Content-Type: text/plain;
  charset="iso-8859-1"
From: Ronny L Nilsson <bb@arbetsmyra.dyndns.org>
To: bluez-devel@lists.sourceforge.net
MIME-Version: 1.0
Message-Id: <20050707223942.12A0D464@arbetsmyra.dyndns.org>
Subject: [Bluez-devel] Power control for EDR
Sender: bluez-devel-admin@lists.sourceforge.net
Errors-To: bluez-devel-admin@lists.sourceforge.net
Reply-To: bluez-devel@lists.sourceforge.net
Date: Fri, 8 Jul 2005 00:39:28 +0200


Hi
I'm currently implementing transmitter power control for CSR chipsets. 
I've manged to succed with BlueCore2 and has moved on to BlueCore4 with 
BT v2.0 and EDR. This one is much trickier though, especially since I'm 
lacking documentation. 

Marcel, do you (or any one else for that matter) have information about 
the pskey and bccmd constants PSKEY_LC_ENHANCED_POWER_TABLE and 
LIMIT_EDR_POWER? I've seen them mentioned as text only, without the 
corresponding necessary value.  :(  Perhaps they can be looked up in 
the development utils PSTool or BTCli? Unfortunately I don't have any 
of those.

Regards
/Ronny


-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP, 
AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel