Message-ID: <00b001c4dfa9$f3bc0870$6401000a@zool>
From: "Steffen Larsen" <zool@zool.dk>
To: <bluez-devel@lists.sourceforge.net>
References: <00c901c4df6a$f8c11f70$6401000a@zool> <1102764489.19086.15.camel@pegasus>  <016d01c4df70$a8e297d0$6401000a@zool> <1102767035.19086.18.camel@pegasus> <01a901c4df7a$666d4da0$6401000a@zool> <002d01c4df96$cc2e2080$6401000a@zool> <1102783440.19086.28.camel@pegasus> <003901c4df9e$a3fead20$6401000a@zool> <1102786636.19086.34.camel@pegasus>
Subject: Re: [Bluez-devel] piconet..
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Sender: bluez-devel-admin@lists.sourceforge.net
Errors-To: bluez-devel-admin@lists.sourceforge.net
Reply-To: bluez-devel@lists.sourceforge.net
Date: Sat, 11 Dec 2004 18:50:50 +0100

Hi Marcel,

> > I got the two others:
> >
> >  hci0: Type: USB
> > BD Address: 00:01:53:00:14:EE ACL MTU: 192:8 SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN
> > RX bytes:81 acl:0 sco:0 events:10 errors:0
> > TX bytes:39 acl:0 sco:0 commands:10 errors:0
> > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy:
> > Link mode: SLAVE ACCEPT
> > Name: 'knoglen'
> > Class: 0x000000
> > Service Classes: Unspecified
> > Device Class: Miscellaneous,
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
> > Manufacturer: Cambridge Silicon Radio (10)
> >
> > hci0: Type: USB
> > BD Address: 00:01:53:00:0D:B5 ACL MTU: 192:8 SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN
> > RX bytes:87 acl:0 sco:0 events:11 errors:0
> > TX bytes:39 acl:0 sco:0 commands:10 errors:0
> > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy:
> > Link mode: SLAVE ACCEPT
> > Name: 'JESPER'
> > Class: 0x000000
> > Service Classes: Unspecified
> > Device Class: Miscellaneous,
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
> > Manufacturer: Cambridge Silicon Radio (10)
>
> these two are HCI 16.4 and so there should be no problem. See my CSR
> page why it is good to have HCI 16.x at least.
>
> > > so far so good, but check with "hciconfig hci0 revision" for the
> > > firmware version. This one is too old. It should be HCI 16.4 or newer,
> > > but if this is a DBT-120 Rev. B3 you might have a chance to update it.
> >
> > Well. It is the B3 revision, so I would be able to do that. :-)
>
> I suppose you do that (at your own risk of course).
>
> > Hmm.. This dosn't really answer my question. I am using fork()., and
would
> > like to get my application to work. I tried to compare it towards the
> > l2test, but couldn't see that much difference. And the l2test works with
the
> > same dongles; connecting two clients against one server. Can you point
> > somewhere in my code, where I should do some changes, so it could work??
>
> Getting the fork stuff right is not very easy. You must carefully think
> about what file descriptors to close at what time and in what process. I
> am not going to check your code for such mistakes, because it will take
> me too much time and the other reason is that it is C++ and not C.

I understand. I have been spending alot of time in it my self. I will look
deeper into the socket, and which of them that have been closed and at which
time... But I think I have checked this a million times.. But I will try
again! :-)

> Update the dongle or try to swap the pre HCI 16.4 one. The master option
> can help, but you must choose the master device carefully.

Yes I can try to swap the devices. You mention that the master device should
be carefully choosen. I what way?
I have just assumed that my server should be the master, and thats that.
What should I taken in to consideration?

-Once again thanks for all the quick answers! :-)

/Steffen Larsen


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel