Return-Path: To: bluez-devel@lists.sourceforge.net From: Matthias Brune Message-ID: References: <1106136563.8190.89.camel@pegasus> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [Bluez-devel] Re: Sending own L2CAP packets to HCI Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 21 Jan 2005 00:31:33 +0000 (UTC) Hi Marcel, i tried to change the l2ping program by using another command header. Instead of L2CAP_ECHO_REQ and L2CAP_ECHO_RES i used L2CAP_CONN_REQ and L2CAP_CONN_RES, because i want to build a full connection with connect, configure and disconnect later... It seemed that it works, but hcidump said that the connect request is rejected. Is it in general possible to inject own L2CAP packets (with configure requests) to a phone by using the l2ping programm. I mean is the socket setup in this program for this use sufficient or do i have to inject the packets directly to the usb driver? Because i think the command reject comes from the Bluez stack and i have to inject the L2CAP packets without using the BlueZ stack? HCI Command: Create Connection(0x01|0x0005) plen 13 65 CF 93 EE 02 00 18 CC 02 00 00 00 01 HCI Event: Command Status(0x0f) plen 4 00 01 05 04 HCI Event: Connect Complete(0x03) plen 11 00 29 00 65 CF 93 EE 02 00 01 00 HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 29 00 0F 00 ACL data: handle 0x0029 flags 0x02 dlen 28 L2CAP(s): Connect req: psm 17989 scid 0x4847 HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 29 00 HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 65 CF 93 EE 02 00 01 HCI Event: Max Slots Change(0x1b) plen 3 29 00 05 ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0000 result 2 status 0 ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(s): Command rej: reason 0 HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 HCI Command: Disconnect(0x01|0x0006) plen 3 29 00 13 HCI Event: Command Status(0x0f) plen 4 00 01 06 04 HCI Event: Disconn Complete(0x05) plen 4 00 29 00 16 ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel