-6601315 (ext 209) ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel