Message-ID: <41B40C4B.90002@avantwave.com>
From: mike <mikelee@avantwave.com>
MIME-Version: 1.0
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] About rfcomm socket
References: <41AD2B86.6010002@avantwave.com>	 <1101882506.18840.18.camel@pegasus>  <41AD867D.2060609@avantwave.com>	 <1101894514.18840.50.camel@pegasus>  <41AE995F.7030107@avantwave.com>	 <1101973471.15615.81.camel@pegasus>  <41AFDAAB.8010101@avantwave.com> <1102043750.7350.41.camel@pegasus>
In-Reply-To: <1102043750.7350.41.camel@pegasus>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Sender: bluez-devel-admin@lists.sourceforge.net
Errors-To: bluez-devel-admin@lists.sourceforge.net
Reply-To: bluez-devel@lists.sourceforge.net
Date: Mon, 06 Dec 2004 15:37:47 +0800

Dear Marcel
    That is old version of bluez version, is it the problem ? Anyway, i 
upgrade that first.

    Thanks
best regard
Mike,Lee

Marcel Holtmann wrote:

>Hi Mike,
>
>  
>
>>hci0:   Type: UART
>>        BD Address: 00:08:E0:01:49:6A ACL MTU: 192:8  SCO MTU: 64:8
>>        UP RUNNING PSCAN ISCAN
>>        RX bytes:231 acl:0 sco:0 events:27 errors:0
>>        TX bytes:630 acl:0 sco:0 commands:27 errors:0
>>        Features: 0xff 0xff 0x8b 0x78 0x18 0x18 0x00 0x80
>>        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>>        Link policy: RSWITCH HOLD SNIFF PARK
>>        Link mode: SLAVE ACCEPT
>>        Name: 'test'
>>        Class: 0x000100
>>        Service Classes: Unspecified
>>        Device Class: Computer, Uncategorized
>>        HCI Ver: 1.2 (0x2) HCI Rev: 0x490 LMP Ver: 1.2 (0x2) LMP Subver: 
>>0x490
>>        Manufacturer: Cambridge Silicon Radio (10)
>>    
>>
>
>this one is fine, because it is a HCI 18.x firmware.
>
>  
>
>>hci0:   Type: USB
>>        BD Address: 00:08:E0:00:00:04 ACL MTU: 192:8  SCO MTU: 64:8
>>        UP RUNNING PSCAN ISCAN
>>        RX bytes:4031 acl:64 sco:0 events:143 errors:0
>>        TX bytes:2429 acl:66 sco:0 commands:31 errors:0
>>        Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
>>        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>>        Link policy:
>>        Link mode: SLAVE ACCEPT
>>        Name: 'mike'
>>        Class: 0x000000
>>        Service Classes: Unspecified
>>        Device Class: Miscellaneous,
>>        HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 
>>0x175
>>        Manufacturer: Cambridge Silicon Radio (10)
>>    
>>
>
>This one is HCI 14.7 and previous HCI 16.x which is not good.
>
>  
>
>>Actually, the 3rd device is a bluetooth-embedded phone, i can not get 
>>the configuration out. SLAVE is accept for my target device, is it what 
>>you want to see?
>>    
>>
>
>You can, use "hcitool info ..." as root.
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now. 
>http://productguide.itmanagersjournal.com/
>_______________________________________________
>Bluez-devel mailing list
>Bluez-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
>  
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel