Return-Path: Subject: Re: [Bluez-devel] snd-bt-sco From: Marcel Holtmann To: Peter Favrholdt Cc: BlueZ Mailing List In-Reply-To: <40E346A8.2050209@mip.sdu.dk> References: <40E33BF2.7010705@mip.sdu.dk> <40E346A8.2050209@mip.sdu.dk> Content-Type: text/plain Message-Id: <1088691001.4540.230.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 01 Jul 2004 16:10:01 +0200 Hi Peter, > Well, I figured out I didn't have the /dev/snd/* device files > > So now it almost works. The headset seems connected. I can use alsamixer (and > the volume buttons on the headset changes the volume in the mixer window). > hciconfig shows data is flowing at a steady rate from the microphone: > > hci0: Type: USB > BD Address: 00:0B:0D:20:79:21 ACL MTU: 339:4 SCO MTU: 64:0 > UP RUNNING PSCAN ISCAN > RX bytes:8895374 acl:72 sco:329395 events:232 errors:0 > TX bytes:3768 acl:151 sco:0 commands:47 errors:0 > > But no sound and I am not sure that your USB dongle supports SCO over HCI. Show us the output of "hciconfig -a" and "cat /proc/bus/usb/devices". Regards Marcel ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel