Return-Path: Subject: Re: [Bluez-devel] Connection with a phone stays open after closing RFCOMM channel From: Marcel Holtmann To: BlueZ Mailing List Cc: victor@win.tue.nl In-Reply-To: References: Content-Type: text/plain Message-Id: <1109578068.17256.0.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 28 Feb 2005 09:07:48 +0100 Hi Victor, > My prog. listens on a RFCOMM chan. (adv. as HF channel via SDP) of a > laptop, when I > connect from my phone to the laptop the chan. is opened, I send some > commands to configure the phone and when finished, close the chan. The > problem is that L2CAP connection stays open, from the output of hcidump I > see that laptop sends DISC request on dlci 6 and receives UA, but then > according to protocol it should also then send DISC for dlci 0, and then > terminate L2CAP -- it does not happen... > If I do the same, but initiating connection from laptop - it works fine... > I'm sure there is no other RFCOMM chan. opened. sounds like a bug in the phone. Send in the "hcidump -X -V" for it. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel