Return-Path: From: Peter Wippich To: Subject: Re: [Bluez-devel] Hardware error In-Reply-To: <41FF6E2C.7040908@avantwave.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 1 Feb 2005 13:31:28 +0100 (CET) Hi Mike, a possible cause of a hardware error is an Uart overrun. Do you have hardware handshake enabled ?? Ciao, Peter On Tue, 1 Feb 2005, mike wrote: > Dear All > When i try to send file though bluetooth, there is a hardware error > in hcidump. I am using serial dongle with CSR BC02 external chip set, > hci firmware ver 18.1. And then both side will halt at the bluetooth > read/write system call. I want to find out is it the problem from my > hardware or anything else. Do anyone have ideas? > > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > < ACL data: handle 0x002a flags 0x02 dlen 20 > L2CAP(d): cid 0x62 len 16 [psm 3] > RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 12 fcs 0x40 > < ACL data: handle 0x002a flags 0x02 dlen 192 > > HCI Event: Number of Completed Packets(0x13) plen 5 > > HCI Event: Number of Completed Packets(0x13) plen 5 > < ACL data: handle 0x002a flags 0x01 dlen 139 > L2CAP(d): cid 0x62 len 327 [psm 3] > RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 322 fcs 0x40 > > HCI Event: Hardware Error(0x10) plen 1 > > ACL data: handle 0x002a flags 0x02 dlen 9 > L2CAP(d): cid 0x40 len 5 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 3 > < ACL data: handle 0x002a flags 0x02 dlen 20 > L2CAP(d): cid 0x62 len 16 [psm 3] > RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 12 fcs 0x40 > < ACL data: handle 0x002a flags 0x02 dlen 192 > > > hci0: Type: UART > BD Address: 00:08:E0:01:49:6A ACL MTU: 192:8 SCO MTU: 64:8 > UP RUNNING PSCAN ISCAN > RX bytes:149871 acl:2811 sco:0 events:12828 errors:0 > TX bytes:1847648 acl:15873 sco:0 commands:307 errors:0 > Features: 0xff 0xff 0x8b 0x78 0x18 0x18 0x00 0x80 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Name: 'mike (0)' > Class: 0x000100 > Service Classes: Unspecified > Device Class: Computer, Uncategorized > HCI Ver: 1.2 (0x2) HCI Rev: 0x490 LMP Ver: 1.2 (0x2) LMP Subver: > 0x490 > Manufacturer: Cambridge Silicon Radio (10) > > best regard > Mike,Lee > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting > Tool for open source databases. Create drag-&-drop reports. Save time > by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. > Download a FREE copy at http://www.intelliview.com/go/osdn_nl > _______________________________________________ > Bluez-devel mailing list > Bluez-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-devel > | Peter Wippich Voice: +49 30 46776411 | | G&W Instruments GmbH fax: +49 30 46776419 | | Gustav-Meyer-Allee 25, Geb. 12 Email: pewi@gw-instruments.de | | D-13355 Berlin / Germany | ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel