Return-Path: To: bluez-devel@lists.sourceforge.net From: Matthias =?utf-8?b?QnJ1bsOp?= Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [Bluez-devel] Sending own L2CAP packets to HCI Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 19 Jan 2005 11:21:49 +0000 (UTC) Dear Marcel, I wrote a program that builds its own L2CAP packets together. And now I want to inject these L2CAP packets to a mobile phone. I begin the transmission with a simple "connection request", but the command is rejected with reason 0 (command not understood). Can you tell me how to inject L2CAP packets to HCI without using the BlueZ L2CAP layer? best regards Matthias hci dump: HCIDump - HCI packet analyzer ver 1.7 device: hci0 snap_len: 1028 filter: 0xffffffff HCI Command: Create Connection(0x01|0x0005) plen 13 HCI Event: Command Status(0x0f) plen 4 HCI Event: Connect Complete(0x03) plen 11 HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x005d HCI Event: Number of Completed Packets(0x13) plen 5 HCI Event: Command Complete(0x0e) plen 6 HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 HCI Event: Max Slots Change(0x1b) plen 3 ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005d result 0 status 0 ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(s): Command rej: reason 0 ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x005d flags 0x0000 clen 0 ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(s): Command rej: reason 0 HCI Event: Number of Completed Packets(0x13) plen 5 HCI Event: Number of Completed Packets(0x13) plen 5 ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 HCI Event: Number of Completed Packets(0x13) plen 5 ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Command rej: reason 2 HCI Event: Number of Completed Packets(0x13) plen 5 ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x005d HCI Event: Number of Completed Packets(0x13) plen 5 ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Command rej: reason 2 HCI Command: Disconnect(0x01|0x0006) plen 3 HCI Event: Command Status(0x0f) plen 4 HCI Event: Disconn Complete(0x05) plen 4 ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel