Return-Path: Subject: RE: [Bluez-devel] Flush timeout at Baseband From: Marcel Holtmann To: Wang Haiguang Cc: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1085494294.9779.130.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 25 May 2004 16:11:34 +0200 Hi Haiguang, > Please refer to the following section in Bluetooth specification 1.2: > > -- Volume 2: Core System Package > -- Part E: Host Controller Interface Functional Specification > -- Chapter 6: HCI Configuration Parameters > -- Section 6.20: Flush Timeout. > > It explains the use of flush timeout value for ACL data and default is > infinite. > > In PART B: the baseband specification, section 7.6.3, it explains this > parameter > is designed for the delay sensitive traffic such as voice/video. > > As in our project, we definitely need this parameter in configuration. So > asked for > the plan of including it in impelmentaion. I checked the spec. by myself, because I don't asked for the explanation of flush timeout. I asked for the HCI command to read or write it. The commands are in 7.3.31 and 7.3.32 (read/write_automatic_flush_timeout). These commands take a connection handle as parameter and so they are connection specific and belong to hcitool. If they are not implemented and you need them, send me a patch for hcitool.c and its manpage. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel