Message-ID: <41AFDAAB.8010101@avantwave.com>
From: mike <mikelee@avantwave.com>
MIME-Version: 1.0
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] About rfcomm socket
References: <41AD2B86.6010002@avantwave.com>	 <1101882506.18840.18.camel@pegasus>  <41AD867D.2060609@avantwave.com>	 <1101894514.18840.50.camel@pegasus>  <41AE995F.7030107@avantwave.com> <1101973471.15615.81.camel@pegasus>
In-Reply-To: <1101973471.15615.81.camel@pegasus>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Sender: bluez-devel-admin@lists.sourceforge.net
Errors-To: bluez-devel-admin@lists.sourceforge.net
Reply-To: bluez-devel@lists.sourceforge.net
Date: Fri, 03 Dec 2004 11:16:59 +0800

Dear Marcel
    Target device:
hci0:   Type: UART
        BD Address: 00:08:E0:01:49:6A ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:231 acl:0 sco:0 events:27 errors:0
        TX bytes:630 acl:0 sco:0 commands:27 errors:0
        Features: 0xff 0xff 0x8b 0x78 0x18 0x18 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'test'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 1.2 (0x2) HCI Rev: 0x490 LMP Ver: 1.2 (0x2) LMP Subver: 
0x490
        Manufacturer: Cambridge Silicon Radio (10)

    Computer A:
hci0:   Type: USB
        BD Address: 00:08:E0:00:00:04 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:4031 acl:64 sco:0 events:143 errors:0
        TX bytes:2429 acl:66 sco:0 commands:31 errors:0
        Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy:
        Link mode: SLAVE ACCEPT
        Name: 'mike'
        Class: 0x000000
        Service Classes: Unspecified
        Device Class: Miscellaneous,
        HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 
0x175
        Manufacturer: Cambridge Silicon Radio (10)

Actually, the 3rd device is a bluetooth-embedded phone, i can not get 
the configuration out. SLAVE is accept for my target device, is it what 
you want to see?

thanks for helping

best regard
Mike,Lee

Marcel Holtmann wrote:

>Hi Mike,
>
>  
>
>>There are 3 device, Target device, computer A, computer B. Target device 
>>is running the code below i.e. connect to computer A through channel 3 
>>and listen at channel 2. It supposed that computer B can connect to 
>>target device when target device is connecting others, but it fails. And 
>>when target stop connecting computer A, computer B can then connect to 
>>target with channel 2!
>>    
>>
>
>what are the outputs of "hciconfig -a" for these three devices?
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now. 
>http://productguide.itmanagersjournal.com/
>_______________________________________________
>Bluez-devel mailing list
>Bluez-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
>  
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel