Message-ID: <410E51C9.1020401@celar.fr>
From: =?ISO-8859-1?Q?J=E9r=F4me_LECOMTE?= <lecomte@celar.fr>
MIME-Version: 1.0
To: bluez-devel@lists.sourceforge.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Subject: [Bluez-devel] IPv6 Bluez and Router Advertissement
Sender: bluez-devel-admin@lists.sourceforge.net
Errors-To: bluez-devel-admin@lists.sourceforge.net
Date: Mon, 02 Aug 2004 16:38:01 +0200

Hi,

I'm having a problem concerning IPv6 autoconfiguration over Bluetooth 
with Bluez Stack.
I set up a PICONET architecture like described in the "PAN How to". A 
bridgde is taking care of all point-to-point bnep interfaces between the 
master node and the slaves.
This master node acts like a router to provide access to a MANET 802.11b 
network and implements IPV6 technology. Ipv4 configuration works well.
My aim is to provide IPv6 autoconfiguration to the BT slaves nodes.
I installed RADVD on the router in order to broadcast an ipv6 prefix to 
BT nodes but they can't achieve to auto-configure.
The auto configuration is working through an ethernet link so the 
problem comes from Bluetooth  I think.
With a sniffer, router sollicication are going well from the slave to 
the router but router advertisement (with ipv6 prefix) can't go through 
Bluetooth links (sniffer on slaves shows that) and I don't understand why.
Experience about this would be welcome

Cheers.


-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel