Return-Path: From: Jon Barnett To: BlueZ development Date: Thu, 14 Dec 2006 01:13:16 -0500 Message-Id: <1166076796.3984.9.camel@localhost> Mime-Version: 1.0 Subject: [Bluez-devel] Immediate disconnect after doing "hcitool cc" Reply-To: jbarnett@pobox.com, BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============0388458075==" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net --===============0388458075== Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-dAbFirD5eh7VW8l3NzMo" --=-dAbFirD5eh7VW8l3NzMo Content-Type: text/plain Content-Transfer-Encoding: quoted-printable I have problems with the Broadcom BCM2045 connecting to a Sony-Ericcson headset (HBH-610a). It connects but it then immediately disconnects. This does not occur when using a Kensington USB bluetooth dongle so I know that connecting to the headset is possible. USB device info: T: Bus=3D05 Lev=3D02 Prnt=3D02 Port=3D03 Cnt=3D01 Dev#=3D 6 Spd=3D12 MxC= h=3D 0 D: Ver=3D 2.00 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1 P: Vendor=3D413c ProdID=3D8126 Rev=3D 1.00 S: Manufacturer=3DBroadcom Corp S: Product=3DBCM2045 C:* #Ifs=3D 4 Cfg#=3D 1 Atr=3De0 MxPwr=3D 0mA I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 32 Ivl=3D1ms E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 32 Ivl=3D1ms I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver= =3Dhci_usb E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms I: If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driver= =3D(none) E: Ad=3D84(I) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms E: Ad=3D04(O) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms I: If#=3D 3 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D00 Driver= =3D(none) hcidump -X -V results for a hcitool cc command: < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:12:EE:E0:AB:CA ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5=20 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr 00:12:EE:E0:AB:CA type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 handle 12 policy 0x0f Link policy: RSWITCH HOLD SNIFF PARK=20 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xff 0xfd 0x29 0x78 0x18 0x18 0x00 0x80 > HCI Event: Command Complete (0x0e) plen 6 Write Link Policy Settings (0x02|0x000d) ncmd 1 status 0x00 handle 12 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:12:EE:E0:AB:CA mode 2 clkoffset 0x0000 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:12:EE:E0:AB:CA name 'HBH-610a' < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 12 reason 0x13 Reason: Remote User Terminated Connection > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 12 reason 0x16 Reason: Connection Terminated by Local Host Is there something else I need to do to get this to work? Any help would be appreciated. Thanks, JonB --=-dAbFirD5eh7VW8l3NzMo Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQBFgOt8u2cEic/xsEARAk6HAJ9McUJ4Qs7wC6PueUTQIv3uS6CP0wCgm/qs ha2SG7kHDop5CVJQ+Txscv4= =xN5v -----END PGP SIGNATURE----- --=-dAbFirD5eh7VW8l3NzMo-- --===============0388458075== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV --===============0388458075== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel --===============0388458075==--