Date: Thu, 14 Dec 2006 17:25:46 +0800
From: amateur <ztl.post@gmail.com>
To: bluez-devel@lists.sourceforge.net
Message-ID: <20061214092546.GA6244@163.com>
References: <1166076796.3984.9.camel@localhost>
MIME-Version: 1.0
In-Reply-To: <1166076796.3984.9.camel@localhost>
Subject: Re: [Bluez-devel] Immediate disconnect after doing "hcitool cc"
Reply-To: amateur <ztl.post@gmail.com>,
        BlueZ development <bluez-devel@lists.sourceforge.net>
Content-Type: text/plain; charset="us-ascii"
Sender: bluez-devel-bounces@lists.sourceforge.net
Errors-To: bluez-devel-bounces@lists.sourceforge.net

On Thu, Dec 14, 2006 at 01:13:16AM -0500, Jon Barnett wrote:
> hcidump -X -V results for a hcitool cc command:
> < HCI Command: Create Connection (0x01|0x0005) plen 13
>     bdaddr 00:12:EE:E0:AB:CA ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
>     Packet type: DM1 DM3 DM5 DH1 DH3 DH5 
> > HCI Event: Command Status (0x0f) plen 4
>     Create Connection (0x01|0x0005) status 0x00 ncmd 1
> > HCI Event: Connect Complete (0x03) plen 11
>     status 0x00 handle 12 bdaddr 00:12:EE:E0:AB:CA type ACL encrypt 0x00
> < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
>     handle 12
> > HCI Event: Command Status (0x0f) plen 4
>     Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
>     handle 12 policy 0x0f
>     Link policy: RSWITCH HOLD SNIFF PARK 
> > HCI Event: Read Remote Supported Features (0x0b) plen 11
>     status 0x00 handle 12
>     Features: 0xff 0xfd 0x29 0x78 0x18 0x18 0x00 0x80
> > HCI Event: Command Complete (0x0e) plen 6
>     Write Link Policy Settings (0x02|0x000d) ncmd 1
>     status 0x00 handle 12
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
>     bdaddr 00:12:EE:E0:AB:CA mode 2 clkoffset 0x0000
> > HCI Event: Command Status (0x0f) plen 4
>     Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> > HCI Event: Max Slots Change (0x1b) plen 3
>     handle 12 slots 5
> > HCI Event: Remote Name Req Complete (0x07) plen 255
>     status 0x00 bdaddr 00:12:EE:E0:AB:CA name 'HBH-610a'
> < HCI Command: Disconnect (0x01|0x0006) plen 3
>     handle 12 reason 0x13
>     Reason: Remote User Terminated Connection
> > HCI Event: Command Status (0x0f) plen 4
>     Disconnect (0x01|0x0006) status 0x00 ncmd 1
> > HCI Event: Disconn Complete (0x05) plen 4
>     status 0x00 handle 12 reason 0x16
>     Reason: Connection Terminated by Local Host
> 
How long does it takes for your computer to send the disconnect
request? Maybe it is that bluez will automatically disconnect a
connection after some idle time.

-- 
An honest tale speeds best being plainly told.
		-- William Shakespeare, "Henry VI"

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel