Return-Path: Subject: Re: [Bluez-devel] hcitool cc timeout - change able ? From: Marcel Holtmann To: bluez-devel@lists.sourceforge.net In-Reply-To: References: Content-Type: text/plain Message-Id: <1117029743.30044.212.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 25 May 2005 16:02:23 +0200 Hi Phil, > could some one please tell me if there is a way to reduce the timeout time > ? e.g. to 2 ? > > I would like to do this, because I like to find out what the link > quality and rssi of a device is. As > my bluetooth hardware only supports 1.1 and not 1.2 I have to connect to > the device first in order to find out the above information. As my list of > BT devices I would like to find the above info out about is constantly > growing I have a problem with the hcitool cc timeout, as I do: > > hcitool cc BT-address > hcitool lq BT-address > hcitool dc BT-address > > If the device is in range the three commands are very quick, but if the > device is not in range the connect command takes a long time till it times > out. > So my question is, is there a way to reduce the timeout time ? e.g. to 2 > sec. ? you are looking for the page timeout. Look at the manual page of hciconfig. Regards Marcel ------------------------------------------------------- SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate online with coworkers and clients while avoiding the high cost of travel and communications. There is no equipment to buy and you can meet as often as you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel