Return-Path: From: Victor Shcherbatyuk To: bluez-devel@lists.sourceforge.net Cc: victor@win.tue.nl Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: [Bluez-devel] Connection with a phone stays open after closing RFCOMM channel Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 27 Feb 2005 14:25:16 +0100 (MET) Hi Marcel! I have the following prob.: My prog. listens on a RFCOMM chan. (adv. as HF channel via SDP) of a laptop, when I connect from my phone to the laptop the chan. is opened, I send some commands to configure the phone and when finished, close the chan. The problem is that L2CAP connection stays open, from the output of hcidump I see that laptop sends DISC request on dlci 6 and receives UA, but then according to protocol it should also then send DISC for dlci 0, and then terminate L2CAP -- it does not happen... If I do the same, but initiating connection from laptop - it works fine... I'm sure there is no other RFCOMM chan. opened. I have latest lib. and utils, 2.6.10 kernel not pached. The phone is SE630. Thanks in advance. Kind regards, Victor Shcherbatyuk. -- P.S. btw, phone detects that RFCOMM chan. is closed and changes HF icon to general connected icon... ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel